To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1782 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.I cannot grade the towing capability yet, but this review is on installation. Less than one hour from start till I was putting tools away on the same day of arrival.
One man job with the assistance of a rolling floor jack.
Put rear up on ramps, hit holes with wd40, used one bolt to test run all threads, did not unhook tailpipe, simply insert the plate in, over, and let it rest on on exhaust (majority of weight still supported by jack). Start with left side, place 1 bolt loosely and then continue to switch sides with two at a time. Used torque wrench at 68 lbs to finish securing. Done. Looks great too! Up next: electrical and trans cooler. Thank you etrailer for the product and videos. Bought the hitch bc of such great reviews.
This can be a one man job if you have ramps and a short step stool. The thing that made the install take longer than 30 minutes was that the bolts on the passenger side would not line up if the drivers side bolts were on. I had to remove all the bolts on the driver side and set the hitch on a step stool 12 inches high so that the driver side was about 3 inches away from the mounting location. This was the only way i could get all three passenger side bolts to line up. Torqued to 69 pound-feet and i was done. Three stars for those three bolts.
Randy C.
6/12/2015
I had the same problem and it was a nightmare. Why is everyone giving this 4-5 stars then? Box arrived was a joke. The the holes didnt align. Im curious whether the reviews are real or not.
I'm not sure how a hitch install could be any easier. It doesn't require two people because you can hang the passenger side of the hitch on the tailpipe while you start one of the bolts on the drivers side. By a mile, the hardest part is chasing the existing threads on the van. My van had traveled many dirt roads and the grime was thick on the underside. Still, this wasn't a hard job at all. I've included pics of the installed hitch and the 6 bolts (yes, only 6) that are required to do this job. We're going to the lake this weekend and we'll be pulling the popup behind us. We also bought a transmission cooler from this site as well and it's going to keep the transmission cool while we're hauling kids, bicycles, pets, and everything else down to the campsite.
Chris H.
6/8/2017
Now that a year has gone by Im happy to report that this hitch has been a great performer. No issues, troubles, hiccups, or regrets about this purchase.
Fit my 2014 Honda Odyssey perfectly. Instructions were great, simple quick installation. etrailer personal are very responsive. Installed in 2016 and now in 2023 still going strong. I use it for my bike rack. Website has tons of videos, instructions, informative information, pictures and reviews. I plan on purchasing a Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 58" Long
Item # MPG202 today to install on my mini van factory installed roof rack.
Easy to install and took 15 minutes with my son holding up the other end at the beginning. Just start all the bolts without tightening any so you can move it around to line up the holes. Once all started, tighten and torque them down to 68 ft/lbs. Looks great except there was a little section it looks like they forgot to paint. A little Rustoleum from the shelf covered it just fine. Very sturdy and I anticipate having no issues. It’s mostly just for our bike rack that requires at least 500 lb tongue weight. Our rack is a big one that holds 7 bikes vertically so we needed the capacity. I also have a lift and heavy duty bump stops to prevent excessive sagging…otherwise the rack could scrape the ground.
The small amount of instructions were very beneficial and helpful for installing the trailer hitch It was enough information to complete the job. And overall the task was pretty easy. I did not install any wiring, as my primary use is for a bike rack.
Hitch is still going strong. It holds the Velocirax Bike Rack from April to November with no problems at all. Highly recommend etrailer and their products.
Really great product. Fits my 2005 Odyssey like a glove. This was my very first installation and I can confirm that it can in fact be installed by a single person, without raising the car and without removing the exhaust pipe. It did take a while (probably 1.5 hrs total) to complete as I needed to clean the threads in the weld nuts. Following recommendation from someone on this web-site (i.e. one of the reviewers), I had purchased an M12 x 1.25 tap and it made the work super easy (initially tried just WD40 with steel brush with basically zero effect as there was some serious rust build up in the threads). I've positioned the hitch on two jack stands (which supported it at JUST the right elevation) and started "wiggling" it towards the car frame. The driver's side was a piece of cake. It took a bit of effort to squeeze the passenger side of the hitch in between the car frame and the exhaust pipe. Once that was completed, the rest was relatively easy. I forgot to mention that I did try to remove the exhaust pipe, but didn't manage to do so. It would have made the things easier, but in the end I ended up "deflecting" the pipe suspended on the rubber piece by hand in order to be able to work with the bolts on the passenger side. All in all, very nice fit, super strong and sturdy hitch and overall - a really great experience (and tons of satisfaction =). Thanks etailer.
We owned the trailer hitch receiver for over a year and it is perfect for our 5-bikes carrier. It’s sturdy and it was easy to install on our van. I would definitely buy from e trailer again!
Dan
5/14/2023
The trailer hitch still works. It is definitely good to have it and be able to use it. I recommend this product. Thanks.
This has been a great hitch for our Honda Odyssey. We just use it for our bike rack and have had almost no problems. It did get a bit dirty over the winter and needed a good clean-out for the bike rack to insert fully this spring, so be aware of that issue.
Free shipping delivered within 3 days! The bracket ends were sticking out of the box and had minor cosmetic scratches which did not affect installation or function. Hitch is over 40lbs, oversized & bulky shape so not a surprise to see that. I read installation would take hours and required ramp to raise back end but that was not the case for me. We're in SoCal where there's not much rain so cleaning mounting holes on the frame was really easy. A single spray of WD-40 and I was able to hand screw all 6 bolts. I only had to pop the tail pipe off the last rubber mount to get at the bolts on right side. I used 2 car jacks to lift up & position the hitch to be mounted (see pic). In fact not raising the back end allowed easier installation for me. The longest time was spent nudging hitch to get that last bolt in. Total job time - about 2 hrs from opening box to completion. Excellent hitch, strong solid feel, and much easier installation than expected.
Bought a trailer hitch for our 2009 Honda Odyssey. The only hitch (get it) was that it was delayed in shipping by one day. The delay was by UPS, not etraler's fault. We live in a remote part of California, so that's not very unusual.
The hardest part of the instillation was getting the rubber exhaust hanger free. A squirt of WD40 took care of that. It bolted up perfectly, as if it came from the Honda factory.
I also bought the trailer wire kit. My biggest anxiety was getting the interior panels off without damaging the clips. They came off easily and the wire kit installed as easy as the hitch.
Overall, it took about 2 hours from start to finish. That includes getting out the jack, stands, tools, being interrupted by my two year old a few times and cleanup.
I chose etrailer because of the price for a Draw-Tite hitch. I had found cheaper hitches online, but didn't know the brands. I trust Draw-Tite. We are in the market for a vintage camping trailer and this is what we need to pull it.
I told my wife that this was easiest part I've ever installed. It went as straight forward as the instructions showed.
Thank you etrailer.
Dave C.
4/28/2019
Our hitch is still working great. When the time comes to get a new vehicle, I’ll be looking to etrailer if it doesn’t already have a hitch. I’m very happy with my purchase.
I've had this trailer hitch installed and put to use for one year. It fits perfectly. I would say that you need two people to install it if you cannot put your vehicle on a lift. It's a little heavy to deal with while lying down. I'm very happy with my purchase.
Dear Adam,... I thought I had to fill -in all the stars, so I started from left to right...and I only needed to fill in the "excellent" star! I am impressed with the hitch and just had it installed late Wednesday. I had the first attachment of the bike holder also put on, but since I will be loading 300 lbs of artillery shells/shot into my van, I will wait until I finish teaching with them this weekend at at the PA Monument to set the bike hack up. I am very pleased with the quick delivery and the quality of the items! Please record my evaluation as excellent if it didn't get corrected!
Hitch was very easy to install per included instructions. The hardest part was holding the hitch in place while I installed the bolts. I used blocks of wood to hold the hitch in place. Thanks again for a quality product with easy installation!
George M.
6/7/2021
Its still proving to be a valued product!
Installed last weekend. Tourqed it last night all in all pretty smooth. I jumped the gun and purchased a tap to clean the holes up and I'm glad I did. 10 years of brine can really gum things up. The only thing I didn't agree with in the instructions was removing the exhaust support and getting the exhaust pipe to the side. To many chances to damage the rubber pipe hangar. I ended up jacking up the right rear end of the van to get enough ground clearance and did not have to disturb the pipe except a slight push to the side while putting the receiver in position. All in all pretty easy with a little preparation.
Ben
5/20/2019
Great. Still love it.
This was easy to install if your slightly handy and have some basic tools. The hitch has held a Thule swing arm style 4-bike rack, loaded with all 4 bikes. We have taken this hitch on a road trip from WA, thru ID and MT and to MN, and back. Unloading and loading for bike rides along the way. We have used this for multiple camping trip, again loaded with the Thule rack and all the bikes. Never once have we had any issue with the hitch. When you compare the price of a dealership and ordering off the internet (here) it was enough of a price difference to take the risk and this one paid off huge! So worth it! Do not use a dealer if you are ok installing this yourself. There are install video tutorials to follow. This product had been rock solid for our family. Oh, we have it on a Honda Odyssey, 2014. Sad we have no photos of it all loaded with the bikes. And funny, we just unloaded them all two days ago from a trip... sorry, but I promise it is impressive!
can be a one person job when following the video guide and do a little bit research,
this hitch is solid and sturdy, have been loading a 75 pounds ebike for a few weeks without any problem.
i built my own ramp using solid wood as many reviewers did.
Figo
9/24/2018
Still good
Excellent item , good purchase , it was amazing to go to vacations with my family
Moises
10/6/2023
After a year I can say we are very satisfied with the item, we traveled 3 times long distance on freeway, and we didnt have any issue with the product
I was lurking the etrailer site for about 3 months, then after reading all the consistent good reviews and watching the very informative video, I decided to go for it. I ordered the Draw-Tite because it was the same initials as mine, no really I did. Package arrived on time, kept an eye on it with the tracking number anyway. The DT hitch had all the necessary parts come with it. The only main flaw was a blemish on the cross-tube's finish. I dont think it will effect the product in the long-run, but I took a pic of it anyway, so we shall see. Installed it by myself, did not remove the muffler, about 45 minutes total and did not rush myself at all. Looks great, exactly as it appears on the website, so far so good. Put my Thule 2-bike carrier on it, works perfect. Adding a cargo rack this Memorial weekend to drive down to San Diego, this will be a true test. About a month in after install, I am noticing a couple "rust" spots in the receiver hole. That's a little weird for my area of Southern Cal, because it doesnt rain and I DO NOT park near sprinklers or water sources while in my driveway. Going to take a pic and let the etrailer guys know about it and see what they say...
Good hitch and pretty easy install. Took about 2hrs including wiring. I listened to other reviews and just bought a 12mx1.25 tap at Ace hardware. I used a ratchet and 9mm socket on the back of the tap. Used chain lube in the wholes and blew out with a air line when done. Propped one end on a jack stand and pushed the other end up to start bolt. The exhaust pipe is fairly simple to get out of the hangers if you use a pry bar like the install video show. Wiring was easy to install, only change I made was I drilled a small hole and fished the wires up under the bumper and thru. Eliminating the the need to let the wire hang out under the hatch. I cut the wires and respliced them together. Then siliconed around them to protect against water and rubbing against metal. They now tuck up behind the bumper cover with easy access. I'd say just about anyone can do this install with a couple tools and a little mechanical aptitude.
Well made.
Well priced. Period.
I've been browsing around the net for a trailer hitch for my '16 Honda Odyssey EX-res.
As expected and reviewed with lot of positive things about it, I decided to give it a try and Boom! It took me about an hour to install myself with help from my buddy to hold the side end. (He held it for less than 2 minutes and his job was done)
I did not have to jack up the vehicle, using the cardboard box it came packaged with it to put underneath while installing made the entire procedures so much easy.
I will update you with more photos in actions with cargo carrier and bike rack sort of things.
I am very happy with it.
^_________^
I received my hitch 2 days after I ordered it, actually it came in a day earlier than I expected. I installed on a 2004 Honda Odyssey, hardest part was lifting my arms up to get the first screw started. Found it easier to start the screws on the side without the tail pipe. I didn't have to lift the van, I was able to install it laying on my back, probably took me 15 minutes AFTER I got the first screw threaded. Everything lined up perfectly.
Chris
11/1/2017
since installing the trailer hitch, i guess not noticing it is a good thing, so must say i like the hitch. The reason i bought it was because of your instructions and videos showing me how easy it was to install on my Honda van. That was the biggest reason. I know some vehicles are more difficult for a dyi to add a hitch, so that is why i picked your trailer hitch.
Great trailer hitch for 2011 Honda Odyssey. Honda charges 10x as much to install an OEM part since it requires transmission coolers, electrical work, etc. I'm only interested in hauling a 4-bike rack, and this is MORE than sufficient! It blends in well with my black odyssey (similar finish to my paint), but 90% of the time it's completely hidden underneath the car.
Setup on the driver's side was a breeze. If you watch the video provided by etrailer, it's laid out plain as day! This side DOES have a cover over the pre-threaded holes, which meant I could snug the bolts down by hand. The passenger's side, which is not covered, was far worse. After 9 years of weather, these threads needed to be tapped. I wish I had just STARTED there instead of taking the effort of cleaning with a brush / failing to tighten the bolts first way through. In order to tap the threads, you're also going to need to unhook your tail pipe and move it out of the way (easy to do, just grease the rubber holder).
If you're not performing regular repairs on your car, your socket wrench set MIGHT not have the required 35mm socket! That was a frustrating delay on my side, and a surprising one at that!
While I used ramps to make it easier to tap the threads on the passenger side - it wasn't required. In fact, when I realized I had forgotten to re-attach the tail pipe I had more than enough clearance to crawl under the trailer hitch and get access to the underside of the car.
Great purchase. I'd do this again in a heartbeat!
Great trailer hitch, easy installation!
Excellent service by etrailer.com!
Using it primarily for my bike rack; unfortunately, picture doesn’t show much of the trailer hitch, sorry.
Folks at etrailer are VERY customer oriented, friendly and and thorough!
Highly recommend this company!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jarrett N.
3/9/2016
Wonderful. Great towing hitch. Looks clean, sleek, and strong. No problems at all. Well pleased! Have used numerous times for towing.