bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 75237
In Stock
$196.54
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75237 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (392)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 75237

  • Class III
  • 2 Inch Hitch
  • 4500 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 675 lbs TW
  • 5000 lbs WD GTW
  • 675 lbs WD TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 675 lbs
      • Maximum TW when used with weight distribution: 675 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75237 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87698 Hidden Hitch Class 3 Trailer Hitch Receiver

Replaces 75149, 75696, 87415

Installation Details 75237 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75237

Average Customer Rating:  4.7 out of 5 stars   (392 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

Fit my 2009 Sienna Limited perfectly. Only had to disconnect one exhaust hanger closest to the tailpipe. Had to borrow a thread restorer kit from the auto parts store to clean a bunch of dirt and corrosion from the vehicle frame bolt holes. Once what was done the install was simple simple simple. Thanks!



by:

Fit like a glove. Although keep in mind if you live in the Midwest and your Vehicle is over 15 years old like my 06 sienna you may have to rethread the holes instead of spending three hours cleaning weld nut holes. Although once you have everything ready to go if you have an assistant it goes fast.



by:
2006 Toyota Sienna

The trailer hitch kit fit my van perfectly and was easy to install. I'm very impressed with how heavy duty this is for the price. Shipping arrived quickly as well. Thank you so much!



by:
2007 Toyota RAV4

This review is a little about the hitch, but more about the installation process in hopes of helping others and saving them some additional money.

First of all, we bought two hitches: 1) 2004 Toyota Sienna = Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - Item # 75237 and 2) 2007 Toyota Rav4 = Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75235.

Both frames arrived in excellent condition despite one of the boxes being damaged in shipping. They are obviously well built and meant to fit the specified vehicles. etrailer.com understands how to match vehicles and hitches. Both hitches fit perfectly and no alterations were needed for the hitches. We just finished installing them yesterday and look forward to using them with our new bike rack.

Installation hints:

1) Make sure you have everything (tools, lubricant, brush, etc) ready and organized before you try to install your hitch. In my case, I was missing some tools I thought were in the garage and had to make other arrangements. The installation time in the etrailer videos (extremely helpful) is only accurate if you have everything prepped and you don't have any problems with the weldnuts (see #2 below). The actual installation is surprisingly straightforward and could be completed in close to the estimated time.

One item you will need, that you might not have, is a torque wrench. Here's the first money saving tip, check with your local auto parts store, to see if they participate in a tool loaner program. Basically, you pick up the tool from their store and pay a deposit (which is the price of the tool), use it, return it, and get your deposit back. While many guys are looking for excuses to buy more tools, I opted to borrow a torque wrench as I don't see myself needing one in the future. If I do, I know where to borrow one :)

2) If your vehicles are a bit older, or if your vehicles operate in wet or snowy areas, there's a very good chance the vehicle weldnuts (threaded inserts - this is where the bolts will thread into) will have dirt, grime, and rust built up in the inserts. I strongly recommend taking the time to make sure your bolts will go into the weldnuts before you mess with the hitch installation.

The weldnuts on our 2007 Rav4 were in great shape and only required me to spray in some lubricant (Sea Foam Deep Creep) and clean out with a wire tube brush (Nylon Tube Brush - 1/2" Item # 814092 etrailer.com). If I hadn't done this simple step, I wouldn't have been able to get the bolts to thread. Once I did this, the install was simple. I didn't spent much time doing this.

Our 2004 Sienna was a different story. Besides being 3 years older, it also came from an area with more snow and they likely salted/treated the roads which contributed to the problem. Using the lubricant and brushing out several times was not sufficient to get the weldnuts clean enough. The good folks at the local auto parts store listened to the description of the issue I was facing in this installation project. The gentleman helping me said something like, "It sounds like you need to chase the threads to clean them out. We have a thread restorer kit in our tool loaner program." (see two screen shots from their website). I knew what a tap was, but hadn't heard of a thread chaser. I was able to use the thread chaser to clean out all of the junk built up in the weldnuts. In my case, this was a major project as they were in bad shape. I was also being cautious as I didn't want to mess up the threads. Some of the weldnuts required me to go part way in with the thread chaser, bring it out and clean it, relubricate the weldnut and chaser and go again several times. Some of the weldnuts were less problematic. In short, if you run into this issue, see if you can borrow this kit. The thread chaser is designed to be used with a socket and socket wrench. Always start the thread chaser by hand to ensure it isn't cross threaded. Once you're certain it's in the correct way, start slowly with the socket wrench or a drill with socket adapter. The instructions that come with your hitch will provide the specs on the bolts. In our case it the bolts were M12 x 1.25 (I think M12 has to do with the diameter of the bolt and 1.25 refers to the thread pitch (or spacing).

3) Torquing the bolts to spec. The bolts are in an awkward place to work with and torquing them to specification can be a challenge. The Rav4 process went well and I was able to complete this step on my own. Perhaps I was worn out while working on the Sienna or having trouble with the torque wrench, but I finally gave up to seek help. I didn't want to break the bolts! I ended up stopping by the shop which services our vehicles and they torqued to bolts to spec. Because we take our vehicles there on a regular basis, they didn't charge me to take care of the 6 bolts.

In conclusion, if you prepare for the install by getting everything ready and your weldnuts are in good shape, this is not a difficult installation project. One of our hitches had 6 bolts and one had 5 bolts. Not rocket science. If your weldnuts are full of junk, try the steps I've mentioned above. Good luck.



by:
2016 Toyota Sienna

I purchased this hitch for my wife's 2016 Toyota Sienna. I chose this particular model because the reviews said that it had the most clearance. Once installed, it is even with most of the mechanicals on the bottom of the vehicle. While it doesn't reduce your ground clearance, it could easily have been designed to sit an inch or so higher. However, because it isn't flush against the vehicle, I was able to get the plastic trim piece back on the van with very little trimming. I suspect that there must be fairly significant differences on the rear pan as some of the reviews indicate they couldn't reuse the trim piece and the instructions show cutting away most of the plastic. Either the rear pan for the cargo area was slightly smaller on previous year's models or the one I received had been dropped and the mounting flanges bent towards each other. Though there was no visible damage. The mounting flanges were about 1/4" to 1/2" to narrow for the 2016. Because of this, what should have been a 1 hour job turned in to a 4 hour job. Having to convince the mounting flanges in to place caused more than significant issues. I marked the product down for this reason. I've never had an issue like this with items from etrailer so I'm guessing the Toyota engineers must have made small, but troublesome size changes on the 2016.



by:

It's very solid, and supports our bike rack just fine. It was installed on a 2007 Toyota Sienna and I had to take it to our local auto shop because I didn't have a tap and die set to bore out the rusty pre-drilled holes. It does sit a little low, so be careful when backing up near curbs. You'll definitely scrape! Otherwise, very happy with it so far. Oh, and the shop had to adjust our exhaust a little bit because it hit the hitch receiver when we hit bumps.

Kevin

5/5/2022

Still very solid, starting to show minor signs of rust on outer edges and inside the hitch receiver which is understandable.



by:
2014 Toyota Sienna

Couple of things. 1) The shipping box was full of holes by the time it showed up at my house. A few minor scratches here and there but no big deal... except I wondered what I would do if I had to return the hitch for some reason. Luckily, I didn't have to return it. 2) I installed it on a 2014 Toyota Sienna. One word of caution, the under carriage appearance panel that you have to remove in order to install the hitch has been modified by Toyota for 2014. The under panel has an inch wide convex hump that runs across the entire length right above where the cross bar of the hitch goes. Therefore, if you choose to re-install the under panel along with the hitch, as I did, the under panel will press down against the hitch and you will have to made some adjustments as you tighten the screws of the hitch as well as the under panel. I am attaching a couple of picks that show how the under panel is now pushed in.



by:
Ram 2500

One year in and this is a fantastic hitch! The only reservation I have is that it definitely sits low and frequently we scrape it. However, there is no other hitch that solves that problem.

Manufacture - solid and durable
Install - very straightforward, we had to do a limited amount of cutting to the plastic undercarriage protector, easy to do with snips or a box knife.

We used a 4 bike carrier in it for a 2500 mile trip with zero problems.



by:
2010 Toyota Sienna

have ordered from etrailer.com twice now. Both orders were perfect fits for both vehicles. The wiring harnesses that they sell are perfect fit as well. I would suggest purchasing from etrailer.com any day. One piece of advise I suggest for people installing on a slightly used vehicle: when installing tow hitch, use a tap to clear out the threads on the bolt holes before attempting to install, doing this will result in a much easier and pain free installation. I installed mine on a 2010 Toyota sienna LE van AWD. There was no trimming required on anything, even though etrailer said there would be. Overall a simple installation.



by:

The holes didn’t line up well at all. Ended up partially stripping out a hole and had to rethread it. Also it sits too low to the ground. Go over any bump or slight downgrade in a driveway and it scrapes. Why even sell this unit? Had to get a lift to stop hearing ot drag.



by:

When it was received there where two large sections of missing black paint on each end of the mounting plates. Lucky I had some black enamel spray paint and time to prep cure it before needing to install it. Installation went well. Recommend taking the time to cut the rear under tray to accommodate the hitch vs. running without the under tray installed. All is holding up well now a year later

Daniel

7/18/2023

I’ve used it a handful of times now over the course of a year to pull a small trailer. No issues. Holding up well.



by:

Top notch product. Straightforward installation. And etrailer provides the best customer service I've seen.



by:
2013 Toyota Sienna

Shipping was super quick and I was extremely happy with the high quality of the hitch. The videos are great information to assist in installing your hitch. I did not even jack up the van nor use a lift. A lift would make the installation even easier. I am not by any means a mechanic, and I was able to complete the installation within about 45 minutes. An extra pair of hands is a must to help get the bolts lined up and started. This hitch should hall quite a load, and I am guessing that the tongue of the trailer would break before this hitch would if properly torqued in to place. Since my van sets lower than most trucks and the hitch is low, I chose an adjustable height receiver for the finishing touches. Thank you etrailer.com



by:
2017 Toyota Sienna

This was my first purchase thru etrailer.com . And what else can I say other than it doesn't get any better than this !!!!..
1st off - Great "low" prices for what looks to me , as well made products ..., that look it will last the lifetime of the vehicle no problem !
2nd - - My order came in when they said it would .., with no issues !
3rd - It fits perfectly , with no alterations needing to be made to it !
4th - With all the information and " honest " ..., product evaluation videos they provide on this site ..,, it was easy to make an informed decision on what was what , without being able to put my hands on them in person ... This is " HUGE "in my book !
Excellent job etrailer !
I will be back for more
Johnny B .....
This is a picture mid installation ... The things we do when working alone .



by:

8”from the ground, strong frame and very nice shape I’m very happy Toyota Sienna 2020



by:
2011 Toyota Sienna

Hitch shipped quickly. Took 75 minutes from start to finish to install on my wife's 2011 Sienna. The decorative cover Toyota felt needed to be installed on the underside of the storage area took longer to remove (safely), cut to fit around the hitch and replace than installing the hitch itself.



by:
2015 Toyota Sienna

GREAT company to work with!!!! Will continue to buy from etrailer. The hitch is exactly as advertised. Solo installation took only 75 minutes. Used a small scissors jack as a “helper”. Fit perfectly and bolted right on.

Again, great doing business with you!!!



by:
2016 Toyota Sienna

Absolutely recommended -- we've had zero trouble with this on our 2016 Toyota Sienna SE -- also appreciated the mounting bracket tab for the trailer wiring plug. It *can* be installed solo, if you're handy and patient, but it always helps to have another set of hands to hold things in place while you get some of the bolts threaded.

I don't hesitate to recommend this to anyone looking for a good receiver for their minivan! (make sure you get a hitch/ball mount at the right height for your trailer/vehicle set up -- I had to figure out how to add about 4 inches to the height to get the trailer hitch to the correct height, from my mini-van).



by:
2015 Toyota Sienna

Definitely try top have someone help you install, it makes the job much easier. I did it myself and it was tedious but Do-able. Videos make it very helpful and trimming the skid plate is also a pain. Be careful when removing the plastic trim tabs because they can be brittle due to there location. Overall I am very happy with the installation and it looks and functions well.



by:
2014 Honda Odyssey

Best price and value for item. I did have a second person to help mount on the 2014 Honda Odyssey. We also cut a piece of the bottom shroud on driver side to install the original screw or plastic tab. I also got 2 caps and silicone them to plug up the two ends.



by:
2013 Toyota Sienna

Unit was shipped fast and arrived as planned. Installed the unit in a hour or so and went well for one person doing it. I think two people would be the best to lift it up into place. I used a car jack and stands to hold it up and I will be wiring the lights shortly. Ian from the customer service gave me all the options and what the benefits for each one was then helped me make a decision based on my needs. Can’t wait to pull the camper!



by:

Ordered this, but did not take it out of box to put on right away. Unfortunately when I took it out, it was bent with what appeared to be spray paint over bent area as paint was cracked. I ended up contacting customer service. It was too long since I bought it. I ended up having local mechanic bend it back and install. It ended up working out. I expected better quality up front. I have previously had good experiences. Would still consider doing business. In the market for a grille guard.

Etrailer Expert

Jenny N.

3/14/2022

It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment to allow for installation.



by:
2012 Toyota Sienna

Pretty easy to install, bolt holes aligned perfectly with my 2012 Sienna's factory frame welded bolts for mounting a hitch. No need to jack up the van. Some trouble lifting into place to start the first bolt. Tongue load rating is very good to carry my heavier 450 lb motorcycle on a motorcycle rack, instead of trailering to avoid 55mph limit on freeways.

Raymond

2/26/2023

No problem after 1 year of occasional use for bicycle and a 450 lb motorcycle rack uses.



by:
2009 Toyota Sienna

The paint is peeling off right out of the box. I ordered for a 2009 Toyota Sienna and the paperwork says 2011 and newer. That may explain why the 12x1.25x40 bolts didn't fit. The frame mounted nuts are 7/16 fine thread. Thank's for asking.

Etrailer Expert

Brooke M.

7/12/2023

This hitch is a confirmed fit so I reached out to the manufacturer. They said it sounds like all you need to do is brush out the weld nuts on your vehicle. If that doesnt solve the problem, please reach back out and we can go from there.



by:
2010 Toyota Sienna

Veddy naice as Borat would say!


25
392
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Mounting Bracket for 4-Way Flat Trailer Connector on a 2006 Toyota Sienna w/Wiring Harness 118304
    Yes there is a 4-Way mounting bracket you can use for the flange on Draw-Tite trailer hitch # 75237 for your 2006 Toyota Sienna. You can use bracket # 18144. The hardware pictured with it is also included.
    view full answer...
  • Will Draw-Tite # 75237 Work on a 2016 Toyota Sienna SE
    I spoke with my contact at Draw-Tite and he informed me that this Draw-Tite # 75237 should work on your 2016 Toyota Sienna SE. I asked about the lower trim piece that the SE models have on them and he informed that there will be an appearance panel that will need to be trimmed or removed in order for you to install the hitch but it will work for you.
    view full answer...
  • Recommended Equipment Needed for a 2011 Toyota Sienna XLE to Pull a Boat Trailer That Has Brakes
    The trailer hitch receiver that I recommend installing on your 2011 Toyota Sienna XLE is the Draw-Tite Max-Frame Trailer Hitch Receiver # 75237 as it is a confirmed fit and has the highest weight capacities of all of the available options for your Sienna. It has a Tongue Weight (TW) rating of 675 lbs and a Gross Trailer Weight (GTW) rating of 4,500 lbs which is increased to 5,000 lbs when using a Weight Distribution system. This is a fairly easy install which I have attached a video that...
    view full answer...
  • Recommended 2 Inch Trailer Hitch for 2013 Toyota Sienna XLE
    For your 2013 Toyota Sienna XLE, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75237. This is a Class III trailer hitch that will provide a 2 inch receiver opening and a tongue weight capacity of 675 pounds. I recommend this model over the alternatives also confirmed to fit your vehicle because of its higher capacity and less involved installation process. I have attached an install video that you can use for reference.
    view full answer...
  • 1-1/4 inch Trailer Hitch for 2019 Toyota Sienna
    While we don't have any Class I hitches that fit your 2019 Toyota Sienna we do have Class II hitches which are the same 1-1/4 inch hitch size like with the Draw Tite # 36513. This essentially would function exactly the same as a Class I and would be the same size but would just have more weight capacity than you'd need. Then for trailer wiring you'd just need the part # 118648 which I attached an install video link for on this page as well as an install video for the hitch.
    view full answer...
  • Trailer Hitch Recommended for 2016 Toyota Sienna
    According to Reese, their # 37096 hitch is a fit for earlier model domestic full-sized trucks, and wouldn't fit your Sienna. Your best bet would be the Draw-Tite Class III hitch, part # 75237 which is a custom fit for your Sienna. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118648 which fits all BUT the SE model or # 118498 for the SE. You'll also need a ball mount like # C45100, a hitch pin like # PC3 and a hitch ball like # 19260 for a 1-7/8...
    view full answer...
  • Why Does Draw Tite Hitch # 76112 Have Longer Install Time Than Other Hitches
    The reason the part # 76112 takes longer to install than the other hitches that fit your 2017 Toyota Sienna is that it installs higher than the other hitches and only has a visible hitch opening where the other hitches hang down further below. I attached two pictures. The one that shows the underside of the rear of the vehicle is the # 76112 and the other is the # 75237. So long story short, the # 76112 gives you a hidden look that is much more desired and also has the hitch a bit higher...
    view full answer...
    Image 1 for Image 2 for
  • Ball Mount for with More than 11 Inches of Rise to Tow Trailer Level with 2012 Toyota Sienna
    What I recommend is to use Convert-A-Ball cushioned ball mount # AMSC12 and then add a high rise ball. The ball mount takes a ball with a 1 inch diameter shank. If the trailer coupler takes a 2 inch ball use high rise ball # C40034. If you need a 2-5/16 inch ball there isn't a high rise version that would fit so you would need to use a regular ball # 63847. If the coupler does take a 2 inch ball then # AMSC12 with # C40034 will provide you with approximately 12-3/4 inches rise and you...
    view full answer...
  • Trailer Hitch Recommendation for 2020 Toyota Sienna to Use 4-Bike Rack
    Going with the Draw-Tite is a smart choice because they have proven over time to be the highest-quality manufacturer of trailer hitches, and this is definitely the brand I would use if it were my 2020 Toyota Sienna. Between the two Draw-Tite hitches you asked about, I recommend the Draw-Tite Trailer Hitch Receiver # 76112 because it has a concealed crosstube, which gives you a number of advantages over a hitch that has a visible crosstube, such as the Draw-Tite # 75237 you mentioned. When...
    view full answer...
    Image 1 for Image 2 for
  • Comparing Trailer Hitch Options for 2020 Toyota Sienna
    There are a handful of trailer hitches that fit your 2020 Toyota Sienna and they can be broken down into a few categories. Since you are wanting to use a 4-bike rack you need at least a 2" Class III receiver so you are just looking at visible crosstubes and concealed crosstubes. The visible crosstubes include the Draw-Tite # 75237, Curt # C13105, and etrailer.com # e98837 while the concealed options include Draw-Tite # 76112, Curt # C13343, and etrailer.com # e98853. I recommend the etrailer.com...
    view full answer...
  • Best Trailer Hitch Receiver for 2018 Toyota Sienna
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 75237 is the best trailer hitch receiver in my opinion for your 2018 Toyota Sienna. It has the 2 inch receiver to give you the most options and is the easiest to install. It also has the 675 lbs tongue weight rating which is the strongest of all our options for your vehicle. There is some trimming of an underbody panel required, but there is no fascia/bumper trimming required. If you will be towing with this trailer hitch then I recommend...
    view full answer...
  • Difference Between Trailer Hitches for 2020 Toyota Sienna
    That's a good question and there is one significant difference between all the trailer hitches that fit your 2020 Toyota Sienna, which is the visibility of the crosstube. The best, most high-quality trailer hitches are from Draw-Tite, so we will use two of their hitches that fit a 2020 Sienna as an example. The Draw-Tite # 76112 has a concealed crosstube while the Draw-Tite # 75237 has a visible crosstube; you can see the difference in the accompanying photo. The capacities of the hitches...
    view full answer...
    Image 1 for
  • Trailer Hitch, Ball Mount kit, Trailer Wiring, and Transmission Cooler for a 2007 Toyota Sienna
    I can certainly make some recommendations for a towing set up on your 2007 Toyota Sienna. Starting with a trailer hitch, the most popular hitch for your vehicle is Draw-Tite # 75237. This is a Class III hitch rated for 4,000 pounds gross trailer weight, 400 pounds tongue weight. The trailer you plan to tow is right at this limited. If there is any way you can reduce the weight of the trailer some, it would be more ideal. I have included a link to the installation details and a video showing...
    view full answer...
  • Which Class III Trailer Hitch Receiver Provides Most Ground Clearance for 2007 Toyota Sienna LE
    If you're looking for a class III trailer hitch for your 2007 Toyota Sienna, either the etrailer # e98837 is going to offer the most ground clearance. This is especially important when considering hitch mounted accessories like bike racks, cargo carriers or ball mounts. Measuring from the ground to the top inside edge of the receiver tube opening, # e98837 will offer approximately 11-1/2". On the other hand, the Curt # C13105 offers 10-1/4" and the Draw-Tite # 75237 only offers about 9-1/2".
    view full answer...
  • Recommended Trailer Hitch Receiver And 4-Bike Bike Rack For A 2020 Toyota Sienna
    For your 2020 Toyota Sienna I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75237. This trailer hitch is a simple no-drill bolt on design. It has a maximum 675lb tongue weight capacity to easily handle the weight of your four bikes. It has a black powder coat finish covers e-coat base for superior rust protection. For the bike rack I recommend the Hollywood Racks Destination Bike Rack for 4 Bikes # HR4000. This rack has a per bike weight capacity of 35lbs and weighs 42lbs...
    view full answer...
  • What Is Ground Clearance From Ground On 2007 Toyota Sienna With Trailer Hitch Installed
    The distance from the bottom of the # 75237 trailer hitch to the ground is approximately 7-1/4 inches. Please keep in mind these dimensions can vary based on the suspension or tires and wheels that are installed on a vehicle, but on the model we installed the hitch on this was the measurement we got.
    view full answer...
    Image 1 for
  • Best Hitch Reciever for a 2020 Sienna AWD LE
    You are not going to want to exceed the capacity of either the hitch or your 2020 Toyota Sienna's so I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75237 and worrying about any protentional clearance issues if you encounter them. This hitch is custom fit and bolts directly to your Sienna's frame with included hardware. I have linked an installation video below. If you do not have a wiring harness you will need a 7-way to control both your trailer's lights...
    view full answer...
  • Comparison of Available Class III Hitches for 2020 Toyota Sienna
    The main differentiation between the available Class III hitches is how they'll appear once installed. The etrailer brand # e98837 and the Draw-Tite # 75237 will have the entire hitch visible under the rear bumper. In contrast, the Draw-Tite # 76112 and the etrailer brand # e98853 will have the crossbar nicely tucked behind the rear bumper, with only the receiver opening and safety chain loops being visible. The concealed type hitch also allows about 2 more inches of ground clearance, which...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2015 Toyota Sienna
    It sounds like you are looking for a trailer hitch for your 2015 Toyota Sienna. For this, I recommend the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75237. This Class III hitch is confirmed to fit your Sienna and it will use existing holes in the vehicle's frame for a no-drill installation. This will provide you with a 2 inch receiver that will work great for hitch-mounted accessories like bike racks or cargo carriers. I have attached an installation video on your vehicle...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2007 Toyota Sienna
    The best fitting and best priced hitch we offer for your 2007 Toyota Sienna is the Draw Tite part # 75237 which is a confirmed fit. This hitch has more than enough capacity for a jet ski trailer as well. I attached an install video for that for you to check out as well. For trailer wiring you then would want the part # 118304 which is confirmed as a fit and is the most reliable option we have. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900....
    view full answer...
  • Attaching Trailer Connector Bracket to Draw-Tite Class III Hitch 75237 on a 2013 Toyota Sienna
    The Draw-Tite Class III hitch, part # 75237 provides a mounting flange for a trailer connector bracket which is sold separately as part # 18144. The bracket would bolt directly to the flange that's already welded to the hitch using the included hardware, as you can see in the photo I've edited for you.
    view full answer...
    Image 1 for
  • What Are The Dimensions Of The Draw-Tite Trailer Hitch 75237 For A 2010 Toyota Sienna?
    We sure do. I had our warehouse measure the Draw-Tite Trailer Hitch # 75237 you were looking at for your 2010 Toyota Sienna and it measures 53-3/8" measured center to center of the mounting holes, 1-5/8" between the furthest rearward and middle mounting hole, 6-1/4" between the middle and further forward mounting hole, and 5-5/8" from the top of the mounting flange to the top of the receiver. I made diagrams showing all of these measurements, and included a video showing this hitch being...
    view full answer...
    Image 1 for Image 2 for
  • Differences Between Curt and Draw-Tite Trailer Hitches for 2020 Toyota Sienna
    This is a great question and I can definitely understand being a bit overwhelmed trying to work through all the available hitch options for your vehicle. Just to cut right to it I specifically recommend the Curt Class III Trailer Hitch # C13343 for your 2020 Toyota Sienna and I will go through my reasoning below. Both Curt and Draw-Tite offer two different 2" trailer hitches for your 2020 Toyota Sienna and they can be easily categorized into hidden and non-hidden options. The Draw-Tite...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch and Wiring Recommendation for 2015 Toyota Sienna
    For your 2015 Toyota Sienna the Draw Tite hitch part # 75237 would be what you would want. This hitch has plenty of capacity, is priced great and is a confirmed fit for your vehicle. The round crosstube would be it less visible than a square tube hitch as well. I attached an install video for you to check out too. For trailer wiring you would need the part # 118648 which I attached an install video for as well.
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.