Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Roadmaster's EZ Twistlock series brackets are virtually invisible, easy to mount and simple to remove. Brackets install on your vehicle's frame to provide attachment points for your tow bar.
Features:
The drawbars, or front arms, on the EZ series base plate kit are supremely easy to mount and remove. Just insert them into the brackets and twist to lock them in place. To remove, simply twist the arms back and pull them out. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
Average Customer Rating: 4.8 out of 5 stars (444 Customer Reviews)
Roadmaster's EZ Twistlock series brackets are virtually invisible, easy to mount and simple to remove. Brackets install on your vehicle's frame to provide attachment points for your tow bar.Perfect, a product that is rugged and long lasting, this can be purchased without worry. The sales rep I talked to was relentless in finding the right fit for my Honda Fit. Kudos
Very happy with this product. Installation was pretty easy. I see no reason to pay someone to install this. True you have to take the bumper off and a large metal support beam but it was pretty easy. You just have to take it slow and not get frustrated. The bumper on the Honda Fit is held on with a gazillion little plastic clips and snap joints. Everything fits tight on a Honda so you have to be patient. My only complaint is they don't give you the exact torque settings. I had to consult a shop manual to get the correct torque values. They give a table at the end of the instructions that gives common torque values for various bolt sizes. I thought that was lame they could have given the correct value from the shop manual. Certainly not enough to lower my rating. This bar is awesome and when the drawbars are removed the base plate is almost completely hidden. My wife wanted nothing to show on the front of the car. She was very pleased with it.
In the picture attached the bar is almost completely hidden. All you see are two small black circles. It takes about 2 seconds to mount the drawbars, just twist and go. VERY sturdy. I tow my Honda behind the motorhome with confidence.
The installation on this was surprisingly quick on my 2011 Fit (base/non-sport version). Everything fit well (no pun intended).
A few minor changes over the video as my car was slightly different:
- I didn't have to trim anything on the air dam -- the tubes lined up perfectly with the slots on my grill.
- There was a in the wheel on each side where the plastic bumper meets the steel body panel. I didn't realize they were there (they're hidden somewhat) so I ended up cracking the hole this screw was in, but everything came back together nice and tight anyway.
Tori was great!!!
Fast delivery and fantastic customer service.
Prepared my vehicle for the base plate. The base plate has a manufacturing defect in that the crossbar is approximately.375 inches short. The hole pattern matched on one side but the other side would not line up with the vehicle holes. The mounting plate overlapped the mounting holes by 1/3rd. Clearly, the assembly was short. I find my disassembled vehicle sitting for a week waiting for the replacement to arrive. Hopefully, Roadmaster QC did a better job on the new base plate assembly that I am waiting for.
I was having problems with the bracket that was on the car when I bought it and when it no longer felt safe to me, I looked on your website for a replacement. Lo and behold, this product appeared to be better designed and an easier installation. Putting 8t on today proved that. I am very happy with the product and your service. Thank you very much!
I did purchase this base plate for my Honda Fit that I flat tow behind my motor home, the product was installed as shown with absolutely no issues, and I continue to tow my Honda regularly, I would consider a great investment and well worth the money I spent.
Frank D.
6/27/2021
We have towed the Honda many times behind our motorhome and haven’t had any issues.
I have made purchases for two different vehicles. Both were used for four wheel down towing. Each time etrailer gave me correct information on the products and promptly shipped and delivered them. Best of all they fit correctly and no surprises. I will use them again.
Rick I.
5/5/2018
thank you for touching base with me. All the products seem to be fine.They are in use
The Roadmaster EZ Base Plate for my Honda Fit is very heavy duty - well built. The on line Video and the included instructions were excellent. I did encounter one problem during the installation - 2 holes in the mounting plate on the passenger side did not quite line up. I had to enlarge the 2 holes about 1/8 inch toward the outside of the car to make it work. The receivers fit nicely through the grill with no adjustment to the grill.
I recently ordered a flat tow base plate for a 2011 Honda Fit. I need to review that product too. It was a pain getting it mounted as the bracket didn't quiet fit as it was supposed to. But that is Roadmaster's fault and not yours. I will contact them to complain.
Thanks for the followup!
Tow Bar System is obviously part of a full set of kits that are installed in out Honda Fit and towed. I installed the system and fit great. No complaints and it’s easy and quick to hook up each time and works as it should.
I have used Roadmaster hitches and baseplates on several vehicles over the years. The purchase experience with E-Trailer has consistently been excellent. The baseplate is high quality, easy to install, and an excellent fit!
Thanks!!
I like the Roadmaster tow bars but I am 2 for 2 with fitment issues. The one bolt hole did not line up with the frame, after trying to adjust and take measurements for an hour, I had to grind about an eighth of an inch on the frame hole. This issue doubled the installation time. Had a similar issue with my Miata tow bar 7 years ago, but had to enlarge hole on tow bar. The etrailer video was excellent and this would have been a simple install if the tow bar fit.
Base Plate went in without any problem. The on-line video helped tremendously especially when removing the plastic bumper. A little more information could have been prided on disconnecting the fog lights on the Sports model of the Honda Fit. But I was able to take out a few more screws and get access to the plugs. The base plate is barely visible and I love the twist and lock feature on the base plate. Much better than the old pins and clevis on older base plates.
The etrailer video instructions to install the base plate was very helpful and enabled easy installation.
Shipment was within 48 hours of order
Would use etrailer again.
Sequence of events can aid in easier installation.
1. Problem: I found threading the bolts into the weld nuts that are located on the bars that slide into the frame was very difficult.
Solution: I took off the baseplate and chased the threads with a 1/2 - 13 tap to clear out the powder coat paint and the bolt easily threaded in by hand.
2. Problem: When I tried to get the base plate bolted on, I did the front facing bolts first then tried to align the slide in 3/4" bolts next. I couldn't get them in. I read a review where someone had to grind the frame to get the slide bolts to align. There had to be a better way without modification.
Solution: When the front cowell has been removed and the baseplate is hand held in position on the FIT, thread the 3/4" head bolts into the slide in brackets BEFORE putting the 12 mm bolts into the brackets that face forward. In my case the bolts went in without any difficulty. If you follow my suggestion you too can avoid grinding.
Prompt Delivery!! Incredible packaging with no chance of any damages.
The instructions were great and total install took just over 2 hours.
Thanks again!!
Bill H.
1/7/2015
Honestly, since installation the use of the tow bar has become an automatic. To say I have not given it a single thought is the case. Simply stated it works as expected. Thanks for a great product!!
Great experience!! Etrailer folks were very helpfull answering all my questions with good knowledge of their products. The tow bracket shipped out and was delivered on time as promised. This Roadmaster bracket fit perfectly. I'll continue to do business with etrailer.com
This was a great kit to work with. Instructions made it simple. It took longer to put the car back together than to put the base on.
I would highly recommend this product . I am a 74 year old women and I tow my 2010 Honda Fit with ease. Buying this product thru E trailer really saved me a lot of money with their free shipping. Juanita did a great job helping me order it. I will return here again if I ever need anything more.
I already had the tow-bar and only needed the hardware on the toad side. Cathy was very helpful and quickly determined the needed parts. etrailer offered free shipping and a few days later I received the shipment.
This product is a poor fit for my 2012 Honda Fit. The holes along the side which go into the frame rails are a few millimeters too far forward. Better-positioned holes would have saved me a couple hours of frustration.
eTrailer was great, shipped promptly, and for free!
Arrived very fast with free shipping and complete installation instructions. Would not hesitate to buy here again
I ordered the baseplates to tow a Honda Fit. The procuct arrived on time, Had very good directions, & installed in about 2 hours. A very clean installation, very well represented. Tghe on line video was really a big help. Kudus to all of you. D
first class company etrailer!Purchased base plate on 8/21 and it was delivered on 8/26 at 1:00PM; by 2:30PM installation was complete! This is a simple installation and the 521190-1 matched my Honda Fit Sport 2009 perfectly. "Life is Good"!!
Good instructions, easy install & seem to be a good product. I was short 2 fiber washers ,called Joshua and he sent them right to me. Thanks Josh.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thomas
7/17/2023
This product continues to meet or exceed my expectations. I have had no issues or problems with it.