bing tracking image
  1. Heavy Duty Receiver Hitch
  2. Draw-Tite
  3. 2 Inch Hitch
  4. 16000 lbs GTW
  5. Class V
  6. Weld-On Hitch
Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2"

Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2"

Item # 41990
lowest price pledge
Retail:$267.46
Our Price: $187.61
You Save: $79.85
Heavy Duty Receiver Hitch
This item qualifies for Free Shipping
Shipping Weight: 42 lbs
Quantity: 
In Stock
Heavy Duty Receiver Hitch 41990 - 2 Inch Hitch - Draw-Tite
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately. 1-800-940-8924 to order Draw-Tite heavy duty receiver hitch part number 41990 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2". Heavy Duty Receiver Hitch reviews from real customers.
  • All Info
  • Reviews (79)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Heavy Duty Receiver Hitch - 41990

  • 2 Inch Hitch
  • 16000 lbs GTW
  • Class V
  • Weld-On Hitch
  • No Drop
  • 1600 lbs TW
  • Draw-Tite
  • 44 Inch Wide

Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately.


Features:

  • Universal-fit trailer hitch lets you tow a trailer with your heavy-duty or commercial vehicle
    • Designed for full-size trucks with long wheel bases and heavy-duty suspensions
  • Computer-aided steel construction ensures strength and durability
  • Oversize safety-chain loops are easy to access
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Weld-on installation
    • Side brackets (sold separately) are required for installation
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Cross tube dimensions: 44" wide x 3" deep x 3" tall
  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 16,000 lbs
    • Maximum tongue weight: 1,600 lbs
    • Not for use with weight distribution systems
  • Limited lifetime warranty




Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41990 Draw-Tite Ultra Frame Service Body Receiver - Cross Tube Only - Universal - Class V - 2"

Installation Details 41990 Installation instructions


California residents: click here



Customer Reviews

Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2" - 41990

Average Customer Rating:  4.8 out of 5 stars   (79 Customer Reviews)

Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately.

by:

Bought this hitch for a custom application. WAY OVERKILL for what I needed but better to over engineer it than under. This baby is capable of towing 16000 lbs with a tongue weight of 1600 lbs. I will never tow more than the 5000 lbs my coach is rated for but I needed it to extend out and be a bit lower than the standard hitch to carry my KLR 650 on a rack which comes in at about 525 lbs.



by:

Etrailer's part of this purchase was great. Shipped quickly and well packaged. The problem was with the manufacturer ... Draw-Tite. The hitch is great except for one thing ... the stickers look like a drunk slapped them on. It may sound trivial ... but I have spent countless hours building a custom expedition vehicle I am proud of. I now have to remove them because they look like crap.


Comments
Your expedition vehicle sounds awesome! There is one sticker on the hitch that lists the towing and tongue weight capacities. If possible, I recommend leaving that sticker attached for safety reasons.
-- Etrailer Expert Victoria B - 11/22/2019

by:

Company was great with helping me find the right hitch for our church bus. We have been very pleased with the quality of the hitch! We pull a 12' loaded trailer to south Texas each year and the hitch performs great. Thanks for all your help!


Comments
Hitch is still working well! We have had no problems with it and the quality has been great!
Frank - 03/01/2019


by:

Solid hitch! Excellent customer service



by:

Just what I was looking for



by:

The product was in stock, delivered in a timely manner, and exactly as advertised. E-Trailer even upgraded the delivery at no extra charge. The hitch has a Made in Mexico sticker. The welds look good; much better than welds on most Chinese import goods. Very pleased.



by:

Product is great, shipping was as expected with a winter storm impacting it. Product arrived hanging outside the box with one end filled with mud from being dropped by the delivery man. Typical for the shippers in this area but the packaging for this heavy of an item could have been better. This is the reason for 4 and not 5 stars. Product deserves 5 stars, shipping probably 2.



by:

Excellent product, exactly what I wanted. Service for your products has been very good. It arrived sooner than expected. Thankyou



by:

Great product. But even better Sevice from etrailer as usual. Always a great buying experience.



by:

The product and shipment was just what
Etrailer
said it would be.



by:

This weld-on receiver was the perfect choice for adding a receiver to our tandem dump truck. I couldn't be happier!



by:

Very good product easy installation and prompt shipping. I highly recommend.



by:

excellent quality woul buy again fast service no problems



by:

Mitsubishi FUSO fe
Looking to install
this hitch.



by:

Easy to use and it works great!



by:



by:

excellent, fast and friendly service, I couldn't ask for more!



by:



by:

quality product



by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


This hitch is Heavy Duty!! If you're looking for a Class 5 hitch to mount on the back of a Big Rig or RV, this is it. Bolt holes help with positioning and mounting. Drop brackets are not welded in place allowing custom fit for your application. Receiver tube must be welded to drop brackets. Highly recommend this product.



by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


This is a tremendous hunk of steel, extremely well-made of high quality steel with perfect Welds. As you can see in the picture I customized this bar to fit right in the bumper. That is truly strong enough to be a bumper, Or even a crossmember to a custom vehicle. This is not a bolt up item. Be careful unless you're putting this on a large truck, The capabilities of this trailer hitch will generally far exceed that of your average vehicle. And of course etrailer is the best place to get it, good luck.



by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


Hitch came on time and was easy to install being a weld on hitch. Was a good choice for my flatbed as the truck has a frame extension on it from a service box which meant a factory type hitch was not a option. Looking forward to using it more and not having to worry about hitch failure.



by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


Great product. Welded it on an M923 military truck to be able to haul conventional trailers and with a receiver pintle hitch I can haul any military trailer, big or small.
Thanks.



by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


The website is cute enough that you can select you vehicle and year but the cuteness ends there. I assure you will be sent a hitch that won’t fit. Never used and I’ll sell it for half price but honestly I have no idea what it will fit because it sure won’t fit a 2016 Winnebago forza as described. Wish you better luck in your purchase.


Comments
This receiver is a universal-fit trailer hitch that fits heavy-duty and commercial vehicles with frames up to 44 inches. Before purchasing this product I would measure the frame of your vehicle and also measure where the 16 inch tall, weld-on mounting brackets will be going to ensure that you have the room.
-- Etrailer Expert Sierra K - 10/07/2021

by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


This hitch is exactly what is needed for hauling something that requires a receiver hitch behind a class 8 tractor. I tow my Tracker behind the tractor to take it to service unhook, go home, and return to pick up finished repair. No more double trips.


25
79
Show More Reviews

Ask the Experts about this Draw-Tite Heavy Duty Receiver Hitch



  • Width of Ultra Frame Weld On Class IV Hitch Receiver
    I called the manufacturer and part # 41990, will accommodate up to a 44 inch frame. We also have part # 41990-07 and 41990-16 which are both 44 inches wide with different size mounting brackets if these would fit your application.
    view full answer...
  • Recommended Trailer Hitch for Ford E-450 Box Truck
    I do have an option for you though there aren't custom fit hitches for box trucks. The frame is not really the issue but rather the body the up-fitter adds on which could hang down below the frame where the hitch mounts or actually use the holes in the frame for the hitch. Therefore, you will either need to drill or weld on one like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 or part # 41990-07.
    view full answer...
  • Can Draw Tite Service Body Hitch 41990 Fit Ambulance Build on 2007 Chevy Express
    For what you are trying to do a fabrictor is going to be your only option for safe install. What I would recommend is take the cross tube part # 41990 to a qualified fabricator in your area and tell him what you are looking to do and he will come up with a way to install the hitch at the exact height you are looking for.
    view full answer...
  • Hitch Tube Recommendation for Fabricating Hitch to RV
    If you are planning on having a crossmember welded to the frame of your trailer you would be best off just having the part # 41990 welded to the frame as that has the hitch opening already welded to it. Or we have the part # 41990-07 which has the hitch attached to drop brackets.
    view full answer...
  • Recommended Trailer Hitch for Shuttle Bus On Ford E-350 Chassis
    The best option I have for you to add a trailer hitch to your shuttle bus is with the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 which has the Class V rating that you are after. In regards to installation, this will be up to you as it is a universal trailer hitch and there is not a custom fit one available for your application. So long as your frame rails do not sit more than 44" apart inside to inside the Draw-Tite Ultra Frame Service Body Trailer Hitch...
    view full answer...
  • Trailer Hitch Options for 1973 Penn Versatile Step Van
    We have a couple of options that will provide you with a trailer hitch for your 1973 Penn Versatile Van, but they will need to be welded or bolted to the frame as there are not any custom fit hitches for your vehicle. For a hitch with a bit of a drop, you could use the Draw-Tite Class IV Weld-On 44 Inch Wide Ultra Frame Trailer Hitch with 7 Inch Bracket # 41990-07. This hitch is also available with 16 inch brackets, part # 41990-16. The Ultra Frame hitch is designed for service-body and...
    view full answer...
  • Size of Class IV Weld-On Hitch Receiver by Reese, Hidden-Hitch and Draw-Tite 41990
    This Class IV Weld-On Hitch is 44 1/2 inches in length, has a main tube size of 3 inch square, and is approximately 7-1/2 inch from the back of the hitch to the front of the receiver.
    view full answer...
  • Is it Possible to Install Draw Tite Hitch 41990 with Zero Drop Mounting Brackets
    With the part # 41990 we do not have any zero drop brackets to use when installing it. Due to the universal nature of this cross tube though you could pretty take it to a qualified fab shop and have them fabricate a way to mount it to your trailer in the location you want.
    view full answer...
  • What is the Towing Capacity of a Mitsubishi Fuso FE160
    Your Fuso FE160 has a tow rating and whatever that tow rating happens to be is what the capacity is no matter what the hitch is rated for. So for example if the Fuso is rated for 10,000 pounds gross trailer weight then you would be limited to that even though hitch # 41990 is rated higher. The opposite is also true; if the hitch is rated for 16,000 pounds but the vehicle is rated for 20,000 pounds you are limited to 16,000 pounds because it is the lower rated component. From what I...
    view full answer...
  • Instructions for Class V Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube
    I'm not sure why you aren't able to pull up the instructions for the Draw-Tite Trailer Hitch # 41990 because the link is working okay for me but regardless I cut and linked the instructions to photos and attached them to the page for you to check out.
    view full answer...
    Image 1 for Image 2 for
  • 2 inch Hitch for Toyota Itasca 1993 Motorhome
    The best hitch solution we have for your 1993 Itasca that has a 39 inch wide frame would be the Curt hitch part # C13702 which fits frame widths of 18 to 51 inch but does have a little more drop down to the top of the hitch opening at 2-1/2 inches. We don't have anything that has right at a 1 inch drop.
    view full answer...
  • Recommendation for a Weld-On Trailer Hitch for a Freightliner Step Van
    Your best option is either going to be going with a Curt hitch, # 15902, or going with one of the hitches with 16 inch brackets like # 41990-16. This hitch is closest to what you need. You will need to have a qualified professional welder perform the installation. I have included a link to the installation details for the Curt hitch for you.
    view full answer...
  • Where Weld On Receivers are Measured From
    The dimensions are measured from the top of the brackets to the bottom of the receiver; Draw-Tite # 41990-07 will offer 7" of drop, while Draw-Tite # 41990-16 is going to give you 16 inches of drop.
    view full answer...
  • Availability of High Capacity Weld-On Hitch for Class C Motorhome on Ford E450 Cutaway Van Chassis
    We might have a solution for you, but you'll need to do some measuring at the rear of your motorhome to see if it will work. The Draw-Tite # 41990-16 is a Class V hitch, which has a GTW capacity up to 16,000 lbs and a tongue weight capacity of up to 1600 lbs, when correctly installed exactly according to the instructions. In order to determine if this hitch would work for you, the outside to outside dimension between your frame members needs to be less than 44 inches. You'll also need...
    view full answer...
  • Recommendations For Trailer Hitch On A 1998 Ford E-450 RV Cutaway
    To find a trailer hitch that will work well on your Cutaway I recommend a weld-on trailer hitch. You will need to take a measurement to make sure you have clearance. You will need to measure the distance between the frames to make sure it is less than 44-inches. You then need to measure from the top of the frame downward to the bottom of the bumper or step bumper if that is what you have, to make sure the receiver opening clears it. If that distance is 5-9/16 inches or less, then part...
    view full answer...
  • 1993 Chevrolet P30 Trailer Hitch Option
    For an RV application the # 41990-16 is an option as this is a great multi-fit hitch typically used for service body trucks. Since we know that the P30 chassis has 34 inches between the frame rails this hitch should fit just fine since it has 16 inch drop brackets that can weld anywhere on the 44 inch wide crossbeam of the hitch. If you needed a hitch with less drop in the mounting brackets the part # 41990-07 has a bracket height of 7 inches instead.
    view full answer...
  • Hitch Recommendation for Having Hitch Fabricated to Trailer Frame
    Actually if you are planning on having a crossmember welded to the frame of your trailer you would be best off just having the part # 41990 welded to the frame as that has the hitch opening already welded to it. Or we have the part # 41990-07 which has the hitch attached to drop brackets. I can't recommend the hitch you referenced as an option though as it's not designed as a multi-fit hitch.
    view full answer...
  • Recommended Trailer Hitch Receiver for 2002 38 Foot Freightliner Bus
    With a 34 inch frame I suggest the Draw-Tite # 41990-07. It will fit frames up to 44 inches wide. It's a 2 inch, Class V hitch receiver with 7 inch brackets. If you need more drop instead use # 41990-16 which has 16 inch brackets. Both hitches require welding for installation. I recommend the work be performed by a certified experienced welder.
    view full answer...
  • Class V Trailer Hitch Receiver for a 2005 Fleetwood Tioga 29V
    In order to maximize the full tongue weight capacity of your 2005 Fleetwood Tioga 29V which is on a Ford E-450 chassis, I recommend using a Class V hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 for 16" tall brackets or part # 41990-07 for 7" tall brackets which both have a tongue weight capacity of 1,600 lbs and should be more than enough for your two dirt bikes and carrier. Either hitch would require modification in order to be bolted or welded...
    view full answer...
  • How to Choose a High-Low Adapter for a 2014 GMC Terrain
    The best way to get the tow bar level is with a high-low adapter, not a low hanging trailer hitch. This is going to improve ground clearance immensely which can be an issue on certain motorhomes. In order to determine the correct high-low adapter for your 2014 GMC Terrain you will need to measure from the ground to the center of the base plate kit on the vehicle and compare that distance to the measurement from the ground to the top of the inside edge of your trailer hitch on the motorhome....
    view full answer...
  • Possible Hitch to Fit 1995 Chevrolet P30
    Your 1995 Chevrolet P30 is the type of vehicle that the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 was intended for. This is a multi-fit hitch that comes with brackets that allow it to drop down 16 inches to clear the lower bumper of your van. As long as your frame is less than 44 inches wide this hitch could be made to fit since it's a universal design. We have a version of this with shorter drop brackets as part # 41990-07 which has 7 inches of drop instead.
    view full answer...
  • How To Upgrade the Trailer Hitch On a Class C Thor Motorhome
    In order to replace the trailer hitch on a motorhome you will need to go with a universal hitch as they do not offer bolt-on options for this. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 or part # 41990-16 which can be bolted/welded to the trailer frame rails. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver then has a 16,000 lb weight capacity so it will be plenty for your horse trailer.
    view full answer...
  • Recommended Trailer Hitch Receiver For 2003 Winnebago Ultimate Advantage Motorhome
    Since there is not a custom fit trailer hitch receiver available for our 2003 Winnebago Ultimate Advantage built on the Spartan Chassis I recommend having a local fabricator install the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07 or # 41990-16 depending on the distance between the frame rails and the bottom of your rear bumper. The # 41990-07 has 7" tall mounting brackets where the # 41990-16 has 16" tall mounting brackets. These hitches...
    view full answer...
  • Determining Which Universal Trailer Hitch receiver Fits A 2001 VanHool C2045 Bus Converted To An RV
    The correct trailer hitch receiver for your 2001 VanHool C2045 bus to RV conversion is going to be dependent on the width of the frame and how far below the frame the rear bumper is. The # 41990-07 you were looking at has 7" tall mounting brackets, so as long as the bumper does not hang down farther than 7" this would work perfectly. If you need a hitch with taller mounting brackets then I recommend the # 41990-16 which has 16" wide mounting brackets. Both of these hitches will fit frames...
    view full answer...


< Previous
123. . .17



Do you have a question about this Heavy Duty Receiver Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality heavy duty receiver hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate heavy duty receiver hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Kathleen M
Installed by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.