Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 11.41" compressed, 20" extended, and has 150 lbs of force.
Features:
Specs:
When replacing gas shock on your vehicle or RV, you will want to make sure you are buying a replacement with the exact same extended length, compressed length, and pounds of force. This information is usually printed on the shock. Lengths are measured from the center of the ball joint used for mounting. If you are planning on installing gas shocks on something for the first time, identifying the shock you need requires fairly complex initial calculations, so be sure to do your research to avoid purchasing a shock that will not fit your application.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this JR Products 20" long gas shock. Now this is a nice, quick and easy replacement for any worn or broken gas shock that you might have. This will replace a gas shock on multiple applications, like on your RV or trailer doors, storage compartment doors, truck bed covers, or even fold down camper beds. This shock is designed with a nice high quality black nitride shaft and includes the plastic ends on each end with the locking clips to secure it to the mounting ball.
This is designed to connect to a 10mm size mounting ball, and it installs easily in minutes, no special tools required. Wanted to zoom in just to show you the ends. You can see there's where the ball sock will slip onto the ball. And on top is this clip.The way you install it, what you'll do is take a little small tip screwdriver, slide it under this clip, and then just pry that clip up. You don't have to remove the clip all the way, just pry it up enough to relieve the pressure, and then install that over your 10mm ball.
Once it's over the ball, then just push that clip all the way back down. It'll clip into place, and it secures that end to the ball. And you'll do the same on the other end. It's the same way. Now, when you do install this, you do want the inner rod right here facing down, and it's also recommended to replace these gas shocks in pairs.
Now the extended length, which would be measured from the center of this ball hole to the center of this one, on this one center to center is right at 20". The compressed length, if it's all the way compressed would be 11.41". And the output force on the shock is 150 pounds. But that should do it for the review on the JR Products 20" long gas shock.
Average Customer Rating: 4.7 out of 5 stars (351 Customer Reviews)
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 11.41" compressed, 20" extended, and has 150 lbs of force.Product is installed but instructions were a bit vague and difficult to implement(related to the removal of previous gas shock bar).
Excellent product, easy to install, and timely shipping
Good quality product. Have been totally satisfied with every purchase I made from you.keep it up.
It was just what l needed to hold up bed storage work great
Great staff and knowledgeable about evey product I’ve purchased
The part I ordered arrived quickly. Packaging was excellent. I have not installed the part yet, but I believe it will perform as expected.
It's the correct size and shape, but it will not collapse. I emailed earlier and got no response.
I was able to use one of these 150lb shocks to replace two 60lb shocks on my motorhome bay doors.
Very helpful and professional.
They came on time as stated. The product look good but I haven't had time to install them yet.
The shocks arrived quickly and are very good quality
Jerry
4/5/2023
Still going strong!
Bought this as a replacement for our boat's engine compartment lid. Before it was difficult to lift, now it is much easier. This was an exact fit and easy to install.
Product shipped in a timely manner and works just great! Would recommend etrailer and would use them again.
Accurate description & fast delivery
Just as described.
Great shocks. Just as i expected.
The Stabilus shock holding the 22" door of our bumper pull trailer open was weak. Mild wind would push it shut. This shock fit right onto the existing ball joints. A small blade screwdriver pried the "c" clip back, allowing me to slip the socket over the ball, and the clip snapped into place. Maybe 30 seconds and the shock was installed.
The biggest challenge was determining what force I needed in the replacement. The existing shock had the model information scraped away where it rubbed on the door threshold. No where could I find on the etrailer site what force a small door shock should be. I ended up chatting with an RV service tech I know, who looked it up in his parts catalog. Turns out 10 lb force is standard except for large RV doors. I would suggest etrailer.com add this information on their online catalog. Maybe it's there and I couldn’t' find it? "Gas shock force needed for RV doors."
Do you have a question about this RV Door Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brucet
6/2/2023
Working great after a year of operation! Easy installation!