Arrives before Christmas 
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the 90 degree black mounting bracket for the 5 and 1/4 inch long rectangular 12 LED strobe lights. This is a black aluminum construction and it is for use with the 5 and 1/4 inch long 12 LED surface mount strobe lights. Gives you the vertical mounting position either this way or that way. Comes with the mountain hardware to install it. It is a 90 degree design.Few measurements on this, the overall length is going to be right at 5 and 1/4 inches long. Height on it is right at 2 and 1/8 inches tall.
And the total depth on it is right at 1 and 1/4 inches deep.Now I happened to pull one of the 5 and 1/4 inch long 12 LED surface mount strobe lights. This is one of those here. And you can see what you end up doing is you just take your wires, run it through the hole in the middle right there. And inaudible 00:00:55 pull right up against there and then you bolt your light right to the bracket so you can mount it this way or, as I mentioned, also that way.But that should do it for the review on the 90 degree black mounting bracket for the 5 and 1/4 inch long rectangular 12 LED strobe lights.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.