Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mounting panel creates a factory look for your Toyota or Mitsubishi's dash when you install the control knob from your Tow-Pro Elite or Liberty brake controller. Drilling template and self-adhesive tape included.
Features:
California residents: click here
I am so pleased with etrailer's products. I have ordered from them before and received the perfect part to my vehicle. This time I ordered a Plug and Play Tow-Pro Trailer Brake Controller with a Control Knob mounting plate that fits perfectly with my install. Very professional. The parts came in as was promised. Very happy with the service and the products! Thank you ETrailer!
Fits great, super easy install in a GX4 60
Victoria H.
2/26/2025
That looks perfect, and I'm happy to hear install went smoothly for you Corey! What are you hauling?
This mounting panel for my RedArc controller worked great on my 2022 Tacoma OR . I did have to trim a bit of plastic to make it fit . No big deal .
Button Was Printed Upside Down.
See the picture. This is the only way it fit
Heather A.
10/17/2024
Hey J, I reached out to Redarc and the panel is reversible as needed. If you pop off the button panel by pressing on the two clips to release the switch insert it can be turned 180 degrees to the correct orientation. Then it can be pushed back into place again.
The Redarc Pro Liberty Brake Controller came with both types of mounting panels. So I have two extras of each type. Wish the description of the Brake Controller told us that. Both mounting panels work great and are an exact fit for my 2021 Tacoma.
This part fit my 2022 4 Runner just fine but I didn't realize that the Brake Controller kit came with one already so I didn't end up needing it.
Haven't installed it yet, but looking at the etrailer installation video, it should be an easy install. Great help from Andrew in customer service to make sure I ordered what I needed
Gwendolyn Y.
1/27/2025
Hey James, I wanted to check in to see if you were able to get the panel installed and how it went.
Awesome, did exactly what it was supposed to do. Fit perfectly in the switch panel of my Tundra, looks like it came from the factory that way. No drilling. no filing.
So far everything is working fine wirering and red ark braking system easy DIY video installation from etrailer looking forward to next season.
Watched your video and finally figured out the correct side of steering column, the video didn’t say and it went pretty well from there. There’s no way to get comfortable. It’s working perfectly. Thanks. Ron
Fits perfectly, looks good. 2022 Toyota Tacoma SR5.
etrailer.com is the best online retailer I have dealt with. They have the best products. And when you order from them, they keep you informed each step of the way - from receiving your order, to packaging, to shipping, to delivery. Awesome company. Highly recommended.
Gwendolyn Y.
1/14/2025
Hey Roger. Thanks for relying on us for your towing needs! See you on your next adventure!
Was an easy plug and play looks like a factory installation and took less than an hour
Fits the dash okay but is a different shade of black. 2022 Tacoma. Asked by email if the bezel comes with it. Was told no so I bought the kit and a bezel. Find out it DOES come so, $[XX] wasted but wont break me. HAvent had a chance to try the unit out yet.
The switch plate fit perfectly, the installation looks factory.
This mounting plate along with the Redarc brake controller make for a perfect install in my truck. Any other controller would have likely been in my way and/or in a horrible place in my interior. Very happy with this solution.
I am very careful with anything for my Taco. I had to install a brake controller to tow a double axle trailer with electric brakes. The Redarc Elite was not only easy to install it exceeded my expectations in its operation. Above all the control switch for it looks as good as a factory install. Nice job.
Jimmy C.
6/4/2019
Operates as designed.
Perfect fit in our 2020 Toyota 4Runner. Saved me from drilling out an exiting switch blank, so if I were ever to remove the controller to sell the truck it could easily be returned to stock.
Oddly, the trim bezel that comes with the TowPro Elite to go behind the control knob won't fit properly, as the knob can't be depressed when it's in place. No matter, as it's not needed anyway and looks fine without it.
Brian
4/17/2022
Still pleased with how this switch fits and integrates into our 4Runners instrument panel. I wasnt certain that using the far left side blank would prove convenient rather than the partially hidden one to the right of the steering column thats closer to hand, but it has proven to be a good, readily accessible place for the control knob. Also loving the RedArc TP Elite controller. Strongly recommend it. Note that while the application list shows 2009-2012 4Runner for this mounting panel, it fits perfectly in our 2020, and should therefore fit MY2010-2022 models, since they use the same switches and blanks.
Perfect fit on my 2023 Tacoma. Pop out the factory blank, pop this in, slide the control know through and gently tighten the nut. Works like a charm and looks almost factory.
Fits perfectly in the 2023 tacoma upper row on the left of the steering wheel.
Josh
7/22/2024
Still looks as good as the day I installed it.
Very happy mounting panel. Looks factory equipment in my 2019 4Runner. Or at least it will when I white out the letters like another reviewer did.
Albert G.
6/11/2022
Shortly after I wrote this review I used liquid white out to fill in the letters. Looks like it came from the factory.
Looks great and fits great on my 2017 Toyota Highlander.
I wanted to follow up and thank you for your help! I was able to install the Redarc brake controller with no problem! Thanks for your assistance and recommendations.
One note...There are not a lot of late model Land Cruisers on the road. Toyota only sells about 3-4,000 a year so finding videos and guides for installation is a bit of a challenge. I found some FAQ's on etrailer.com but the information seemed inaccurate or at least not very helpful.
I know the LC comes with a two package and is prewired but it takes some doing to locate it. I remember directions and I found some install help on another site and that helped.
In any event, I appreciate your help. I have attached a photo of the installed Redarc!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
4/8/2025
It looks like it was meant to be there, Jon! What are you going to be hauling?