Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.
Features:
Specs:
This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break. It's designed to work with a matching EZ Connector plug (sold separately) to create a secure, watertight connection that lasts. Strong magnets in both the plug and the socket keep the connection tight and secure, even when you're driving on rough terrain. Built-in O-rings on the dummy plug create a seal to keep out water and debris while the connector is not in use. And spring-loaded, face-to-face electrical contacts are long-lasting and easy to clean. These factors combine for a strong, durable connection that's easy to use and to maintain.
The EZ Connector system uses magnets inside the plug and socket to hold the connectors together. Simply insert the trailer-end plug (sold separately) into this vehicle-end socket and the internal magnets will snap them together, no latch needed. To disconnect, just pull the plug out by hand.
This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard 7-way plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid, the electrical terminals are exposed to damaging moisture and debris. But if you forget to remove the EZ Connector plug when unhooking your trailer, the plug will simply disconnect from the receptacle as you drive off.
The magnet inside of this trailer connector is made of neodymium, an extra-strong, rare-earth alloy. This high-quality magnet ensures a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration.
The EZ Connector trailer-end plug (sold separately) has a double O-ring that will create a seal when it's inserted into this connector. When the socket is not in use, just insert the included dummy plug, which also has a double O-ring, into the connector. This ensures that the terminals on this vehicle-end socket stay protected from moisture and debris at all times.
All of the EZ Connector systems have earned a perfect score on the SAE water submersion test. This means that the seal created on this connector, either with the dummy plug or with the EZ Connector trailer-end plug, will stay watertight, even if the connector is completely submerged in water for extended periods of time.
This EZ Connector socket has spring-loaded, face-to-face electrical contacts instead of pins or blades. Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug (sold separately) that can trap debris. And if any dirt or debris does collect on the terminals of either end of an EZ Connector setup, it can be quickly and easily wiped away. No more scraping pins to get grime off. The result of all of this is a quality, effective connection every time you plug in.
Average Customer Rating: 4.6 out of 5 stars (15 Customer Reviews)
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.
After having it over a year, I still love it. I have had a couple of issues with the pins but EZ connector fixed that. Would definitely recommend.
This is a great way to add the quick connect to your Ford! The connectors fit like they should and it was literally a matter of unplugging and plugging.
The hardest part was mounting. I chose to drill my bumper rather than use the included bracket.
I'd recommend this, and the quick connects are much more reliable, in my opinion, then the sometimes wonky 7-pin.
Troubleshooting any light issues is so easy now. Because I know the connection at the plug is good.
Works great on my 2019 Tiffin Allegro bus. Allowed to keep standard 7 pin con ector and add ez connector plug.
Thanks!
This is the cats meow. Has worked flawlessly and was a straight forward install with good instructions.
I don't ever want to use a traditional connector again.
I think y'all are Great! ... And the product is pretty good too.
Install of the cables and connections was very straight forward and easy. It does take laying down and working overhead which can be difficult for some. Took about 1 1/2 hours. WELL WORTH IT! This is the best electrical connection you can have! Water proof and stays in place. I also bought the four way adapter for my boat. Best add on you can get for any RV. Would buy again if needed but will outlast any RV.
I was tired of having connection problems with the standard 7 prong trailer plugs, I did not like the fact that I could not count on my trailer brakes 100% of the time to help me stop or slow down in an emergency. After doing some research I found that people were having good luck with these EZ Connectors. I was working on my standard plugs all of the time. I know that rough dirt roads and driving over roads treated with magnesium chloride did not help with my connection issues, but I finally had enough and purchased what I believe is the best trailer connector made, The EZ Connector is completely sealed and the contacts are under constant pressure when in use, It also came with magnetic caps for both ends to keep the socket clean when I am not pulling. It is made in the USA so that makes me happy as well. I am very pleased with this product, and the service I received from etrailer was Top Notch.
Absolute plug and play for my 2015 silverado. Not on "trailer disconnected " message on the dash since. Should have installed long before I did.
I removed one star because the package arrived in a box with the product name and pictures fully displayed on the box outside, with no tape or seal. The box top had two tuck in flaps and no security. As for the product itself, it appears well designed and was very easy to install, once you figure out how to disconnect the OEM connector. The eTrailer video was very helpful in that regard. However, the video does not make it clear that the short bracket is an extra purchase and does not come with the connector. As a result, I have not yet completed the installation. The design concept is outstanding, nevertheless.
Great connector. Fast shipping. My 5th wheel will always have brakes now.
This 7 way pin connector is heavy duty and well made.
I Will be sending it back it did not fit my TRUCK????????
Katrina B.
11/22/2022
I am sorry to hear that you are having difficulty with this harness. I do see that this item may require additional components in order to operate. I see that this is also intended to be used with the part # 319-R7-07 trailer side plug. I have sent this information over to our customer service department for them to get in touch with you in hopes to get this corrected.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Charlie B.
2/11/2021
Not one problem. It still works like new!