bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Draw-Tite

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

In Stock
$210.35
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
Draw-Tite Trailer Hitch - 24935
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24935 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (27)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Installation instructions included
    • Uses existing hardware from your vehicle
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24935 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe - 1-1/4"

60373 Hidden Hitch Class 1 Trailer Hitch Receiver

Replaces 24917

Item # 24935

Installation Details 24935 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24935

Average Customer Rating:  4.7 out of 5 stars   (27 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Good price and fast shipping as always, this is the 3rd trailer hitch I have bought from here. The only thing I would like people to know is that on a stock 86 you will have to cut a slot in the bumper a little or just fold it over the hitch receiver. Since I have a TRD I will have to notch out the additional add on piece on the bumper as well. Not a big deal at all since I was worried about the ground clearance on this relatively lower car but after driving it around with the bike stand I am happy to report that I can clear all the bumps, and speed breaker and driveways I usually drive on without driving at an angle. Really like that the hitch is high enough off the ground. I am more of a practical guy over aesthetics hate cars that have ground clearance issues or wheel rub just to look cool lol. The install part is easy as it gets once you have the bumper off. Would highly recommend to anyone!



by:

The item arrived fairly quickly and packaged well enough. The instructions for removing the rear bumper cover were adequate but could be improved. Better photos locating the retaining tabs would have been helpful. The hitch itself mounted easily. There is a slight fit up issue when putting the bumper cover back in place. There is a minor interference issue. Over all, I am very satisfied with the hitch and its use in holding a bicycle carrier .

Chris H.

4/23/2021

Working Great



by:

Great product. Hidden enough that you barely notice it if you put a cover on the receiver. Have been using it on my FRS for bicycle racks and pulling a small trailer to tow my motorcycles. Used to own a small truck and now own this small car so this has been a good alternative for towing small stuff.



by:
2015 Subaru BRZ

Shipment was well packaged and secure.Install went on without a problem. Easy bolt on installation on 2015 Subaru BRZ. Highly recommended.

Irving A.

3/29/2018

Still Great After A Year. Ive seen plenty of inelegant solutions for attaching a bike rack or hitch receiver to the BRZ but this is far the best Ive found and at a really great price. It helps transport mountain bikes in my BRZ with a hitch bike rack. Because of the design I dont think I can add an aftermarket rear diffuser without modifications to the diffuser but otherwise I see to issues. Aftermarket Catback exhausts should not be an issue at all either.



by:
2017 Subaru BRZ

Fits perfectly and works incredibly well for bike rack use, which is what I use it for mostly. Installation was a breeze. Trailering is no problem either, just don’t overload!



by:
Scion FR-S

Purchases hitch mount for my Scion FRS.Was delivered within four days. Came with detailed instructions. Was well-made and fit the car perfectly.



by:

I have a little sports car ( Scion FRS) and I installed the Bike Wing (holds 2 bikes) trailer hitch and I love it! Hitch doesn't show,easy to attach rack to hitch, and easy to secure bikes Couldn't be happier

Jerry S.

7/9/2020

Perfectly



by:
2016 Subaru BRZ

This has been a great product after a year of use. I use it 2-3 times a week in the summer and it does exactly what I need it to do. I get some looks driving down the street with a trailer hitch and bike rack on my Subaru BRZ, but it's awesome.



by:
Toyota

Excellent trailer hitch with easy installation. I had to make a small cut in the bottom of the bumper to get it to fit on my 2017 toyota 86 but it still looks great.
I have used my bike rack on the hitch many times and have had no issues.



by:
2019 Toyota 86

Great fit for the 2019 Toyota 86. A bit of a pain in the butt to install. Definitely recommend cutting a bit of a slot in the plastic bumper where the hitch sticks out. I didn't and it folds up a bit. To get the bumper off, the 2 plastic rivets in the wheel wells, use a small screwdriver or something like a coat hander and push the middle of the rivet in then pull the whole thing out. The rest of the rivets are easy to remove using a flathead. I had to pull on the bumper a bit harder than I really wanted for it to come off. Putting it back on wasn't too bad. The product itself is solid, no complaints.



by:

Awsome trailer hitch used it for my bike rack for a good year gave me zero issues super easy to install, installed it in my drive way with a few hand tools.



by:
2015 Scion FR-S

It does very well it pulls my 5 x 8 heavy duty 600LB utility trailer with no problem. I will say the rattle sounds are pretty loud but that’s mainly because of how the car is built and it’s a old trailer but it really dont bother me either way. it was easy to install, no hassle except for those “pesky plastic push pins” that are in the bottom of the bumper. took me about an hour to install.



by:

You need a deep socket wrench for whatever size is on the car. Sorry it's been over a year. You really do need that deep socket in order to torque the bumper bolts down enough. The hitch is high enough I don't worry about scraping it on valleys in the road.



by:
2018 Subaru BRZ

This is a great trailer hitch, it's stealthy and easy to install. It seems very stable, with a Kuat rack (pretty heavy) and two bikes. Also, it fit perfectly on my brand new 2018 BRZ.



by:

I choose this hitch as it's the not very visible and doesn't require any drilling or filing of the car.

So long as you have some wrenching experience this is a relatively pain free install. If you have the dealer installed splash guards you may need to remove the rear wheels to get access to the screws to remove them.

Installation took approximately an hour and the instructions are very well written.



by:

'17 brz. fits perfectly, super low profile, barely noticeable.

Remember to pull any diffusers off the bumper before trying to reattach it!



by:
2016 Subaru BRZ

Shipping was fast, and the installation was easy. The instructions that came with it were very thorough. Thanks etrailer!



by:

Quick and Easy install and perfect fit with the OEM Bumper. Most I've pulled is 800 LBS but not a single issue. Extremely confident in this product. Would buy again.



by:

Fairly easy to install and has enabled me to bring my bike on amazing rides.



by:

easy to follow step by step instructions. works as it should



by:
2016 Toyota Highlander

Great quality products and great customer service. I have bought from etrailer before and will again.



by:

The part immediately went back order and took over a month to come in. Your company stayed in contact. I appreciate that.



by:

It fit my 17' BRZ with no alterations, works as intended.



by:

Pain in the {a**} to put on



by:

Perfect fit and looks great!


25
27
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Curt or Draw Tite Trailer Hitch for 2013 Scion FR-S
    For your 2013 Scion FR-S I would recommend the Draw Tite part # 24935 over the Curt hitch # C11379 as only the hitch opening hangs below the rear bumper which gives you a more hidden look while also helping with ground clearance.
    view full answer...
  • Recommended Trailer Hitch Receiver For Carrying a Bike Rack With a 2013 Subaru BRZ
    Since the Curt Trailer Hitch Receiver # C11379 does require Stabilizing Straps # 18050 you will want to use the Draw-Tite Sportframe Trailer Hitch Receiver # 24935. This is a class I receiver that will give you a 1-1/4 in receiver on your 2013 Subaru BRZ. The Kuat Sherpa 2.0 Bike Rack # SH12B is one of our easiest bike racks to use. Its lightweight aluminum construction allows you to carry 2 bikes up to 40lbs each and only weighs 32lbs itself. You may need the T-One Vehicle Wiring Harness...
    view full answer...
  • Installation of Draw-Tite 24935 on 2020 Subaru BRZ
    To install the Draw-Tite # 24935 on a 2020 Subaru BRZ, the rear bumper cover and bumper beam must indeed be temporarily removed so the hitch can be sandwiched between the beam and the structure of the chassis. The print I provided from the linked installation instructions should give you an idea of how the hitch fits on the vehicle.
    view full answer...
    Image 1 for
  • Does Rear Panel Need To Be Removed To Install Draw-Tite Hitch 24935 On 2019 Subaru BRZ
    The Draw-Tite Sportframe Trailer Hitch Receiver part # 24935 does install between the the bumper cover and the bumper so the rear fascia does not need to be removed because it is a concealed cross tube hitch. The only part of the hitch that is visible once installed is the receiver. The bumper cover will be replaced after the hitch is installed. I have attached a snip from the installation instructions that explains this step.
    view full answer...
    Image 1 for
  • Will Thule T2 Pro XTR Bike Rack Fit Draw-Tite Class I Trailer Hitch
    The Thule T2 Pro XTR 2 Bike Platform Rack # TH23JV referenced in your question will work great with the Draw-Tite Sportframe Trailer Hitch Receiver # 24935 on your vehicle. I went out to our warehouse to take a look at the Draw-Tite Hitch and measured a distance of right at around 2 inches from the center of the hitch pin hole to the safety tab that you mentioned. The Thule T2 Pro is a great bike rack that will secure 2 bikes with a total weight of up to 100 pounds. Its ratcheting hooks...
    view full answer...
  • Will Bumper Cover of 2019 Subaru BRZ Need to be Removed to Install Draw-Tite 24935 Hitch
    According to the linked installation instructions, in order to install the # 24935 on your vehicle the rear bumper cover needs to be temporarily removed. After the bumper cover is taken off, the rear bumper beam is removed. The hitch is then installed so that it's sandwiched in between the bumper beam and the body of the vehicle. Once the fasteners are reinstalled and torqued according to the values listed in the instructions, the bumper cover is reinstalled. I've linked the installation...
    view full answer...
  • Will Bumper Need to be Modified on the Draw-Tite Trailer Hitch Receiver for a 2017 Subaru BRZ
    The design of the Draw-Tite Trailer Hitch Receiver, # 24935, will allow to install the hitch without cutting or modifying the bumper or body in anyway. The attached instructions will explain the installation procedures for this hitch. As for the suspension or brake upgrades, unless the suspension dropped the OEM ground clearance, you will have no issues with this hitch. If the ground clearance has dropped then there may be an issues with the hitch receiver dragging when entering driveways...
    view full answer...
  • Weight and Overall Dimensions of Draw-Tite Trailer Hitch 24935 for a 2017 Toyota 86
    Draw-Tite Sportframe Trailer Hitch # 24935 for your super-sweet 2017 Toyota 86 weighs 25 pounds. Overall it is 39-7/8 inches across, 13-1/4 inches tall, and 6-1/4 inches deep. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. I have linked the Class I compatible 2-bike racks and cargo carriers...
    view full answer...
    Image 1 for
  • Does Rear Panel of 2017 Subaru BRZ Come off To Install Draw Tite Hitch
    Yes, to install the Draw Tite hitch part # 24935 that you referenced the rear panel does have to come off. In the instructions link that I attached this entire process is covered. For trailer wiring you then would want the part # 118629 which is a confirmed fit for your 2017 Subaru BRZ and would work well.
    view full answer...
    Image 1 for
  • Is Draw Tite Hitch for 2013 Scion FR-S All thats Needed to Install Bike Rack
    The Draw Tite hitch part # 24935 is a confirmed fit for your 2013 Scion FR-S and would be all you'd need to install a hitch mounted bike rack like the Hollywood Racks Trail Rider # HR200Z. This would cost you about 1 shop hour if you took it to a shop so you'd just have to inquire around at shop hour rates to get idea what install would cost.
    view full answer...
  • Hitch, Ball Mount and Wiring for 2017 Toyota 86 for Towing and Cargo Carrier
    Draw-Tite Class I hitch # 24935 is a confirmed fit for your 2017 Toyota 86 and with it you can use ball mount # 3593. Add either 1-7/8-inch hitch ball # 19256 or 2-inch ball # 19258 depending on the coupler size on the trailer. Curt wiring kit # C56212 is a fit but instead I recommend the Tekonsha harness # 118629 because we have found their wiring products to be more reliable. An article to help you with the install is linked. For a cargo carrier I recommend the Curt # C18110 instead...
    view full answer...
  • Will the Draw-Tite # 24935 be Good for Towing a Small Trailer with a 2015 Scion FR-S
    The Draw-Tite # 24935 is a confirmed fit for your 2015 Scion FR-S and has a tongue weight rating of 200 lbs and a gross towing weight of 2,000 lbs so the hitch itself would be able to handle a small trailer like the Malone MicroSport # MPG461G2. To complete a towing setup for your Scion FR-S you would need wiring like the Tekonsha T-One # 118629, a ball mount like the Draw-Tite # 3593, and a hitch ball like the 1-7/8" # 19256 or 2" # 19258. You will want to reference the linked ball mount...
    view full answer...
  • Does Installation of Trailer Hitch on 2017 Toyota 86 Require Removing Bumper and Exhaust
    The installation of the Draw-Tite Trailer Hitch Receiver # 24935 does require you to remove the bumper cover but it does not require you to remove or have any type of contact with the exhaust. In regards to installers, we are not affiliated with any, but you should be able to find a local mechanic or possibly utilize a mobile mechanic to get the hitch installed with relative ease. I have added a link to the installation instructions for you to check out of the Draw-Tite Sportframe Trailer...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Alexander C
Written by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Hannah L
Updated by:
Hannah L
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.