Arrives before Christmas 
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 3-3/8" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.
Features:
Specs:
Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.
Riveted brake pads will always give you a screeching reminder to replace your brake shoes. That's because the rivets will scrape against your drum as the friction material wears down. You won't have that noisy problem with bonded brake pads. You'll also get a little more friction pad contact because there aren't any cutouts for rivets. And more friction means more stopping power.
These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time. Brakes without these tapers are more likely to create a jarring braking experience that could cause the brakes to stutter and lock up.
With standard electric brake assemblies, you need to manually adjust them every now and then to make sure you're getting the shortest stopping distance every time you tow.
With self-adjusting brakes, though, you'll always have peak stopping power - simple as that! As the brake pads wear over time, a tensioning cable will automatically keep the pads in alignment so they'll consistently make contact with your drum when you brake. You won't have to do tedious manual adjustments anymore.
Dexter invests a lot of resources to ensure that these brakes meet the requirements for certification set by the Canadian Standards Association (CSA). Basically, a CSA certification tells you that these trailer brakes are well built and safe for use on the road.
Once you get these brakes installed, you'll need to break them in. First, find a long stretch of road or a big, empty parking lot. Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.
Average Customer Rating: 4.8 out of 5 stars (28 Customer Reviews)
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 3-3/8" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.Exact fit for Dexter d1012 axle. Thank you etrailer for your research in knowing what I needed!
Items arrived early and in good condition and was exactly what I needed
Product was exactly what I needed and arrived on time
My name is Albert, I recently ordered a set of electronic brakes for my trailer(2 10,000 lbs axles). The product and service was outstanding. Greg was the representative I dealt with he was very patient, helpful and supportive as this process was new to me. As a result of such helpful service the next few days I ordered all new bearings and seals for my axles. I consider the company great to work with in getting you what you need and getting it right the first time
Etrailer was very easy to work with. I changed my order and then changed it back and staff was friendly and helpful everytime I called. Packages were on back order and I was notified of how long and product was here right when they said it would be.
Customer service is always spot on! Be aware that this kit does not come with new hardware (bolts & nuts) and it does not come with a backer plate. Make sure you save the old stuff.
Very responsive and great service.
great service, fast shipping... thank y ou!!
Quinn was Awsome,I had an situation,many thing had to come together,he pulled it off for me,great addition to the etrailer team,thanks again
Fast shipping and great customer service will definitely be ordering my parts through them from now on
Didn’t install product yet but e trailer delivered complete trailer order 1 day early and it’s complete will install tomorrow. Thanks e trailer and staff great job
Perfect fit
AWESOME customer service and fast delivery of products!! Thank you! Will be doing business with you again!!!
exactly what i was looking for came on time
Received early. Thanks
Arrived faster than what they said. Great service
Perfect fit
Extremely pleased’n
Do you have a question about this Trailer Brake?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.