Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Innovative swivel head and solid stainless steel construction make this flush-design hitch lock a great choice for securing your ball mount, bike rack or cargo carrier to your 2" hitch receiver.
Features:
Specs:
Note: This lock will not work with some factory 2" trailer hitches that have an outside width wider than 2-3/4". If a longer pin length is needed, see hitch lock 1469DAT.
Average Customer Rating: 4.7 out of 5 stars (477 Customer Reviews)
Innovative swivel head and solid stainless steel construction make this flush-design hitch lock a great choice for securing your ball mount, bike rack or cargo carrier to your 2" hitch receiver.It's easy to lock and unlock, but since I'm only using it with 1 vehicle, I'll probably just leave it attached. Even with the dust cover, I figured it was a good idea to squirt lubricant into the keyhole. Along with the ball-hitch lock I got from etrailer (also excellent) it provides peace of mind.
About 6 months after owning it, the lock is completely froze up. Can't cut the darn thing off without cutting my safety chain hook up off either
Would’ve been a great little lock had it actually fit in the housing. Too short for mine. Turns out my housing is 3”, not 2”. My bad. Paid $25 for it, etrailer wants $17 for return shipping fee? Pretty lame. So buyer beware, measure your housing first!
Quality product and works good at keeping my hitch secure.
Really good and cool looking hitch lock, service from trailer is always excellent, have purchased several products for my vehicles there, always great quality and superb costumer service..
Solid gear. Well constructed. Easy & convenient security for hitch cover / ball assembly. Look forward to many years of reliable use.
Exactly what I needed for my 2014 Jeep Wrangler! Fits perfectly and does not interfere with the light connector.
I really like this receiver lock and have 3 of this model in total. The machined finish of the lock bar and the locking mechanism with dust cap are well made. The blue (and red on my other hitch lock) accent color is a nice touch.
Works as advertised. I have a Tesla Y and this is the only one that will fit it the small space provided.
This hitch is very well made and very heavy. very good product
Great alternative for a trailer hitch lock for my 2016 Yukon because of GM's lack of spacing between receiver and seven pin plug to use my lock that had key entering from the horizontal direction.
Philip
3/12/2017
Worked fine. thx
Works flawlessly
Love the product, the service and the very personal touch from etrailer.com! Great to deal with and an overall great experience so far! The lock was for my hitch extender which is also perfect?
Chris E.
9/10/2017
It continues to work very well
Easy to use, works as advertised. I use this to lock my bike rack onto my Subaru Crosstrek and its easy to lock and unlock.
Elaine
10/31/2021
Still clicking along after a year of use. No issues.
Works great, no issues. This lock makes it easy to access the keyhole. Our previous straight lock took two people and some tricky hand positions to get the key inserted, because of the tight spacing around the hitch reciever and electrical trailer connector on the back of our Audi Q7. I'd recommend this to anyone with a cramped setup around their hitch.
I like the fact that I now only need to carry 1 key set to open two of these locks; but it's a little short to use on my 2014 Toyota Tacoma -- is just won't lock because the shank is about 2-3mm shorter than what I need. Now I have an extra 2" hitch lock that I can't use for what I purchased it for.
Heather A.
7/12/2018
This lock will not work with some factory 2 trailer hitches that have an outside width wider than 2-3/4. Toyota OEM trailer hitches have that extra piece on the outside of the hitch and they require a different, longer locking hitch pin such part #1469DAT.
Helpful Links
Great product! Solid and sturdy construction, exactly as described. Also, fast processing and shipping! Great company with great products.
It just plain works, however due to the right angle locking design it is a little awkward to get the lock head on while you are holding the key in the spinning lock head and at the same time holding the pin in with you other hand as you put pressure on the pin while you are pushing on the locking head AND turning the key while the lock hesd wants to spin...mine will not press on and lock without the key in and turned..3 handed monkey operation
Well as a truck camper owner the big, big thing is always getting up into the rig.
These steps are highly talked of online. I like them and knew they would solve my entering problem.
They did....but they are very awkward and bulky to travel with....
I actually think they should make them break down for tvavel...
etrailer.com.....seemed to work hard to ship my order fast and etrailer seems to be very willing to work hard at reasonable prices...
.So, I must try to help etrailer on this one honest mistake.....
When my order shipped, etrailer combined my two items..one BIG BuLKY. Awkwad set of steps.....with my hitch-lock that goes in it....
Well the awkward steel steps ripped and gashed the cardboard box in about 3 or 4 areas. There was no packing foam or bunched news paper...
This poor master hitch lock hadn't a chance.....it rattled around on the steps and got bashed out of its little box......and out of its internal bag....and its little set of keys likely went bye bye out one of 4 big box gashes.....
So, now I need to... somehow get new keys to this lock...it is useless as is.....
If etrailer can send keys the key number is on the box as : 1480 KA. Key:0501.
If etrailer sends me a working hitch-lock with keys... my problem is solved...
Aside of this unfortunate happening, I am happy with the price and quality and service that eTrailer has delivered...I just need this one little issue fixed to give etrailer 5 Stars.!
Thank You for your concern
Chas Youngs
Poughkeepsie, NY
Excellent hitch lock for a 2" receiver!!
Steve P.
1/27/2018
Still working great one year later!!
In addition to the hitch and bike rack, a Kuat, I purchased this extremely sturdy lock. It’s thicker than the one which came with the rack, but still has no problem being threaded through the hitch and rack, and adds stability, besides security.
Master lock has done an excellent job on the design and function of this hitch lock. After doing a number of research on varies types and models, this was the top choice. Right now I'm just using it for my hitch cover. I don't want my cover getting legs and walk away. It fits perfectly on my 2012 Dodge Durango Crew factory 2" hitch receiver. The next best thing about this Lock. I brought it from you guys (Etrailer). The price was right and shipping was fast. From here on out I will only buy all of my hitch and roof rack assessories from etrailer. Great job guys and keep the great work.
Great service from e-trailer. These people are on top of things.
The front hitch was easily installed with no more than a socket set. The 9" hitch is too short to get past the bumper if you plan to have the ball at bumper height like I needed. Even the 11" hitch was too tight, so I got a 12" extender, inserted my regular hitch, and it came out fine. No one even notices it when the receiver is not in use.
I use these to lock up my Roadmaster tow brackets (2 of them) on my Jeep Wrangler and my Falcon 2 tow bars on my Class C (3 locks total all keyed alike) and they work great. Nice to have them all keyed alike and to know that everything is locked up nice and secure.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Katrina D.
3/22/2024
That is not good to hear at all! I have a couple of tips and tricks you can try. WD-40, a de-icer, or Graphite Spray are lubricants that keep water out of locks to prevent freezing. You could also smear some petroleum jelly on the lock, it works the same as WD-40 or the graphite spray. Since the lock is already frozen, you could dip your key into some hand sanitizer. The alcohol from the hand sanitizer should melt the ice after you wiggle it around a bit. Try some of these out and let me know how it works for you and we can go from there.