1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118682
lowest price pledge
Retail:$97.48
Our Price: $78.69
You Save: 19%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.77 lbs
Quantity: 
In Stock
Tekonsha 4 Flat Custom Fit Vehicle Wiring - 118682
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. Call 800-298-1624 to order Tekonsha custom fit vehicle wiring part number 118682 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (34009)
  • Q & A (7)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118682

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Tekonsha
  • Powered Converter

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points behind tail lights
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite that connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery. Connect the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118682 Tekonsha T-1 T-Connector - 4 Wire - Modu-Lite Converter Included

Installation Details 118682 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118682

Average Customer Rating:  4.8 out of 5 stars   (34009 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

- 118682
by:

Installation was easy. Hitch has worked fine for the first year. I was worried that the "kick-to-open" feature would not work on my Lincoln MKX after the hitch was installed, but it still works just fine. A word of caution: When working with the hitch (changing balls, mounts, connecting wiring , safety chains, etc.), locate your key fob someplace away from the vehicle because the rear door will open and close unexpectedly if you keep the fob on your person.



- 118682
by:
2016 Lincoln MKX

My son & I were able to install the hitch and wiring harness in about 3 hours. The videos to install gave me the confidence I needed to do the job correctly and safely. Good job! Due to the bumper fascia of the 2016 Lincoln MKX, I did not want to fasten the mounting bracket for the 4-pole connecter on the fascia itself. So I ordered the no-drill long bracket (#18136) and bent the strait end 90° to form a shape of a long [. I was then able to attach the long bracket on the hitch and bolt the mounting bracket on the other end of the long bracket. The 4-pole connecter is now just below the bumper facial and easy to get at. Very clean look and sturdy!



- 118682
by:



- 118682
by:



- 118682
by:



- 118682
by:

Molly did a great job.base plate, trailer hitch, wiring kits, etc.,all arrived in perfect shape,in only a couple days.all parts are correct,I have a garage lined all these idems next week.



- 118682
by:



- 118682
by:

Fitment was spot on. Very quick shipping Great company to work with. Will be definitely using them again when the customer wants a hitch installed



- 118682
by:
2016 Lincoln MKX

I always use etrailer when possible for my towing and rv needs. They have the best customer service. They always add a personal touch with their communications.



- 118682
by:
2016 Lincoln MKX

every thing fit, worked great, still does, put on a 2016 Lincoln MKX worked perfect.



- 118682
by:

Got the package but no instructions were with it


Comments
If you use the links provided below, you can see both the installation instructions as well as an install video.
-- Etrailer Expert Mike L - 04/05/2019


- 118258
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Product quality very high, delivery very fast, shipping container (cardboard box) was not strong enough to support handling/shipment, box bottom was ruptured with hitch assembly hanging out, box should be supported stronger, no parts missing, hitch was scratched up somebut, nothing that a little black paint didn't fix. I installed the wiring harness connections and fuse box on the external side of the vehicle to eliminate having to take apart the internal sheet metal panels and providing easy access to the fuse in the event of fuse failure, this eliminates the necessity of interior Panel removal to change a fuse. Easy installation, product has great great design features ,great customer service with prompt delivery. Just ordered the bracket (#18140) to secure the 4 prong plug to the hitch neatly and secure to eliminate the loose plug. (not shown in photos (Bracket in transit),


Comments
Great, works like a charm.
Anthony J - 09/27/2020


- 118265
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


I purchased this for my 2013 Honda Pilot EX-L. I have not used the wiring harness yet, but the installation was extremely easy and quick. The instructions were very straightforward, and I was able to install everything within 30 minutes. Everything you need is inside the package except some bolts/nuts to mount the connector. I decided to cut out a hole and drill some holes for bolts. I opted for some black ones to match the colors. I'm extremely happy with this product and etrailer's fast and reliable service.



- 118252
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Just installed Draw Tight hitch, wire assembly along with the brackets for a nice look. Everything went smooth with installation and it has a nice clean look as the hitch is well hidden. This is going to work for our bike rack and the cargo carrier I am now going to by. Now I can also get a small utility trailer to pull and haul stuff. I strongly recommend etrailer for all your needs as they communicated with me the whole way through and readily replaced a lock unit that somehow came without the key. Customer service is top notch.


Comments
Absolutely Fine!
Scott N - 04/26/2020


- 118248
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Wish I bought etralier's tow harness earlier. Easy installation. Toyota dealership sold me the wrong one and of course waited too long to return. But use some of the parts from that harness on the one from etrailer(see pics). Would order again from etrailer. Thank you



- 118264
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


This is a perfectly tailored product for the do-it-yourselfer who with a little help adds a nice hitch to his vehicle. Getting an older vehicle's OEM installed weld nuts clean takes most of the time followed by installing the two washers and nuts in the fascia area. That part needs patience as the work area is limited. The Curt LED 4-Way Flat Connector (Vehicle End) Tester makes it very simple to verify the Tow Package - 4-Pole Flat Trailer Connector that is a snap to install to the vehicles pre-existing harness. One point to pay attention to in the instructional video is when pulling the square washer and bolt through the channel. They must slide in single file as shown. If you try to pull with the bolt through the washer it will get stuck and you will need to fish it out. So bottom line. Great product. Great support. Steve Stewart


Comments
Everything from the hitch to the wiring still works perfectly. Very pleased with the results
Stephen - 05/07/2020


- 118269
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Plug & play for 2020 Kia Sorento. Dinged a star because the trailer connector does not fit the extra bracket well. It does not appear to have been designed for a bracket mount. I had to force fit and secure in place with a zip tie.



- 118265
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Needed a harness for my 2015 Honda Pilot LX and didn’t want to pay a king’s ransom for dealer parts and install. Ordered from etrailer and got a deal. Came with everything I needed and also had excellent, easy to understand instructions. Works perfectly.


Comments
This harness has worked like a charm. No problems at all.
Randy B - 06/01/2020


- 118248
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Instructions provided with adapter are good. My 04 Highlander without tow package had the connector under rear, driver-side cargo tray. Lift the cargo floor, remove the tire-change-tool tray, remove the two plastic nuts on the bottom of the left-side tub, and lift it out. Also under that storage tub is an unused 6mm threaded hole in the body to be used for the ground. Put a fuse in the correct spot of engine compartment fuse block (mine was empty) and good to go. See underside of fuse block lid for tow adapter fuse placement.


Comments
Used 20 times this summer with no issues. I would buy again.
Michael A - 01/09/2021


- 118252
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


FITS the new 2020 HIGHLANDER! There is a new connector with the 2020 Highlander redesign under the driver side rear bumper. This cable plugs directly into the Highlander connector. See photo. There is no need to route or run wires for the trailer wiring. You will also need a converter to provide the correct signals to this cable. I recommend using the Toyota Plug-n-play converter part number: PT725-48200. It’s around $60 online. Be aware it is installed behind a panel located next to the driver’s side second row seat. Toyota completely changed the vehicle wiring for the 2020 model year. I also recommend the CURT C99FR hitch. Fits perfectly, easy to install and hides behind the bumper.



- 118266
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


This kit worked great. It took about an hour to install on my 2005 Xterra. The process was just like the video on etrailer.com. The only difference was that I mounted the bracket directly to my bumper instead of the hitch.


Comments
Working great. Im glad I purchased the 7-pin version for this car
Keith - 07/16/2020


- 118266
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


The hitch is great, but the screws for the electrical connector have rusted.


Comments
It’s still working. The screws are still rusted, though.
Tim M - 07/18/2020


- 118253
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Jesse at eTrailer help me with configuring my 2009 Honda Pilot to be able to pull legal loads. I had previously installed their 4 pin connector but I want to be able to use trailers with brakes to full extent. I added a Redarc brake controller in a convenient location. Easy to replace the current harness with the 7 way connector. A little more work to pull panels to locate the Redarc control head exactly where i wanted it, but no biggie. As always, great customer service and a great product. Thanks Jesse and all at eTrailer.



- 118259
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Plug and play! This trailer power cable plugged directly into my factory Cadillac SRX wire harness. No wire cutting and splicing, absolutely the easiest installation I could imagine. Highly recommended for anyone who can use it. See photos showing the purchased product and where it plugged into the factory wiring harness.



- 118255
by:

Review from a similar T-One in Custom Fit Vehicle Wiring


Excellent prompt personal service. Website made it easy to select the correct components for my particular SUV. Was kept informed throughout the delivery process, I knew exactly where my package was and when it would arrive. Would certainly recommend using etrailer - a great and professional service. Fitting the wiring was a breeze, once the appropriate socket for the trailer module was located (hiding behind the rear R/H side fascia panel)


36
3643
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

  • Does Tekonsha Trailer Wiring Kit # 118682 fit 2019 Lincoln Nautilus
    We do have several options that will work on your 2019 Lincoln Nautilus, but you are correct when saying part # 118682 will not fit the 2019 Lincoln Nautilus. Currently we do not have any wiring harnesses that plug in behind the taillights for this vehicle, so you will be required to either hard wire in behind the tail lights or go with a zero contact interface (ZCI) style wiring kit. The first option is a Curt # C59236 . This is a universal wiring harness that fits your vehicle and...
    view full answer...
  • Comparison of Draw-Tite Hitch Receiver vs Curt Hitch Receiver on 2018 Lincoln MKX
    Either the Draw-Tite Hitch Receiver # 75234 or the Curt Hitch Receiver # C78KR would be a great addition for you 2018 Lincoln MKX. I recommend the Curt Hitch Receiver # C78KR as it offers the same maximum Tongue Weight (TW) rating at 675lbs, and Gross Trailer Weight (GTW) rating of 4500lbs. In my experience the powder coat finish the Curt uses is more durable and less likely to chip or scratch, and the Curt Hitch Receiver # C78KR is also made in the USA. Make sure to review your owners...
    view full answer...
  • Trailer Hitch Recommendation for 2018 Lincoln MKX
    For your 2018 Lincoln MKX the best hitch option is the Draw Tite part # 75234 as it has the best weight capacities and the best price. For trailer wiring you'd then want the part # 118682 which is a confirmed fit. Install video attached below. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,...
    view full answer...
  • How To Choose The Right Ball Mount For 2017 Lincoln MKX With Draw-Tite Trailer Hitch
    The Draw-Tite Maxx-Frame Trailer Hitch # 75234 is a good fit for your 2017 MKX. This is a Class lll hitch and it has a 2-inch receiver opening. You do want to tow the trailer as level as possible. I have attached a link to an installation video for this hitch on an MKX. As shown in the video, the distance from the ground to the top of the hitch opening is 12-1/4 inches. This is done when the vehicle is parked on a level surface. You can get a good idea what ball mount will work...
    view full answer...
  • Curt Hitch on a 2018 Lincoln MKX
    I'm happy to inform you that the Curt Hitch, part # C78KR, does indeed fit with your 2018 Lincoln MKX. This hitch is custom designed for the MKX line and features a simple installation process. It's a Class III hitch and can handle up to 4500 pounds of gross trailer weight and 675 pounds of tongue weight, so you will be able to haul a variety of accessories. If you're looking to use a trailer with this hitch, then I recommend the T-One Vehicle Wiring Harness, part # 118682, for wiring....
    view full answer...
  • Will Hands Free Liftgate Still Function With Install of Draw Tite Hitch on 2017 Lincoln Continental
    Your hands free liftgate function on your 2017 Lincoln Continental will still work with the install of a hitch like the Draw Tite part # 36596 that you referenced. At worst you might have to kick your foot to either side of the hitch opening but it will still work just fine. If you were in need of trailer wiring as well the Tekonsha kit part # 118682 is the best option as it installs very easily and also has the most reliable converter box of the kits we offer.
    view full answer...
  • Will Trailer Hitch from Buick Enclave Fit Lincoln MKX
    The Draw-Tite Class III # 75528 and the Curt Class III Trailer Hitch # 13424, which are the available trailer hitches confirmed to fit the 2014 Buick Enclave, are compatible with certain model years of the GMC Acadia, Saturn Outlook and the Chevy Traverse. However, the trailer hitch on your Buick Enclave will not fit your new Lincoln MKX, as the body styles are simply too different between the vehicle models. If you are able to tell me the year of your Lincoln MKX, I will be happy to...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video Edited:
Chris R
Employee Sarah W
Updated by:
Sarah W
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.