New Arrivals

Your old left brake is worn out and pulling uneven. You bolt on the new assembly, connect the wires, and it adjusts itself with every stop. Braking's balanced again and the trailer's back to doing what it should.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• LH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Terran Axle

Replaces the mounting hardware needed to install TruXedo Elevate TS rails on your 2007 to 2021 Toyota Tundra.

• Accessories and Parts
• Ladder Racks
• Mounting Hardware
• Truxedo

Replaces the side rail end plug for your TruXedo Sentry or Sentry CT tonneau cover. Installs on the driver's-side rail.

• Accessories and Parts
• Tonneau Cover
• Rails
• TruXedo Sentry
• TruXedo Sentry CT
• Plugs
• Truxedo

Your trailer's braking feels off and the right side's worn. You bolt up the new assembly, wire it in, and you're done. It adjusts automatically and brings the trailer to a smooth, steady stop every time.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Terran Axle

Custom base rails are specifically designed to fit your vehicle. Required to mount your TruXedo Elevate Rack System, these rails work with both telescoping and fixed racks (sold separately). T-slot channels accept a variety of accessories.

• Accessories and Parts
• Ladder Racks
• Base Assembly
• Truxedo

Your old left brake is worn out and pulling uneven. You bolt on the new assembly, connect the wires, and it adjusts itself with every stop. Braking's balanced again and the trailer's back to doing what it should.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• LH
• 7000 lbs
• 6000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Terran Axle

Replaces the passenger's-side strap for your TruXedo Sentry tonneau cover. Works with all TruXedo Sentry tonneau covers.

• Accessories and Parts
• Tonneau Cover
• Straps
• TruXedo Sentry
• Truxedo

Custom base rails are specifically designed to fit your vehicle. Required to mount your TruXedo Elevate Rack System, these rails work with both telescoping and fixed racks (sold separately). T-slot channels accept a variety of accessories.

• Accessories and Parts
• Ladder Racks
• Ladder Rack Base Rails
• Truxedo

Rough roads turn towing into a battle against bouncing and jarring shocks. This system fights back, absorbing road shock for a smoother tow. With a 5" rise and 4" drop, it fits your setup for better control and a more comfortable ride.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1100 lbs TW
• Fits 2 Inch Hitch
• Air Equalizer
• Shocker Hitch

Tired of your jack sinking or your trailer feeling unsteady? This footpad adds a wide base for solid support on gravel, grass, or dirt. Fits jacks with 2-1/4" outer diameter tubing and 2" inner tubing for a steady setup every time you park.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Jack Foot
• Ultra-Fab Products

Add this LED third brake light to your Outlander soft truck topper to make your truck more visible to vehicles behind you. Connects to a 12-volt power source and mounts on the rear bow of your truck topper. Water-resistant seal prevents damage.

• Accessories and Parts
• Truck Topper
• Lights
• Outlander

Replaces 52" TruXedo Elevate TS rails for your TruXedo Lo Pro tonneau cover.

• Accessories and Parts
• Tonneau Cover
• Rails
• TruXedo Lo Pro
• Truxedo

If you're setting up your Tmat system and need to cover a spot, this single panel does the job. Maybe one broke, or you're building a custom setup in a van or trailer. It lets you finish the setup without having to buy more than you need.

• Accessories and Parts
• Truck Bed Mats
• Panels
• Tmat

These short blockers snap into your Tmat to help keep smaller gear in place. They help secure tool bags, buckets, small coolers, and other items that tend to slide or shift during the drive.

• Accessories and Parts
• Truck Bed Mats
• Blockers
• Tmat

These adjustable blockers snap into your Tmat to help keep odd-shaped gear in place. They slide open or closed to fit around jacks, buckets, or grouped tools that do not sit flat. They're perfect for when nothing else fits quite right.

• Accessories and Parts
• Truck Bed Mats
• Blockers
• Tmat

Give yourself a solid grip to minimize the risk of falling. This handrail includes hardware to attach it to your Taylor Made SafeStep triple dock steps (sold separately). One-piece, anodized aluminum rail won't rust and holds up to saltwater.

• Accessories and Parts
• Dock Accessories
• Dock Steps
• Handrails
• Taylor Made

Sometimes your Tmat setup leaves a small gap, maybe near the wheel well or along the edge. This set includes two interlocking pieces you can use to close those spaces and connect panels, so the setup feels more stable and looks finished.

• Accessories and Parts
• Truck Bed Mats
• Panels
• Tmat

Loose Fit Anchors are made for custom Tmat setups. They bolt directly to the Tmat grid, giving DIYers a solid base for mounting buckets, tool bags, tie-downs, or anything else you want to secure your own way.

• Accessories and Parts
• Truck Bed Mats
• Anchors
• Tmat

Kick mud to the curb with this lightweight, no-nonsense shoe scraper. It clears your soles fast, won't hold grime, and packs away clean in the included carry case - perfect for campsites, job sites, and everything in between.

• Accessories and Parts
• RV Steps
• Boot Brush
• Weigh Safe

Keep your GMC or Chevy MultiPro tailgate from hitting your Weigh Safe hitch with this durable, rubber bump stop. Fits snugly on your hitch to protect tailgate from dents and paint from scratches when folded down.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Rubber Stops
• Weigh Safe

Only for use with 8.5K and 12.5K systems, this shank offers up to a 4" drop and a 5" rise for your Weigh Safe True Tow weight distribution hitch. Measures 11" long and fits 2-1/2" x 2-1/2" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1100 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 4 Inch Drop
• Square - 5 Inch Rise
• Weigh Safe

Replaces the 8 oz stainless steel pet bowl for your WeatherTech pet feeding system. Great for if you want to have another bowl while the other is in the dishwasher.

• Accessories and Parts
• Pet Supplies
• Pet Bowls
• WeatherTech

Replaces the 64 oz plastic pet bowl for your WeatherTech pet feeding system. Great for if you want to have another bowl while the other is in the dishwasher.

• Accessories and Parts
• Pet Supplies
• Pet Bowls
• WeatherTech

Replaces the 32 oz stainless steel pet bowls for your WeatherTech pet feeding system. Great for if you want to have another set of bowls while the others are in the dishwasher.

• Accessories and Parts
• Pet Supplies
• Pet Bowls
• WeatherTech