Inno Square Crossbars - Steel - Black - 54" Long - Qty 2
part number: INB137

Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4
part number: INSUT

Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet
part number: INK497

Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?

• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  
• The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...


• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  
• For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the
  view full answer...


• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  
• For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short
  view full answer...


• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  
• The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...


• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  
• Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...


• Will the Thule Hullavator Pro Kayak Carrier Work W/ Inno Square Crossbars?
  
• I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898 is compatible with both the Inno Crossbars # INB137 you were looking at as well as your Thule crossbars that have the channel down the middle. Since you already have crossbars you don't need to use the Inno bars . The only reason you'd need to swap your bars out would be if you don't have 4"-8" of overhang past your
  view full answer...


• Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails
  
• The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts: - 54" Square Crossbars # INB137 - Inno Feet # INFR As long as your crossbars are at least 54" you just need the feet and you're good to go!
  view full answer...


• Do the Inno Square Crossbars fit the Thule Pass Through Foot Packs
  
• Yes the Inno Square Crossbars part # INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part # TH450. As you know they are a pass through style bar so you have the option of using any length cross bar you would like. I generally stay inside the vehicle mirrors because it gives you a good reference point of how wide they are on the rooftop.
  view full answer...


• Replacement Square Bar Solution for Older Thule Square Bar Roof Rack
  
• The older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the # INB137 for a set that is 54 inches long. The new Thule square bars attach to the feet with a track on the bottom side of the bars instead of the feet grabbing around the bars.
  view full answer...


• Square Crossbars Compatible with Older Thule Crossroad 450 Feet
  
• The old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the older 450 feet so we need to look to a different manufacturer. We have actually found that the Inno Square Crossbars have the same dimensions as the older Thule crossbars so they will be compatible with the older Thule feet like what you have. I
  view full answer...


• Roof Racks for 2014 Lexus LS 460 with Shorter Crossbars
  
• I can't find any reference to Rhino Rack crossbars that fit your 2014 Lexus LS460L so we can't verify a Rhino Rack roof rack for your vehicle. Our most economically priced option that fits your vehicle is the Inno Square Bar Rack part numbers # INB137, # INSUT, # INK771 which the crossbars of this kit are 54 inches long. If instead you were looking for the shortest crossbar option you'd instead want the Inno Aero Bar roof rack part # INXB115-2, # INXS200, # INK771.
  view full answer...


• What are the Dimensions of the Thule Square Bars
  
• I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like # INB137.
  view full answer...


• Can Roof Rack Rated for 100 lbs on 2016 Honda Civic Carry a 95 lb Fishing Kayak
  
• The Inno Square crossbar roof rack for your 2016 Honda Civic (parts linked below) do have that 100 lb weight capacity and will hold your 95 lb fishing kayak but you'll need to find a lightweight kayak carrier to do so since you only have 5 lbs to work with. You might be able to use the Rhino-Rack SUP and Surfboard Pads w/ Tie-Downs # RRRWP03 since these are lightweight foam pieces. 54" Square Crossbars - # INB137 Feet - # INSUT Fit Kit - # INK683 Aside from this you'll need to look
  view full answer...


• Best Priced Roof Rack to Attach to Rain Gutters on Top of 1994 Jeep Cherokee
  
• I have a really great option that I think covers what you are looking for perfectly. For your son's 1994 Jeep Cherokee that has a naked roof with rain gutters we have the Inno roof rack part numbers # INB137 and # INLD as a confirmed fit which is priced really well too. Unlike some of the other rack brands with Inno you get a really solid and high quality rack and a much more reasonable price. This will attach directly to the rain gutters of his roof and will also work with your roof basket.
  view full answer...


• Recommendation for Cost Efficient Roof Rack on 2015 Honda Civic 2-Door
  
• For your 2015 Honda Civic, I recommend the Inno Square Bar Roof Rack. This system will include # INB137 for the two 54 inch Square Crossbars, # INSUT for the Feet and # INK642 for the Custom Fit Kit. This is the most cost efficient roof rack that is confirmed to fit the 2-door model of your vehicle. This is a very nice, sturdy system with elastomer coating to resist corrosion and the crossbars will be compatible with most roof accessories. I have attached a demonstration video along
  view full answer...


• Front Hitch, Roof Rack and Upright Load Bar Recommendation for a 2012 Ford F-150
  
• I have a great setup for you. You will want the following part numbers: Inno Square Load Bar # INB137 (Thule no longer makes the bar but they are the same size) Thule Traverse Roof-Rack Foot # TH75222479002 (x2) Rhino-Rack T-Load Hitch Mounted Load Bar # RTL002 Thule Roof-Rack Fit Kit # THKIT1521 Curt Front Hitch part # C31068 This will give you a single crossbar roof rack with a front hitch and upright crossbar assembly for transporting your kayaks. Proper installation of this
  view full answer...


• Inno Square Bar Roof Rack and Fairing that Fits 2005/2006 Scion xB
  
• The correct parts needed to install an Inno roof rack on your 2006 (or 2005) Scion xB would be part # INB137, # INSUT, # INK263. Then for a fairing you would need the # INA262 and you'd be set.
  view full answer...


• Recommended Inno Roof Rack Fairing for Inno Roof Rack on 2018 Mazda 3
  
• For your 2018 Mazda 3, the Inno square bar roof rack consisting of # INB137, # INSUT, and # INK440 is a confirmed fit and a fairing is a great idea. The fairing I recommend for that system is the Inno Fairing for Roof Racks - 48" Long - Black # INA262 which will help minimize the wind noise by creating a more aerodynamic shape. This will give you the best wind deflection for those 54 inch bars and provide a better driving experience.
  view full answer...


• Roof Rack Options for 2011 Hyundai Tucson with Panoramic Sunroof
  
• We offer a number of roof racks for the 2011 Hyundai Tucson with panoramic sunroof. The racks that are compatible with your exact version of the vehicle will depend on its roof style. The link provided will take you to our fitguide page for Tucson roof racks and at the top of the page you can select the type of roof on your vehicle (either a naked roof with no sort of hardware or a roof with raised side rails). This will allow you to see compatible roof racks. Systems are available from
  view full answer...


• What is Crossbars Spacing of Inno Roof Rack that Fits 2014 BMW 540 Sedan
  
• The distance between the Inno roof rack crossbars on center is 660 mm/26 inches which is pretty close to what you need so the part numbers # INXB130-2, # INXS250, and # INK403 could maybe work, but it depends on how exact you need it to be to 27.5 inches.
  view full answer...


• How to Use Older Thule Square Bars with 2017 Toyota Highlander with Naked Roof
  
• Hey John, I do have a solution for you but the Thule square bar roof racks changed a few years ago and now their current feet don't work with the older style of crossbar. The new crossbar has a channel that runs along the bottom of it whereas old style did not have this. But we have found is that the Inno square bars are exact same dimensions so you can use their feet and fit kit with the bars you have now. For that you'd need the part numbers # INK666 for the correct fit kit and part
  view full answer...


• Replacement Lock Cover for Inno Feet
  
• Hi Scott; sorry for the delay on this it took a while to hear back from Inno. The part you need is the Replacement Lock Cover Set for Inno Roof Rack Feet Stays for Bare Roofs # IN97YV. This replaces the lock and cover on the # INSUT. However, this will be a random lock so more than likely it won't match the others on your roof rack. We don't have a way to get a specific lock core for it to remain keyed alike.
  view full answer...


• How to Mount Old Thule Square Bars to 2020 Toyota Camry
  
• Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
  view full answer...


• How To Determine Crossbar Placement On A 2024 Ford Maverick
  
• Hello Warren, I can definitely help. Roof rack manufacturers test vehicle roofs to determine the strongest points. They develop their fit kits to fit in this predetermined spot. So, this measurement will vary from vehicle to vehicle. For a 2024 Ford Maverick, the front crossbar will be placed 12-1/4" back from the top edge of the front windshield. The rear crossbar will be placed about 27-1/2" behind the front crossbar. There may be a bit of front/back wiggle room, but generally you will
  view full answer...


• How to Fit Older Thule Square Crossbars on a 2017 Ford F-150
  
• I have an alternative solution for you to use your older Thule square crossbars on your 2017 Ford F-150, but there unfortunately aren't any fit kits that will work with the Thule 480 you need for your square bars. The fit kit 1689 is discontinued and was for a Lexus GS-Series vehicle as well so even if you were able to find it as a resale shop it wouldn't fit your F-150. Instead I recommend picking up the Inno Feet # INSUT and Fit Kit # INK139. This sounds a little weird but we've found
  view full answer...


• Parts Needed to Install Older Thule Square Crossbars on 2019 Chevy Volt
  
• Since the Inno crossbars are the same dimensions as the older Thule crossbars like what you have you can use the Inno feet # INSUT and Inno fit kit part # INK688 to install your current Thule bars on your roof.
  view full answer...


• Best Roof Racks for a 2005 Toyota Celica
  
• There are a few roof rack options for your 2005 Toyota Celica. First we have an Inno roof rack using the following parts: Bars # INB117 Feet # INSUT Short roof adapter # INJK Custom fit kit # INK165 Next we have a semi-custom SportRack roof rack using the following parts: Semi-custom rack # SR1008 Short roof adapter # SR1116 And we have a SeaSucker option that use incredibly strong vacuum cups # 298-SX6000B. Out of these options the SportRack cost the least but isn't
  view full answer...


• Roof Rack for Old Thule Square Crossbars on 2022 Ford Maverick
  
• Thank you for all of the information! Since you're wanting to use your older Thule square crossbars you will need to use the Inno legs and fit kit as Thule updated their roof rack system a few years ago and their newer legs don't work with the older square bars. The Inno square bars have the same dimensions as the older Thule bars though which is why their kits are compatible. As of right now (January 2022) the only roof rack fit listed that fits this criteria is for the 2022 Ford Maverick.
  view full answer...


• Can Inno Mounting Feet Work with Older Thule Square Bars on 2017 Chevy Volt
  
• If you have the older style Thule square bars (without a channel on the underside of the bars) then they are indeed compatible with the Inno Feet # INSUT. The older Thule square bars and the Inno Square Bars # INB127 feature matching dimensions of 7/8 inch tall and 1-1/4 inches wide. Since you already have compatible crossbars you can just get the Inno Feet # INSUT and the Custom Fit Kit # INK688 (which is what actually secures to the vehicle's roof) for your 2017 Chevy Volt.
  view full answer...


• Is There A Roof Rack Available For A 1998 Toyota Celica?
  
• Yes, we do have a roof rack available for your 1998 Toyota Celica GT 2.2L Liftback model. That is a cool car, you don't see those around too often. I recommend the Inno Square bar roof rack. The complete roof rack system consists of the following parts. Crossbars - # INB117 Feet - # INSUT Adapter kit - # INJK Fit kit - # INK111 This will be everything you need, locks included. Please note that with this setup, it is not recommended to load items longer that 98" on the crossbars.
  view full answer...


• Inno Square Roof Rack Part Numbers that Fit 2019 Toyota RAV4
  
• Inno has a square bar roof rack that fits your 2019 Toyota RAV4 with the part numbers # INB117 for the square bars and part # INXP for the feet of the rack and then for the fit kit part # IN33FR. Since you have square bars already you'd just need the feet and the fit kit.
  view full answer...


• Recommended Roof Rack to Fit a 2011 Scion XB
  
• We carry a few different roof rack systems the will work on your 2011 Scion xB. I recommend the Rhino-Rack Vortex Aero Rack System, # RRVA137B-2 Vortex Aero Bars, # RRRLKVA 2500 Series Legs, and # DK152 Fit Kit. The Vortex crossbars are a more aerodynamic bar that will cut down on wind drag and noise. The bars are constructed of lightweight aluminum and provide a low-profile and sleek design. All the racks listed can carry up to two kayak. However, consulting your owner's manual
  view full answer...


• Will The Inno Feet For Square Crossbars Work With My Older Thule SquareBars On My 2019 Ford F-250?
  
• The Inno Feet for Square Crossbars # INSUT that you mentioned will not fit your 2019 Ford F-250, unfortunately, however I have another solution for you. If your SquareBars are the Evo bars, then you can use the: -Evo Clamp Feet for Thule Crossbars # TH710501, with the, -Fit Kit for Thule Evo Clamp Roof Rack Feet # TH29TX. These will only work with the Evo style crossbars with the bottom channel, however if you don't have the bottom channel then you have the older style of bars
  view full answer...


• Recommended Roof Rack for a 2014 Mazda CX-5 With a Naked Roof
  
• You almost have everything, you're just going to need a fit kit # INK758. This kit will allow you to mount the Inno Feet for Square Crossbars # INSUT to your 2014 Mazda CX-5. The # INSUT crossbars you mention have a dynamic weight capacity of 220 lbs, measures 50" long, 7/8" tall, and is 1 1/4" wide.
  view full answer...


• What is Needed to Mount Inno Feet to 2019 Mazda CX-5 With Bare Roof
  
• For your 2019 Mazda CX-5 with a bare roof, you will also need a fit kit to mount the Inno Feet for Square Crossbars # INSUT. Fit kits are designed to conform to specific vehicles and give the feet a mounting point, which is why they are needed, and the correct kit for your '19 CX-5 is the Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK497.
  view full answer...


• Inno Roof Rack Fit on 2019 Chevy Volt With Naked Roof For Carrying a Kayak
  
• Yes, there is an Inno roof rack that fits your 2019 Chevy Volt with a naked roof that will allow you to carry a kayak. The roof rack you were referring to is made up of three parts - the bars, feet, and fit kit. The correct parts for your '19 Volt are the following: - Inno Square Crossbars # INB127 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK688 Then for the easiest loading of your kayak on the roof rack, I recommend a J-style carrier, which will allow you
  view full answer...


• How to Fit Older Thule Square Crossbars on a 2015 Toyota Corolla Sedan Naked Roof
  
• Thanks for reaching out! To utilize your older Thule square crossbars on your 2015 Toyota Corolla Sedan you'll need to use the Inno Feet # INSUT and their Fit Kit # INK306. The new Thule square crossbars have the slots on the bottom so they mount to different legs whereas the Inno square bars have the same design and dimensions as the older Thule square crossbars which is why these feet are compatible with your Thule bars.
  view full answer...


• Adding A Thule SquareBar Roof Rack To A Fiberglass Camper Shell
  
• Hi Shane, Typically with camper shells we recommend installing a Thule Top Tracks for Roof Racks on the roof of the shell so that you can install a roof rack and be able to slide it around in the tracks to fit your various needs. We offer these tracks in the following sizes: 42" # THTP42 54" # THTP54 60" # THTB60 From there you can use fit kit # THKIT3101 and Rapid Podium Feet for Thule Crossbars # TH460R to connect your SquareBars.
  view full answer...


• Can I Use Thule SquareBars From Another Vehicle On My 2017 Volkswagen Passat?
  
• You will need to use an Inno product for the old bars to fit. The new feet and bar style uses a channel to mount and the old ones wrap around the bar. Luckily the Inno bars are the same size so you can use the Inno Feet # INSUT this custom fit kit # INK591 This kit is designed to fit your 2017 Volkswagen Passat! I've included a video of the installation on a 2014 Passat. Pretty straight forward but be sure to watch the video before you attempt the install.
  view full answer...


• Would Excessive Speed Cause Inno Roof Rack of 2016 Toyota Prius to Fly Off
  
• The Inno roof racks like the part numbers # INB127, # INSUT, and # INK486 are very well made and would easily handle the speeds your 2016 Toyota Prius would be going on the highway. There isn't a speed limit for this rack but we do recommend not exceeding the speed limit.
  view full answer...


• Replacement Crossbar Recommendation For An Older Thule SquareBar System Going on A 2021 Mazda CX-5
  
• The Thule Traverse Roof-Rack Foot Pack 754/480 has been discontinued for a bit now so they are not going to be available for your new 2021 Mazda CX-5. In addition to that, since Thule changed the way the SquareBar attaches to the new feet you'd actually have to order a new SquareBar system. The Thule SquareBar Evo Crossbars # TH712400 with the Evo Clamp Feet for Thule Crossbars # TH710501 and the Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145079 is the new and improved
  view full answer...