Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs
part number: C16115

Curt Custom Fifth Wheel Installation Kit for Ford - Gloss Finish
part number: C93WR

Ask the Experts about this 5th Wheel Hitch
Do you have a question about this 5th Wheel Hitch?

• Will Curt Fixed Fifth Wheel Hitch Work with Demco Rail Kit Adapter and Reese Revolution Pin Box
  
• Hey Carl, yes the Curt E16 hitch part # C16115 does work with the Demco rail kit adapter and a Reese Revolution pin box but due to it's loose jaw design it would not be my first choice. Instead I would recommend the Curt A16 part # C16120 which also fits both the rail adapter and pin box, has the same height range as the E16 but has a much nicer jaw design so it will be a lot quieter.
  view full answer...


• Will the Curt A16 5th Wheel Hitch Fit Same Rails as Curt A20 5th Wheel Hitch
  
• Yes, the Curt E-Series like part # C16115 fit the same base rails as the Curt A-Series like part # C16140 so you can switch between the two without issue. The old base rails will stay attached to the truck bed and you'd simply just swap out the hitch for one another.
  view full answer...


• Recommended 5th-Wheel Hitch that is Easily Removed on 2014 Ram 1500
  
• Choosing the right 5th-Wheel Trailer Hitch for your 2014 Ram 1500 will depend first on the weight of the trailer you plan on towing. You will want to make sure the truck and hitch have weight capacities that exceed the trailer's loaded weight. Since your Ram 1500 has a short 5-1/2 foot bed, the safest way to tow a trailer is to use a stationary 5th-wheel hitch and replace the pin box on the trailer with a Sidewinder, if it does not have one already. The Sidewinder will be required to
  view full answer...


• Distance Between Bed Rails for Installation of Curt E5 16K Fifth Wheel Hitch
  
• Do you know who manufactured your existing bed rails? The Curt E5 16K Fifth Wheel Hitch you referenced, part # C16115 are compatible with universal rails manufactured by Reese, Curt and Valley. A universal rail will have three mounting slots on each side of the rail, as shown in the photo with dimensions I have linked to. Your front and rear rail should be 22 inches apart, measured from the center of the front rail to the center of the rear.
  view full answer...


• Best Sidewinder Wedge Kit Fit for the Curt E16 5th Wheel Trailer Hitch
  
• I reached out to my contact at Curt and they advised me that once you actually bolt the Sidewinder Wedge # C16991 on the Sidewinder there should not be any wiggle room. The Sidewinder Wedge Kit for Curt E-16K Fifth Wheel Hitch # RP64FR will provide the same fit as the # C16991. I recommend using the # C16991 or the # RP64FR instead of the Universal Wedge because they are specifically made for the Curt E16 5th Wheel Trailer Hitch.
  view full answer...


• 5TH Wheel Rail And Install Kit To Use Curt E16 5TH Wheel On 2004 Ford F-150
  
• The Curt Custom Fifth Wheel Installation Kit # C16441-204 contains the rails and installation brackets which fit the 6-1/2' and 8' bed lengths on your 2004 Ford F-150. Then you will be able to install the Curt E16 5th Wheel Trailer Hitch Fixed # C16115 or Slider # 16516
  view full answer...


• Can Curt E16 Fifth Wheel Hitch be Used in Pucks of 2018 Chevy Silverado
  
• You can use the Curt E16 fifth wheel hitch part # C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part # C47BR which converts the pucks to the rail kit style this hitch needs.
  view full answer...


• Upgrading From Curt E16 to A16 on Ram 2500
  
• I'm assuming you have adapter rails like # C29BR in your Ram 2500 puck system which are industry standard rails. If that is the case then yes, you can install the Curt A16 # C16521 on the same rails. You can also swap out the head. The Curt R16 # C16560 is the base for both the E16 and A16. The A16 replacement head is the # C16520 and you will also need the head mounting hardware # C35UR.
  view full answer...


• Recommended 5th Wheel Adapter for Industry Standard Hitch to Work w/ the Ford Factory Puck System
  
• Yes, we do! To use your Curt E-16 item # C16115 with the Ford factory puck system you will need the Adapter Rails for Curt 5th Wheel Hitch item # C88KR. This picture frame style adapter will drop right down into your in-bed pucks and provide you with a base for 5th wheel hitches that mount to industry standard rails. Please note that the Curt item # C88KR adds 2-1/2" of height to your 5th wheel hitch when installed. I have linked a installation video below so you can see how to get this
  view full answer...


• Will the Curt E16 5TH Wheel Hitch Fit On RBW Rails That held a Little Rocker Hitch?
  
• Yes, the Curt E16 5th Wheel Trailer Hitch # C16115 will fit in place on your RBW 5th wheel rails that you have on your truck. You can verify the fit on your rails with the following measurements as well. The front to rear mounting rails will be 22" apart at the center of the mounting points. The Curt hitch will fit into the mounting holes that are 20-1/2" apart on center driver side to passenger side. Be sure to use a Curt 10" Fifth Wheel Trailer Hitch Lube Plate # 16721 on your pin
  view full answer...


• Difference Between the Curt A16 Fifth Wheel Hitch Head and the E16
  
• The Head Unit and R16 Roller Adapter # C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part # C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact which will minimize movement and noise. The A16 also features a color indicator system so that you can look at the indicator on the rear of the hitch to determine whether the jaw is in the correct position to uncouple (red), couple (yellow) or tow (green). Both
  view full answer...


• Does Curt E16 5th Wheel Hitch Fit Same Base Rails as Reese 5th Wheel Hitch
  
• A Reese 5th wheel hitch like the 30032 or 30033 you mentioned fits what are called industry-standard base rails, and the answer to your question is yes, the Curt E16 5th Wheel Trailer Hitch # C16115 will absolutely fit the same base rails as a Reese 5th wheel hitch. You will be able to use this new hitch on the base rails you already have without any issue whatsoever. I have added a link below to a video review for you to check out as well of the Curt E16 5th Wheel Trailer Hitch # C16115.
  view full answer...


• Curt E16 5th Wheel Hitch Leg Spacing and Compatibility
  
• The Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs # C16115 fits the industry standard rails you mentioned with a foot print of 22 inches by 20.624 inches on center. I've attached the measurements of the industry standard rails like you appear to have to show the fit and the E16 will work. If you just want the hitch head, the Replacement Head Unit for Curt E16 Fifth Wheel Trailer Hitch # C16515 is available.
  view full answer...


• 5th Wheel Rail Kit for a Curt 5th Wheel Hitch in a 2001 Ford F-150 Short Bed
  
• For your 2011 Ford F-150 with 6-1/2 foot bed you can use 5th wheel rail kit # C16437-204. The Curt E16 hitch # C16115 will fit but it is a fixed hitch. Short bed trucks require a slider hitch unless the trailer is very narrow or has a tapered front cap designed to be towed by a short bed truck. Otherwise the trailer can make contact with the truck cab when making tight turns. The slider version of the E16 hitch is # 16516.
  view full answer...


• Correct Base Rails for Curt E16 5th Wheel Hitch on 2021 Ford F-250
  
• In order to use the Curt E16 5th Wheel Trailer Hitch part # C16115 on a 2021 Ford F-250 you'll need the Curt Custom Fifth Wheel Installation Kit part # C79BR which is composed of the Curt Universal Fifth Wheel Base Rails part # C16204 and Curt Custom Fifth Wheel Bracket Kit for Ford part # C99BR. Please not, the base rails are not sold individually.
  view full answer...


• Can I Tow A Grand Design Reflection 303RLS With A 2018 Chevy 2500 HD?
  
• Yes, I believe you can tow a Grand Design Reflection 303RLS with your 2018 Chevy 2500 HD. With the 5th wheel towing limit of 13,500, you will be below capacity, even with the camper fully loaded. A fifth wheel hitch like the Curt E16 # C16115 will have sufficient capacity to tow your camper. I will say that the E16 is more of a budget option, and if you plan to tow frequently I recommend upgrading to a Curt A16 hitch like the # C16120. This will have much smoother head rotation, and
  view full answer...


• Can I Replace a Valley 7054 5th Wheel Hitch w/a Curt E16?
  
• You sure can! The Valley 7054 5th wheel hitch attaches to industry standard rails just like the Curt E16 item # C16115. Industry standard 5th wheel rails measure 22" from center to center of the rails. I have linked a diagram below so you can compare yours. Don't worry about the Reese logo in the middle. The Curt E16 item # C16115 will fit yours if they're industry standard and not a Reese model. If you come up with some different measurements feel free to email me directly or comment
  view full answer...


• Could Curt E16 Fifth Wheel Hitch be Used in Bed of 2013 Ram 2500
  
• You could use the Curt E16 fifth wheel hitch part # C16115 in the bed of your 2013 Ram 2500. You'd just need to have a rail kit installed as well with it. For that we have the Curt fifth wheel rail install kit part # C16430-204 which is a confirmed fit and would work well. This is a custom install kit which means that it will install easier and require much less drilling than a universal kit.
  view full answer...


• Is There Curt Fifth Wheel Rail Kit that Fits 2022 Ford F-150 Short Bed with Ride Height Sensors
  
• Hey Brett, I checked with Curt and their rail kit part # C93WR does fit your 2022 Ford F-150 6-1/2 foot bed and does not have any fit exclusions for versions that have the ride height sensors so this will work great for you.
  view full answer...


• Recommended Curt 5th Wheel Rails and Replacement Hardware
  
• Yes, you can. You will need the Curt Universal 5th Wheel Base Rails item # C16104 and the Replacement Hardware for Curt Universal 5th Wheel Installation Kit item # C16111. These will match up perfectly with the Curt Custom 5th Wheel Bracket Kit item # C86WR you already purchased. Please note that the hardware kit will supply hardware for both the rails to be installed and the brackets. There is no option for a hardware kit that only installs the rails. There are quite a few different
  view full answer...


• Will the Curt Custom 5th Wheel Install Kit Work With the Demco Autoslide 5th Wheel Hitch
  
• Yes, the Curt Custom Fifth Wheel Installation Kit for Ford # C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550040.
  view full answer...


• Can Curt Crosswing Fifth Wheel Hitch be Used with Pivoting Pin Box
  
• It's a bummer but you can't use a pivoting pin box with a fifth wheel hitch that only attaches to a gooseneck ball as the additional twisting torque that these types of pin boxes but on hitches requires four attachment points instead of just the center ball. Instead you'd need a set of standard fifth wheel rails installed in your truck like the Curt part # C93WR so that you can use the Crosswing that attaches to this rail style part # C92DR and the wedge # C85DR .
  view full answer...


• Fifth Wheel Rail Kit that Fits 2021 Ford F-150 5-1/2 ft Bed
  
• For a set of fifth wheel brackets that fit your 2021 Ford F-150 5-1/2 foot bed you'd want the part # C86WR which if you needed a complete kit instead you'd want the part # C93WR. You should note that you need to match the rail manufacturer with the bracket manufacturer so for the bracket kit I mentioned to work you'd need Curt rails.
  view full answer...


• Recommended 5th Wheel Hitch for 2021 Ford F150 With 5-1/2' Bed
  
• Due to the short bed length your options are greatly limited, but absolutely, pulling a 5th wheel RV with a 2021 Ford F150 and 5-1/2' Bed can be done. - Demco Hijacker Autoslide, # DM8550040 - Above-Bed Base Rails, # DM8552028-71 - 5th Wheel 90-Degree Wiring Harness, # DM8555002 I highly recommend the Demco Hijacker Autoslide 5th Wheel Trailer Hitch, # DM8550040 that provides a full 22-1/2" of additional clearance for tight turns. Slide hitches are commonly used in short bed
  view full answer...


• Are The Curt Custom Fifth Wheel Base Rails Compatible With An RBW X-16 Fifth Wheel Hitch
  
• The Curt Custom Fifth Wheel Installation Kit for Ford # C93WR are designed to the industry standard spacing so they will be a fit for your RBW X-16 fifth wheel hitch. I've attached a short video below where Ryan will walk you through the installation process if you plan on doing the installation yourself.
  view full answer...


• Recommended 5th Wheel Rail Kit for a 2022 Ford F-150
  
• For your 2022 Ford F-150, I recommend the Curt Custom Fifth Wheel Installation Kit for Ford item # C93WR. This custom install kit fits all bed lengths of the 2022 F-150. It installs in predrilled holes in your trucks frame. The rails are industry standard and are compatible with B&W, Curt, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley above-bed 5th-wheel hitches. I have linked an installation video below. To make towing with a 5th wheel easier I recommend adding the Curt 5th
  view full answer...


• Correct Curt Custom Fifth Wheel Installation Kit for a 2019 Ford F-150 with 5-1/2 Foot Bed
  
• Yes, the Curt Custom Fifth Wheel Installation Kit C93WR will fit a 2019 Ford F-150 with the 5-1/2' bed as well as those with the 6-1/2' or 8' bed. The Curt Custom Fifth Wheel Installation Kit does not require any drilling into the frame as it is a custom fit option. If you don't already have a 5th wheel hitch, the Curt A16 5th Wheel Trailer Hitch part # C16120 or part # C16521 is my favorite due to the dual interlocking jaw design which forms a very tight grip on the kingpin therefore
  view full answer...


• Do Curt 5th Wheel Base Rails Fit 2020 Ford F-150 With 5-1/2 Foot Bed
  
• I checked with Curt and can verify that the Curt Custom Fifth Wheel Installation Kit for Ford # C93WR does fit your 2020 Ford F-150 with a 5-1/2 foot bed.
  view full answer...


• 5th Wheel Rail Kit and Hitch Recommendations for a 2022 Ford F-150 with a 5-1/2 Bed
  
• Yes, the Curt Custom Fifth Wheel Installation Kit # C93WR will fit the 5-1/2' bed on your 2022 Ford F-150 and you can use the Universal Wiring # C57008 for an easier time connecting your wiring. When it comes to a 5th wheel hitch we need to look at a stationary one though because you won't have enough clearance for a standard sliding 5th wheel hitch - you need to use a stationary hitch with a replacement pin box that has a rotating turret so you trailer doesn't make contact with your
  view full answer...


• Correct Curt Custom Fifth Wheel Installation Kit for a 2023 Ford F-150
  
• I checked with Curt, the correct Curt Custom Fifth Wheel Installation Kit for a 2023 Ford F-150 is part # C93WR. This is an excellent kit that has everything you need to install a fifth wheel hitch like the Curt A16 5th Wheel Trailer Hitch with S20 Slider part # C23DR which is what I recommend. If you are just looking for something to get you by however, the Curt E16 5th Wheel Trailer Hitch with S20 Slider part # C95DR is a good option. The Curt Custom Fifth Wheel Installation Kit is
  view full answer...


• Brackets Needed to Install Curt 5th Wheel Base Rails on a 2017 Ford F-150
  
• It sounds like you have the Curt Universal Fifth Wheel Base Rails # C16104 that you're wanting to install on your 2017 Ford F-150. With this being the case I recommend getting the Curt Custom Fifth Wheel Bracket Kit # C86WR which comes with custom brackets (which means no drilling into your truck frame) and replacement hardware to get everything installed correctly. These rails and brackets give you the complete kit # C93WR which fits all bed sizes for your 2017 F-150. Please let
  view full answer...


• Fifth Wheel Base Rail Kit For 2022 Ford F-150
  
• The installation kit I highly recommend for your 2022 Ford F-150 is the following, from Curt: - Curt Custom Fifth Wheel Installation Kit for Ford # C93WR The reason for that is because this kit does not require any drilling into your truck's frame rails to install. Not having to drill is not only great for your truck but will benefit you whether you are doing the install yourself (saving hours) or having a professional do it (less install time equals less expensive labor costs).
  view full answer...


• Recommended 5th Wheel Rail Kit for a 2019 Ford F-150
  
• Yes, you can. The Curt Custom Fifth Wheel Installation Kit for Ford item # C93WR does fit your 2019 Ford F-150 and is compatible with Reese 5th Wheel Hitches. I have linked an installation video below. To make towing with a 5th wheel easier I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector item # C57008. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your
  view full answer...


• Recommended 5th Wheel Rail Kit for a 2018 F-150 XLT
  
• You have done your research well. I can confirm that the Curt Custom 5th Wheel Installation Kit for Ford item # C93WR is a confirmed fit for your 2018 Ford F-150 FX4 with a 5-1/2 foot bed. The Curt rail kit will provide you with industry standard rails that will fit not only your Curt 5th Wheel Hitch but also the Curt Gooseneck plate item # 16055. I have linked a couple of review videos for both products. I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole
  view full answer...


• Weight Capacity and 5th Wheel Hitch Recommendation for a 2018 Ford F-150
  
• According to the 2018 Ford Towing Guide the specs of your 2018 Ford F-150 can tow a 5th wheel trailer weighing up to 6,700 lbs which is pretty small when it comes to 5th wheel trailers. From what I'm seeing you have a 6-1/2' bed without a factory puck system as the max tow package looks to be for bumper pull applications. With that in mind I recommend picking up the Custom Bed Rail Kit # C93WR which installs without drilling into your truck frame and then using the Curt A16 # C16521
  view full answer...


• Correct Curt Custom Fifth Wheel Installation Kit for a 2023 Ford F-150
  
• I checked with Curt, the correct Curt Custom Fifth Wheel Installation Kit for a 2023 Ford F-150 is part # C93WR. This is an excellent kit that has everything you need to install a fifth wheel hitch like the Curt A16 5th Wheel Trailer Hitch with S20 Slider part # C23DR which is what I recommend. If you are just looking for something to get you by however, the Curt E16 5th Wheel Trailer Hitch with S20 Slider part # C95DR is a good option. The Curt Custom Fifth Wheel Installation Kit is a
  view full answer...


• 2021 Ford F-150 Base Rails for 5th Wheel Trailer Hitches
  
• What you can use for your 2021 Ford F-150 for 5th wheel base rails are either the the Demco Base Rails & Install Kit # DM8552028-71 or the Curt Custom Fifth Wheel Installation Kit for Ford # C93WR. I like the Curt as they are consistently high quality but either will allow your F-150 to tow a 5th wheel trailer.
  view full answer...


• 5th Wheel Base Rails & Brackets For 2019 Ford F-150
  
• We have exactly what you are looking for to mount a 5th wheel hitch in your 2019 Ford F-150. The correct 5th wheel base rails and install brackets that fit your truck are the following: - Curt Custom Fifth Wheel Installation Kit for Ford # C93WR
  view full answer...