bing tracking image

2010 Ford F-450 Super Duty Roof Rack by Yakima

Roof Rack Includes:

Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2

Part Numbers: Y00430,Y00146,Y79QR

Our Price: $526.29
This item qualifies for Free Shipping

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me

Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2
part number: Y00430

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.


  • Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
    • Pair with Yakima towers and a fit kit to create a complete roof rack
  • Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
    • Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
    • Aero-style bars reduce drag to help maintain fuel efficiency
  • Full-length design maximizes space for carriers and accessories
  • Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
    • Works with most universal-mount bike, water, snow, and cargo carriers
  • Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
    • Simply push down on the SmartFill strips to slide in accessories - no trimming required
  • Bottom channels allow for easy installation on Yakima towers
    • Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
    • Etched measurements on bottoms of bars help center rack on your roof
  • Lightweight aluminum bars are durable and rustproof
    • Internal JetTruss extrusions provide exceptional bar strength
  • Clear anodized alloy finish is corrosion resistant


  • Quantity: 2 crossbars
  • Crossbar weight capacity: 165 lbs
  • Dimensions: 70" long x 3-1/8" wide x 1" tall
  • T-slot dimensions: 1" wide x 1/2" tall
  • Limited lifetime warranty

Yakima JetStream

The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.

Aerodynamic JetFlow Design

JetStream Aerodynamic Design

The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.

Strong, Durable Construction

JetStream JetTruss Extrusion

The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.

Hassle-Free Installation

JetStream Bottom Channel

Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.

JetStream Etched Measurements

Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.

JetStream Installation Bracket

Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).

Channel-Mounted and Clamp-On Accessories

JetStream SmartFill Rubber Strips

JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.

JetStream Clamp-On Accessories

You can also attach most universal, clamp-on accessories and carriers to the bars.

Maximum Cargo Carrying Capacity

Full Length JetStream Crossbars

The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.

8000430 Yakima Jet Stream Cross Bars - Aluminum - 70" Long - Qty 2 - Silver

Item # Y00430

BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4
part number: Y00146

Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.


  • 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
    • Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
  • Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
  • Pivoting bases can be adjusted during installation to ensure towers are seated correctly
  • Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
    • Also fit RoundBar crossbars with adapter
  • Safe and easy installation with DropHook system and included torque tool
    • DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
    • BaseClips attach to hooks in tower assemblies and tighten for a secure grip
    • Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
  • Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
  • Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction


  • Maximum tower load capacity: 220 lbs
  • Limited lifetime warranty

BaseLine Towers

The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .

Versatile BarBed

Versatile BaseLine BarBed

The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.

CoreBar CrossbarJetStream Crossbar

The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.

RoundBar CrossbarRoundBar Adapter

The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.

Included Torque Tool

The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.

Adjustable Pitch and Toe Angle

BaseLine Pitch and Toe Diagram

The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.

Secure Installation with DropHook System

BaseLine DropHook System

The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.

Same Key System Locks

4 Pack SKS Lock Cores

BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.

8000146 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4

Replaces 8000124

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
part number: Y79QR

These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.


  • Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
  • Padded, stainless steel clips provide secure grip on your door jambs
    • Snap onto DropHooks inside towers
    • Protect door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded rubber pads fit the contours of your roof
    • Clip onto bottoms of towers
    • Protect roof from scratches and abrasions


  • Quantity: 2 clips and pads
  • Limited lifetime warranty

DropHook System Installation

BaseLine and BaseClip

Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.

Installed BaseLine and BaseClip

The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.

Molded-Rubber Pads

The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.

8006200 Custom Base Clips and Pads for Yakima Base Line Towers

Video of Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Yakima Roof Rack Installation - 2020 Ford F-150

Zach: Hey guys, Zach here at Today, we're going to be taking a look at the Yakima JetStream Crossbars on our 2020 Ford F-150. These are going to be an excellent way to get some gear on top of your roof, whether it's a bike rack or a cargo basket, maybe you're looking to add some extension to a ladder rack system. They have a weight capacity of 165 pounds. Now, that's while you're moving. So if you wanted to put a tent up here as well, it would also work out great for that.

We have the bars here in black, but they're also available in silver, if you're looking for something to maybe closely match your vehicle.The bars are going to have a really nice aluminum construction. They have a really nice aerodynamic design, so it's going to cut down on wind noise and drag. Some of the older systems like the square bars or even round bars, those we're really effective at carrying stuff, but they we're noisy. You had to get a fairing. You can get a fairing for this, but I think this design is going to be much quieter.

Anytime you put something on the roof, though, it's definitely going to be more noticeable. Regardless of how aerodynamic it is, it's going to make noise. But I also like that on the T-Track here, if you have T-Track accessories, the weather strip in the top, you can just push that down to fit your accessory down in there and tighten it. You don't have to pop the cap off and slide it all the way through and trim the piece like some of the other ones out there. That's a really nice design.And then these bars are going to be 60 inches that we have on here today.

You can go a little further out, but don't exceed the overall width of your vehicle when it comes to your mirrors. But the longer you go out, the higher chance you are of bumping your head. And that's definitely a real thing. I've done it. And it does not feel good whenever you hit your head on those.

So I think the 60-inch is a good fit with this one here today. And then the way they attach to the vehicle is through the baseline tower, which attaches to our fit kit here or the base clip. And this is what makes it specific for the F-150 and everything that touches the vehicle is going to have a rubber coating on it. So this clip's metal, it's going to have rubber coating on it inside to not harm the finish of your vehicle. And when it comes to how these fit down in your door jamb here, it's going to hit up against that seal there. You can see it just goes right around it.And that is pretty normal for any bare roofs to have this style design there. So that is a really secure way to have those on there. On the towers here, they have these little plastic knockouts here, and you can replace that with the same key system that Yakima offers. That way you can tie it into your Yakima accessories, so you can have one key. I personally don't think that you're going to have very many issues with people trying to make away with these. You're going to need a special tool that comes with it to get all this stuff loosened up. But just to give you a little bit more peace of mind, you can easily install those locks. When it comes to the overall shape of these bars, they're pretty universal. A lot of bars are going to look very similar to this. So it's going to work out with most accessories out there, especially Yakima branded ones, but something to be mindful of is how much it adds to your roof.I'm going to give you a couple measurements to show you if you have any sunroofs or if you have any clearance issues getting into a garage. And I'm going to go from the top of our corrugation on our roof to the lowest point of our bars. That's about two and three quarters and the top is about three and three quarters. So definitely be mindful of that. But overall, these are really good bars. The installation is a little bit more involved than others, but they're not too difficult to put on. You're only probably going to do it one time. You're going to leave them on all the time. They have very detailed instructions. So let's just walk you through how we got these put on. We went ahead and we put the front bar on. This second bar is going to install the same way.The measurements are just going to be a little different depending on where you need to put that on the vehicle, but this is everything that's going to come in the kit. So you're going to have your bar, two towers, part of your fit kit here. We've got one installed on that already. That allows it to conform to the vehicle and fit this one proper. Two end caps for the bar here, a tightening tool and two end caps for each tower. And it's going to be the same way with that front one. So what we can do is we can flip our bar over and you'll see this track that runs on the inside. That's where we're going to install our towers. So we can take our tower and there's going to be this silver piece right here. And we'll just slide it into that, that slot.See, it's a little tight. They may come a little tight out of the box, so we can take our tool and we can loosen that up. Now, you would think that this is what you need to loosen up to allow this to move, but what that does is that causes the pitch here to change. And this actually is just right where we need it to be out of the box. Different vehicles would require you to adjust that. So we're not going to adjust that today, but that little slot right there is what we need to open up. We can come to this side of the tower, pull this out, and you can feel it click into place and it opens up.And you can see that little bolt down there. I'm going to take the tool, loosen that just a little bit. And I'm going to slide this in to the spot that I need. Now, your instructions will tell you where this needs to mount. And there is a little ruler here. It's really hard to see, especially on camera there, but it's just integrated into the bar and it's on each side. It tells us exactly where we need to line that tower up. We'll get that lined up and then we can tighten that down. And when we're tightening this down, we're going to get an audible click. And that tells us we have this torqued down properly.Just like a gas cap. So we know we don't need to go any tighter than that. We can close that little door that we just opened up. So our other tower, we'll install the same way. And I already had this pre-installed. This is part of the fit kit that fits the F-150. So you're going to have this plastic piece here and the rubber coated one, the rubber piece that actually touches the paint on the vehicle. So you can see this fits only one way and we'll just snap that in place. And then once we get that on, we can put it on our tower here. And you can see this little slot right here, it's going to hook in right there. And this little groove right here, we want that facing on the outside of the vehicle. So this is the outside of the tower and that just clicks in place. And then we can slide this on the same exact way and tighten it down and it'll be the same measurement on this side.The next thing we need to do is we need to put our end caps on our bars. They go on a very specific way. This little slot right here goes on top and then just fits right in there. And that just provides a nice clean way to make that look finished. So then we can get our bar prepped to put on top of our truck. I've got a general idea where this is going to go, but we're definitely going to measure this out. And those feet, that rubber pad that we installed is going to fit right in this gutter. And it's going to sit flush right up against this, and it should be that way on both sides. And that's why that measurement that they give you in the instructions is super important to make sure you follow that. Now, before we put our clamps on, we need to measure this out because we need to make sure that this sits even. So we're going to measure center of the front bar to the center of this back bar. And we're going to set that at 32 inches here.And then once we get that set, we're going to go to the other side and make sure it's the same, and then we'll just double check back over here and make sure we didn't make any adjustments. And then the measurement for the front cross bar, since we already had this one in place, we're going to measure that from the front of this tower here to right about here. Now we can finally get our clamp in place. So we'll pull up on that door, we'll get this piece right here and we need to have this little hook there facing down, but we're going to pull up on that and slide our clamp in and allow that to catch. So we're going to do that on both sides and you can see how our clamp is kind of floating here and that's to . they have it built into this tower to adjust that for different types of vehicles because this tower works with several different cars. It's this clamp and this piece right here that make it fit the F-150 specifically.So the way we adjust that so it sits a little closer to the vehicle, is we can take our tightening tool and we can tighten that up. And that just brings it down where it makes contact with our vehicle. That's pretty good right there. We're going to do the same thing on the other side. When we're tightening these clamps down, we don't want to tighten one down before we do the other. We kind of want to go back and forth and be even with it, so we don't pull the crossbar one way or the other, so it sits nice and even on our truck. So once we get both sides touching, we can just go back and forth, get that tightened down. You can see our tower's just compressing there. We're getting a nice fit. Just tighten it a little bit, go to the other side and do the same thing.Once we get those pretty close, we can just finish them off and we're going to get that same clicking noise we got earlier once we have those torqued down all the way. Then we can close that door right there. And then we can take our cap here and it hooks right into there. So just put it like that, snap it in place. Then we can go do the same thing on the other side, but once we get both sides done, we're going to be able to get our accessories loaded up and be ready to go. But that's going to do it for our look at the Yakima JetStream Crossbars System on our 2020 Ford F-150.

Customer Reviews

Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2 - Y00430

BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 - Y00146

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y79QR

Average Customer Rating:  4.8 out of 5 stars   (1069 Customer Reviews)

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.

by: Tyler07/29/2021

I really like the look. These are quieter than the square bars with a fairing in my other pickup. I like the way the brackets fit the molding and don’t interfere with the rubber seal. I was able to put the bars anywhere I wanted, and I did not follow the recommended front to back placement so it would better fit my cartop carrier box and work for a canoe with my goalpost in the hitch receiver.

I was disappointed that one of the plastic caps fell off the end. I had to order a replacement at my cost.
Tyler - 07/30/2022

by: Chris05/15/2022
Ford Edge

Awesome rack system!!! Glass top Edge went from KC to Crystal River FL. With two bote boards loaded on. #1 be sure to check the torque on the clamps randomly per the instructions.
They didn't loosen much but one did a bit.

by: Stephen07/07/2020

I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.

I am still very pleased with the rack. Initially I had I am very pleased with the rack system. Kayaks have traveled long distances over road to my destinations without any problems.
Stephen - 07/08/2021

by: George 08/19/2021

Already have the rack on my truck. Can’t wait to load my kayak on. etrailer was excellent to deal with.

The rack is easy to put on and take off,is very sturdy, and looks good on my truck. Very pleased with the purchase and with etrailer.
George - 08/20/2022

by: Richard04/10/2022

I find it unbelievable that I order the Yakima Baseline Towers and etrailer sent me a set of towers that had been previously returned by someone else. The towers came in the shipping box that everything else came in, basically tossed in. You could tell they had been returned because each tower had screwdriver marks on it because the previous owner couldn’t get the covers off and attempted to pry them off. I’m assuming they got frustrated and just send them back damaged.
When I buy something “New” I expect it to be new, in it’s original box -> and I would like to be the one to damage them.
Very disappointed in etrailer for charging me full price and pawning off damaged goods.

I will have our Customer Service team reach out to you.
-- Etrailer Expert Jenny N - 04/18/2022

by: Emma S.06/27/2020

I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.

It’s been working great this last year! I have not had any issues with it.
Emma S - 06/29/2021

by: Patrick06/26/2022
2022 Chevrolet Silverado 1500 LTD

George J.
Like to say thank you .
The roof rack for my 2022 trail boss looks great. And Yakima roof racks has a VERY good product .
I would have given you guys more stars if I could.
Shipping Time , boxing of the product and the way everything went together was
A #1. Easy and fast.
Also, removal just as fast.
Thanks again.

by: John 07/27/2022

Great order agent who made sure I would receive everything needed for my new Yakima equipment. Order arrived a day late, but etrailer can’t be held accountable for the package getting held up along the way. Very satisfied…thank you Adam.

by: Doug06/07/2022

etrailer came through with speed and quality. A couple of other websites that I looked at could not supply all the needed equipment ("on backorder") in a timely manner. As you know, getting "most" of the roof rack is the same as getting "none" of the rack. So I was very pleased to see that etrailer could send me everything quickly. It is exactly what I needed.

by: Alice08/01/2021

etrailer had what I needed for my Yakima baseline rack when everyone else was sold out and on backorder for MONTHS. They followed up with an email when it was shipped out as well as when it was delivered. I will definitely buy from them again.

by: Jacob08/01/2021

Baseline towers are designed really well and the adjustability to fit almost any naked roof is really impressive. I would have given them five starts but the hand-held hex torque driver seemed to fit some of the adjustment hardware better than others even in the same base tower. It started to slip inside one of the hex bolts, so I tightened really slowly and gradually and that made the torque clicking not work. Ultimately, I over-tightened one of the towers and it started to flex the door jam sightly. If it’s available, I recommend using your own torque wrench with the correct allen bit/extension.

by: Paul02/08/2021
Ram 2500

The rack looks solid. It’s the perfect fit for my 2020 Ford Ranger. I’m so glad I waited for a back ordered item because the 50 inch bars are a much better fit than the 53” bars on the Thule kit. My only complaint is that the fit guide was not accurate on the Yakima website. The suggested placement of the baseline towers was at least 3/4 inch off on the front bar and 1/2 inch off on the rear bar. Not a big deal unless you’re upset with the cut rubber insert that is placed inside the bar rail before you place the bars on the vehicle for attachment. That’s if you follow each step in the directions. If I were to do it again, I would have place led the bars on the vehicle before cutting the rubber stripping. The bars sit quite high off the roof. Not terribly high, but higher than the Rhino Vortex 2500 I had on my Ford Focus ST. Quality of bar seems good, but quality on cap on baseline towers seemed a bit cheap and figment wasn’t crisp. I found myself wondering if I should have purchased a lock set with the order just to be certain the caps on the baseline towers doesn’t fall off. I don’t think any of these kits are worth the $500 price tag. They’re worth no more than $200. Can’t believe these companies expect consumers to purchase $500 bars every time they upgrade their vehicle, especially all the leasees out there. If I had to buy again I would look for the Rhino Rack. Quality is just as good if not better, and the price is a bit cheaper. They just don’t have a setup for my 2020 Ranger.

by: Christopher08/16/2022

cross bars work great, but ordering was an other issue. When I looked for this product online I was told that the front towers were on back order for about 6 months. So I called to make sure that was right seeing that 6 months is a long time. When I called I was told that the kit was in fact in stock so I placed the order. When the package came I had 4 rear towers and two cross bars. So infact the internet was right, so I returned them and ordered the right towers from rack attack were they new that my cars roof. Customer sevice was great I just wish the tech that I placed my order with knew that 4 rear towers where not going to fit right.

by: Jeffrey06/02/2022

Everything was perfect and relatively easy to setup. Ì bought from etrailer due to the actual manufacturer being out of stock, I was skeptical when I ordered but very glad I did. Would 100% recommend etrailer.

by: Earl07/28/2022

Yakima towers and crossbars were solid and easy to install with the very well written instructions. We used them on 2 cross country trips with any loosening. They were easy to remove. We plan to use them again as the need arises.

by: Matthew01/20/2022

I only received a small portion of my order and was told that the entire order was delivered. When I notified etrailer they asked me why I would have signed off on delivery if I didn't receive the full order - I had only signed off for one item and had to provide photos and scans of the delivery slip to explain this to them. When I asked for the balance of my order I was told that it would take an additional 6 months of waiting to receive them. Don't take them at their word, don't trust customer service, don't trust their timelines. Will never order from them again and I will update this review if the balance of my order arrives in late May (6 months later than promised at the time of order).

I will have our customer service team reach out to you.
-- Etrailer Expert Jenny N - 01/21/2022

by: Robert07/13/2021

The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.

by: KS02/01/2022

The towers have worked well, though the cover on one of the baseline towers popped off while I was driving. I luckily recovered it from the side of the road. It probably became loose while strapping down our kayaks. Users should be attentive to this possibility when mounting gear.

by: Bacon04/02/2020

I though I would love the core bar set up on my truck but I have really grown to love them! Weather it’s bikes, kayaks or a ladder it works great! And even better it looks great! Quieter than Thule square bars and Yakima round bars by far. I would not only buy again but one of the bars was damaged in shipment and etrailer took care of it by sending a new one to replace it right away. Will be buying from them again! Good customer service!!!!

by: Alex11/05/2018

Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked.

by: David02/24/2022

Approx 8 month delay getting order.
end cap has fallen off - I expected better from Yakima for the price.

We do have the end caps available as a replacement part. It is part # 8880640
Replacement Endcaps for Yakima CoreBar Crossbars - Qty 2
-- Etrailer Expert Jenny N - 03/03/2022

by: D White06/20/2018

Ordered new towers so as to use my old-school round bars (I bought these at least 18 years ago, maybe even earlier) and bike and canoe accessories on a new vehicle (naked roof 2018 CR-V). Installation was tedious, as usual, but not difficult and the written instructions were straightforward. Youtube helpful too but not necessary. Have hauled bikes and the canoe in high wind on the interstate (no more than 65 mph though) on the CR-V and so far so good. Have had excellent results with Yakima racks on 3 vehicles now (2 sedans and now the CR-V) over last 28 yrs. This is my first purchase through etrailer. Very pleased. Good price, excellent service online and via phone, rapid delivery. Highly recommend.

by: Frank 09/30/2022

Description, instructions and quality excellent. Very stable and aerodynamic, tested on a couple of road trips! I fully recommend these products

by: Sara12/30/2021

Getting a roof rack that fit my hyundai perfectly was a challenge but this worked! The setup is kind of complicated, and one of my plastic covers actually flew off in my first drive, but it still works well and is now easy to set up (once you do it the first time)!

by: John P.08/29/2018
2017 Volkswagen Golf

Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on. shipped these out quickly and all parts arrived without damage.

Show More Reviews

Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?

  • Recommended Roof Rack for 2019 Kia Sorento with Naked Roof
  • We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part # Y00425 for the two 50" JetStream Crossbars in Black, # Y00146 for the BaseLine Towers, # Y06159 for the Front BaseClip Fit Kit, and # Y06170 for the Rear BaseClip Fit Kit. This is going to provide you with an extremely sleek rack that will be really quiet on the road due to the aerodynamic
    view full answer...

  • What Lock Cores Fit Yakima BaseLine Towers
  • We do! The lock kit you need for the Yakima BaseLine Towers # Y00146 can be found on our site as part # Y07204. This kit comes with 4 matching lock cores, 2 keys, and the change key needed to remove and install the cores.
    view full answer...

  • Yakima Roof Rack Kit for 2022 Toyota Corolla
  • I have a great roof rack setup for your 2022 Toyota Corolla. It is made by Yakima and includes crossbars, feet, baseclips, and lock cores. Yakima JetStream Crossbars item # Y00425 are extremely quiet, aerodynamic crossbars that attach to Yakima towers to create a stylish roof rack for your Toyota Corolla. The rubber strips in T-slots push down to load carriers or accessories - with no need to trim. The full-length aluminum bars maximize the carrying capacity of 165 lbs. BaseLine
    view full answer...

  • BaseClip Fit Kit for a Yakima Roof Rack on a 2022 Ford F-150
  • I would be happy to help you. To attach the BaseLine Towers for Yakima Crossbars item # Y00146 to your 2022 Ford F-150 naked roof you will need the following parts: HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y27FR The correct crossbars are item # Y01157.
    view full answer...

  • Can I Use My Old Yakima RoundBars On My 2017 Chevrolet Colorado
  • There is a solution for you that will allow you to still use Yakima round bars, if you have them. Unfortunately, since the Q-Towers have been discontinued and the new system is not backwards compatible, you will need new towers, a fit kit, and round bar adapters. This is what you need for your 2017 Chevrolet Colorado. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y00146 RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part
    view full answer...

  • Best Roof Rack for 2020 Ford Escape with Naked Roof
  • The best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek. The roof rack for your '20 Escape is made up of: - Yakima JetStream Crossbars # Y00426 (Black) - BaseLine Towers for Yakima Crossbars # Y00146 - BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152 - Same Key System Lock Cores (Optional) # Y07204 The aero shape
    view full answer...

  • Recommended Roof Rack For 2017 GMC Terrain SLE
  • We do have a roof rack to fit your 2017 GMC Terrain with a naked roof. I suggest the Aerobars for better aerodynamics and less noise. For this system, I recommend the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425, the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y00146, the RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06146. This will give you a complete
    view full answer...

  • Roof Rack and Kayak Carrier for a 2017 Ford F-150 with Panoramic Roof
  • Yakima has a roof rack option that will fit models of the 2017 Ford F-150 that have the panoramic roof. Keep in mind though they state not to open a sunroof or panoramic roof because they may interfere with some accessories. If you have a Super Crew Cab or SuperCab you can use bars # Y00426, BaseLine towers # Y00146, and 2 sets of clips # Y06122. There isn't an option for the regular cab (if the panoramic roof was even an option for the regular cab models). A popular kayak carrier
    view full answer...

  • Yakima Q-Clips for a 2009 Toyota Tacoma Double Cab
  • Thanks for sending us a picture! The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y00146, # Y03536, # Y06125 and # Y06128.
    view full answer...

  • Lock Core and Key Kit for Yakima BaseLine Tower Roof Rack on 2015 Volkswagen Golf TDI
  • For your 2015 Volkswagen Golf TDI with a Yakima BaseLine tower roof rack installed you can use their lock core kit # Y07204. This set includes 4 lock cores, two standard keys and the control key you will use to install the cores in your BaseLine towers # Y00146. Please refer to the two linked videos for more on this kit and how to install it.
    view full answer...

  • Best Roof Rack for 2020 Toyota Highlander with Naked Roof
  • If this were my 2020 Toyota Highlander the roof rack I would put on it would be Yakima because it will give you a larger amount of crossbar space than most racks so you can hold the most gear, it is extremely quiet, highly durable and looks fantastic. The rack that fits your 2020 Toyota Highlander with a naked roof is made up of the following parts: - Yakima JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y00146 - BaseClip Fit Kit # Y06153 and # Y06132 - Same
    view full answer...

  • Recommended Yakima Clips For 2016 Honda Civic 4 Door
  • I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle. However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y00146 with RoundBar adapter # Y03536. You can use the
    view full answer...

  • Roof Rack Recommendation for 2019 Volkswagen Jetta with Panoramic Sunroof
  • I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof. For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y00146 and you'd be set.
    view full answer...

  • Yakima Roof Rack System Clips for a 2015 Toyota RAV4
  • To fit any current generation Yakima system to a 2015 Toyota RAV4, you'll need the following kit: 4 pack Yakima BaseLine Towers for Yakima crossbars, part # Y00146 Yakima Base Clip 180, part # Y06180 Yakima Base Clip 169, part # Y06169 You may also need the SL Round Bar adapters, part # Y03536 if you have round bars. There is not a Q-Tower kit available for this vehicle.
    view full answer...

  • Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  • There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've
    view full answer...

  • Q Clip Recommendation for Installing Yakima Roof Rack on 2014 Volkswagen Passat
  • The Q clips you'd need are no longer available from the manufacturer. To utilize your Yakima bars you would need to upgrade the rack with the following: Round Bar Adapter # Y03536 BaseLine towers # Y00146 BaseClip # Y06195 and # Y06196
    view full answer...

  • Recommended Roof Rack for 2004 Honda Civic Coupe
  • We have several roof racks confirmed to fit your 2004 Honda Civic coupe, but there are no Rhino Rack roof racks among them. I have included a link to all the roof racks confirmed to fit your vehicle. You can then filter them by bar type, brand, color, etc. I recommend going with the Yakima Round Crossbars Roof Rack which includes the following parts: 48 inch CrossBars # Y00408 BaseLine Towers # Y00146 RoundBar SL Adapter # Y03536 Fit Kits # Y06162 and # Y06159 Check out
    view full answer...

  • How do I Install a Set of Yakima Cross Bars onto a 2017 Toyota Tacoma Access Cab?
  • In order to mount a set of Yakima Round Bars onto a 2017 Toyota Tacoma, you'll need the following clips and tower pieces: BaseLine Towers for Yakima Crossbars - Naked Roofs, part # Y00146 RoundBar SL Adapter for Yakima BaseLine Towers - part # Y03536 2x Base Clip Fit Kit for Yakima BaseLine Roof Rack Towers Qty 2- Part # Y06145 Note that you will need TWO (2) of the Clip Fit Kit, part # Y06145 in order to complete this installation. I've included a video of this installation
    view full answer...

  • Is There a Replacement For Yakima Base Clip 200
  • I can do you one better, and instead of an exact match, I can get you the Yakima Base Clip 200, which is the following part number: - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y79QR I did verify directly with Yakima that this is the Base Clip 200.
    view full answer...

  • How Many Crossbars Does a Yakima Fit Kit Work With
  • You are correct the Yakima Fit Kits like part # Y79QR are sold in pairs or a single crossbar. So to do a setup that includes both crossbars you'd need a quantity of 2 fit kits.
    view full answer...

  • Can I Get The Yakima BaseClip 200
  • Yes, we do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y79QR. These are the BaseClip 200 that will fit your 2001 Ford F-250 Super Duty. I have included a product description link below.
    view full answer...

Info for these parts were:

Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Edited by:
Wilson B
Employee Matthew E
Written by:
Matthew E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Ford F-450 Super Duty Accessories

Product Experts Available Now!
Call 1-833-496-1390