2000 Mitsubishi Montero Sport Roof Rack by Yakima
Roof Rack Includes:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
Part Numbers: Y00425,Y00221
Our Price: $413.85
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2
part number: Y00425
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Specs:
- Quantity: 2 crossbars
- Crossbar weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 50" long x 2-3/4" wide x 1-1/8" tall
- T-slot dimensions: 7/8" wide x 7/16" tall
- T-slot top opening: 7/16"
- Underbar slot: Full length
- Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
Item # Y00425
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
part number: Y00221
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.
Features:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Specs:
- Quantity: 4 pads
- Lifetime warranty
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 - Y00425
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 - Y00221
Average Customer Rating: 4.8 out of 5 stars (658 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.by: See11/03/2022
with so many variables having someone that could sort through all them was very helpful Thanks etrailer
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
Doug
2/18/2023
Ive had the rail system on my truck for about a year now and its been a tremendous help. It allows me to still use my bed and provides much needed extra storage space, mostly for all the dog items we carrycrates, gates, beds, food, etc. I like the fact the rail locks to the truck so I dont need to remove them at home or at our destination.
by: Nelson06/26/2023
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: John11/16/2023
2015 Mazda 3
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: Oliver05/30/2021
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
by: Angela04/08/2021
Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.
by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: Alexander12/11/2017
Jeep Cherokee
Super solid rack and the only one that fits the Jeep Cherokee without rails well and looks good too. Easy to install and worth the price
by: Stephen07/07/2020
2019 Hyundai Santa Fe
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
by: Joshua09/05/2019
Amazing quality easy set up fast shipping buy the locks the 4 pack With this fast shipping super impressed
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: Jacob08/01/2021
Really well made, great fitment, a little complicated instructions, but perfect install when they’re followed closely.
by: Barry09/29/2022
the product was exceptional. I would recommend it to anyone, who has a vehicle with a naked roof. It is a solid as a factory installed rack. Josh went out of his way to get me a replacement torque screw driver because the first one from Yakima was working properly.
by: Ernesto07/23/2022
Well you asked for it so;
I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack
by: Jerry 07/29/2023
I have ordered several times from Etrailer and have always received efficient, timely and reasonable shipped items. Did not use customer service with this order but it has always been good.
by: Aaron 02/10/2024
Perfect match
by: Ric 07/22/2023
Honestly went back to etrailer after buying something i couldnt find on the big A before because their support was so good and delivery speed was soo fast.
by: Aidan08/19/2023
Great bars and easy installation on my 2012 Prius C
25
622
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Roof Rack or Truck Bed Rack for 2022 Toyota Tacoma Double Cab
- For your 2022 Toyota Double Cab you could go with a Thule roof rack like the Wingbar Evo # TH711420, # TH710501, and # TH145107 to carry your bikes with a bike rack, or you could go with the bed rack option from Yakima the BedRock HD # Y01160-58 if you preferred to carry them there. I like the bed option because you won't have to lift your bikes as high and the bikes would be shielded slightly from the wind behind the cab. If your truck bed is clear this would be what I would go with.
If
view full answer... - Recommended Roof Rack for a 2023 Kia Sorento with Raised Side Rails
- The Yakima JetStream Crossbar System composed of part # Y00425 and part # Y33TR is an excellent option for a 2023 Kia Sorento with raised side rails. This system has aero shaped crossbars for the best wind resistance and t-slots for use with channel mounted accessories. The crossbars can be adjusted front to back for your accessories. The only thing it does not have that you were looking for is locks but you can add these using the Yakima Same Key System part # Y07204.
view full answer... - Recommended Roof Rack for a 2023 Acura MDX w/ Flush Side Rails
- To add a set of Yakima Jetstream crossbars to the raised rails on the roof of your 2023 Acura MDX you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item
view full answer... - What Roof Rack do You Recommend for My 2022 RAV4 with Flush Factory Rails?
- For the best and most popular roof rack we carry for your 2022 Toyota RAV4 with flush rails, I recommend the following setup:
- Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails # Y53TR
- Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR
- Yakima Same-Key System Locks # Y07204
The great thing about the JetStream crossbars is that it is an extremely aerodynamic system that reduces wind
view full answer... - Roof Rack for a 2022 Lexus RX 350 with Factory Flush Mounted Rails
- The roof rack that I recommend for your 2022 Lexus RX 350 with flush mounted rails is the 2022 Lexus RX 350 Roof Rack by Yakima. This consists of the Yakima JetStream Crossbars # Y00425, RidgeLine Towers for Yakima Crossbars # Y00145 and the RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers # Y06027. This will provide you with everything that is needed to have a roof rack on your 2022 Lexus RX 350 to use channel and clamp mounted accessories.
You can add the Yakima Same Key System
view full answer... - Recommended Roof Rack for a 2022 Kia Telluride with Factory Flush Mounted Rails
- For your 2022 Kia Telluride with flushed mounted rails I recommend the 2022 Kia Telluride Roof Rack by Yakima. This rack consists of:
- Yakima JetStream Crossbars # Y00425
- SightLine Towers for Yakima Crossbars # Y64AR
- SightClip Fit Kit for Yakima SightLine Roof Rack Towers # Y34UR
This will provide you everything you need to get a roof rack on your 2022 Kia Telluride to use channel and clamp mounted accessories. You can lock the roof rack to your roof using the Yakima Same Key
view full answer... - Can Longer Yakima Crossbars be Used on 2023 Honda HR-V For Thule Hullavator
- You can definitely use longer Yakima crossbars on your 2023 Honda HR-V for the Thule Hullavator Pro # TH898, but don't go all the way to the 70 inch # Y00427, as these are 20 inches longer than the recommended # Y00425 and will stick out way too much on your HR-V. So instead use the 60 inch Yakima JetStream Crossbars # Y00426.
Then to complete the rack set up on your '23 HR-V you do have the right parts with the BaseLine Towers # Y28TR, and Fit Kits # Y06159 & # Y06181.
In regards
view full answer... - Does the Rhino-Rack 2500 Roof Rack # DS118B Fit My 2013 GMC Terrain?
- From your recent searches, it looks like you are asking for the compatibility of the Rhino-Rack 2500 Roof Rack - Square Crossbars - Naked Roofs or Fixed Mounting Points - 46" Long on your GMC Terrain. Unfortunately, this roof rack does not fit your vehicle.
With that being said, we do have some great compatible roof rack systems that do fit. The fitment that you need depends on if your vehicle has a bare roof or raised factory rails.
If you have bare roof on your 2013 GMC Terrain,
view full answer... - Will the Thule AeroBlade Edge Crossbars Fit My 2019 Lexus GX 460 with Flush Rails?
- I have a great alternative for you. Unfortunately, the Thule AeroBlade Edge Crossbars will not fit your flush rails of your 2019 GX 460. However, if you are looking for a roof rack system that sits higher, I recommend the following roof rack setup:
- Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425
- SkyLine Towers # Y00148
- Landing Pad 30 # Y25ZR
- Yakima Same-Key Lock Cores # Y07204
This roof rack system sits about 4 inches from the top of your roof
view full answer... - Roof Rack for 2017 Subaru Impreza Sedan with Naked Roof
- Yakima does have their Jetstream roof rack that fits your 2017 Subaru Impreza with a naked roof with the part numbers # Y00425, # Y53TR, and # Y00233 which is a super high quality roof rack that's easy to install and quiet but we also have other options like the Inno part # INXB123-130, # INXS350, and # INTR145.
We have a few others two that you can check out at the link I attached to this page.
view full answer... - Roof Rack Recommendation for 2012 Hyundai Santa Fe with Flush Rails
- Sounds like you need the Yakima roof rack consisting of:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
SkyLine Towers # Y53TR
Landing Pad 20 # Y00246
I did some checking with them and they fit this rack to a Santa Fe like yours that has the flush mounted railings you described. The landing pads are made specifically for the fixed mounting points in your factory flush rails.
view full answer... - Best Roof Rack Recommendation for a 2019 Toyota Highlander
- The Yakima JetStream Crossbars # Y00425 (black) will give you the peace and quiet and aerodynamic wind resistance you need. My research on your 2019 Toyota Highlander revealed that your vehicle has either flush factory rails or naked roofs.
On your naked roof, in addition to the bars, you will need:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 (you will need to order two sets of these)
For mounting
view full answer... - 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
- I'd be more than happy to help out!
The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following:
50" JetStream Crossbars - # Y00425
SkyLine Towers - # Y53TR
Landing Pad 19 - # Y00245
Lock Core Kit - # Y07204 (optional)
This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - Roof Rack for a 2020 Kia Soul X-Line with Flush Side Rails on Roof
- Yakima has a roof rack that fits the flush rails of your 2020 Kia Soul X-Line with the Jet Stream rack part numbers # Y00425, # Y00145, and # Y44FR that you referenced. This does not attach to the mounting points you mentioned but does clamp to the flush rails like you see in the picture I attached.
view full answer... - Roof Rack and Cargo Box Recommendation for a 2020 BMW X3
- We have the perfect roof rack and cargo box solution for your 2020 BMW X3 from Yakima! I recommend their JetStream crossbar roof rack because it features 50" Aluminum Bars, Black # Y00425, along with the RidgeLine Feet # Y00145 and the Fit Kit # Y06031 which are adjustable so they are able to match the contour of your roof better than other roof rack options.
Then for a roof box you are actually able to use any of the linked Yakima options as they will still allow you full access to
view full answer... - Recommended Roof Rack System For Roof Top Tent On 2014 Toyota Prius c
- For your 2014 Toyota Prius c I recommend the Yakima Baseline Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, BaseLine Towers for Yakima Crossbars # Y28TR, BaseClip Fit Kit # Y06135, and BaseClip Fit Kit # Y06179 as long as you do not have a glass roof or a sunroof. This system offers a 165lb weight capacity, and will give you 50" of useable crossbar space.
If your Prius c does have a glass roof or sunroof, I recommend the Rhino-Rack Aero Bar Roof Rack System which
view full answer... - Cross Bar Options And Kayak Carrier For A 2022 Hyundai Sonata
- We do have a couple of cross bar options for your 2022 Hyundai Sonata that will work great for you.
-First we have the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, the fit kit # Y06180 & # Y06153.
These are aerodynamic cross bars that measure 50" long, and have a maximum weight capacity of 165lbs.
-Next, we have the Yakima CoreBar Crossbars # Y00421, with the same towers # Y00146, and fit kits # Y06153 & # Y06180.
These cross bars
view full answer... - Roof Rack Recommendation for a 2013 Hyundai Sonata Hybrid with Panoramic Roof
- The roof rack I recommend for your 2013 Hyundai Sonata Hybrid is the Yakima JetStream which includes the following parts:
- 50" JetStream Crossbars # Y00425
- BaseLine Towers # Y28TR
- BaseClip Fit Kits # Y06144 and # Y06153
- Lock Core Kit # Y07204
This has been confirmed by Yakima to fit with the larger panoramic roof you have, and we actually shot an install video of this exact roof rack on a 2011 Sonata that I'm linking for you to reference.
If you let me know what you
view full answer... - Best Yakima Roof Rack For 2020 Jeep Grand Cherokee With Black and Chrome Track
- I recommend the Yakima JetStream Crossbars # Y00425 with the SkyLine Towers part # Y53TR and landing pads for the towers part # Y00244. The JetStream and CoreBar are very similar with a 165 lb capacity and aerodynamic design to cut down on wind noise. However, The JetStream bars offer the T-slot for accessories with a rubber weather strip that does not require trimming like it did in the past. I highly recommend using the JetStream bars with the T-Slot and getting the Yakima FatCat Ski
view full answer... - Will the Yakima Control Tower Roof Rack Fit on a 2005 GMC Envoy With Factory Tracks
- The Landing Pad, # Y00221, that you referenced will work with the existing tracks on your 2005 GMC Envoy. This landing pad is part of the Yakima Control Tower Roof Rack. You will also want to pick up the Round Crossbars, # Y00408, and the Control Towers, # Y8890027 (you will need 4). These additional items will complete the roof rack assembly for your vehicle.
You will not need to remove anything from your roof rack. I have attached a review video of this roof rack for you to check
view full answer... - Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
- I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the width of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
view full answer... - Replacement Base for Yakima Skyline Towers on Camper Shell
- It sounds like you already have the crossbars and feet and just need the bases. If that is the case, then you just need two of the Landing Pad 1 for Yakima Control Towers - Qty 2 # Y00221 which is a fit for the rails.
If that isn't the case, then the Yakima JetStream Truck Bed Rack for Tonneau Covers - Aluminum - 70" Long # Y00427-482104 will work to give you the complete kit for your rails.
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500
- You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following:
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- SkyLine Towers for Yakima Crossbars # Y53TR
Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then
view full answer... - Roof Rack for 2008 Fleetwood Niagara Pop Up Camper with Factory Track System
- I did some research on your 2008 Fleetwood Niagara Pop Up Camper and it appears that most of the major roof rack manufacturers (Thule/Yakima/Rhino-Rack) have systems that will work with the factory tracks you have on the roof of your popup camper. One of the most cost effective options we have for you is from Yakima in their round bar system. This system is composed of the fit kit part # Y00221(2), mounting feet part # Y8890027 (4), and crossbars part # Y8810027 (2). Please keep in mind
view full answer... - Adding Crossbars to an ARE Camper Shell with Tracks
- I believe your ARE camper shell has Yakima tracks installed but it doesn't really matter which brand you have as most of them will accept each others mounting feet. However, Yakima has the most cost effective option for you so I recommend using the landing pads part # Y00221 (2), control tower part # Y8890027 (4), and crossbars part # Y8810025 (2). The round crossbars are cut to fit. This is the most inexpensive option we have for you to add crossbars to your ARE camper shell.
view full answer... - Yakima Landing Pad 1 vs. Landing Pad 26
- The difference between the Yakima Landing Pad 1 # Y00221 and Landing Pad 26 # Y75ZR are what they fit.
The two come with different hardware and the Landing Pad 1 is mostly for some factory tracks as well as specific vehicles, while the Landing Pad 26 is for Yakima tracks. So the right one is really going to depend on what application you have.
view full answer... - What Parts Are Needed To Make Low-Profile Bed Rack System For 2022 Ford F-150 w/ RetraxPro Cover
- Looks like you are pretty much there!
The Landing pad 1 # Y00221, Skyline Towers # Y53TR, and 68" Yakima HD crossbars # Y01158 will all work perfectly with the RetraxPro XR rails on your 2022 Ford F-150.
This would be perfect for carrying bike racks with a rack like # TH598004-FB, or a platform like the # Y05045-39 but it would be pretty hard to carry kayaks or canoes with this style of rack as you would have a ton of overhang past the bed which is less than ideal.
For a kayak
view full answer... - Recommended RetraxPro XR Tonneau Cover and Crossbar Kit for a 2022 Ford F-250 Super Duty
- I would be happy to help you find a cross bar system and tonneau cover for your 2022 Ford F-250 with the 6-3/4' bed. There is not a round bar system though but I have two great options for you that will work with a tonneau cover.
The correct RetraxPro XR tonneau you will need for your F-250 is Item # RTT-80383. This cover has the built-in T-slots that let you mount your ladder rack or roof rack crossbars to the side rails.
If you are set on a Yakima system you will want the Yakima
view full answer... - Is the Mounting Hardware for the Landing Pads for Yakima Control Towers Part # Y00221 Included
- The mounting hardware that is needed to install the Landing Pads for Yakima Control Towers part # Y00221 is included therefore no additional purchase will be necessary. I have attached a photo that shows everything that is included in the kit above for you as well.
view full answer... - What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
- If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221.
For the tracks themselves, they come in 3 different sizes:
- Yakima 42" Tracks for Roof Racks # Y01126
- Yakima 54" Tracks for Roof Racks # Y26RR
- Yakima 60" Tracks for Roof Racks # Y01135
Since most
view full answer... - Roof Rack Option For 2016 Toyota 4Runner With Factory Rails
- The standard roof rack fits for your 2016 Toyota 4Runner are all designed for the factory raised rails, but since you said you were okay with drilling holes you could add a track system to your roof. You would use whichever length is right for your 4Runner, the Yakima 42" Tracks for Roof Racks # Y01126 or 54" Tracks # Y01127.
Then you'd just need the following:
- Yakima JetStream Crossbars # Y00425
- SkyLine Towers # Y53TR
- Landing Pad 1 # Y00221
You'd need a total of four
view full answer... - Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
- You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
view full answer... - Landing Pads, Control Towers, and Round Crossbars for Yakima Roof Rack Tracks on a Pop Up Camper
- Yes, if you use the Landing Pad 1 # Y00221 you will need to use Control Towers, # Y00214 (discontinued). This is a set of 4 feet so you will need to get 2 sets of the Landing Pads.
Pop up campers, while generally small, can still be wide. The widest Yakima bars are 86 inches, # Y00420. If you need a different length there are also 78 inch bars, # Y00411, 66 inch bars # Y00410, 58 inch bars # Y00409, and 48 inch bars # Y00408.
view full answer... - Yakima Round Bar Complete Roof Rack System With Tracks
- You can piece together a round bar system that is going to be similar to a Yakima roof rack with round bars and a track system. What you will need are the following parts:
- Yakima 54" Tracks for Roof Racks # Y01127
- Yakima Control Tower # Y8890027 (Quantity of 4)
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- Round 58" CrossBars for Yakima Roof Rack System # Y00409
OR Round 66" CrossBars for Yakima Roof Rack System # Y00410
This will give you a track-based
view full answer... - Yakima Roof Rack to Fit Truck Topper Tracks on 2005 Nissan Frontier
- Since you already have Yakima tracks on your topper you can complete the roof rack using Landing Pad 1, part # Y00221, with Control Towers, part # Y8890027, and round crossbars. You need two sets of the landing pad and four control towers.
Then choose your length of crossbar:
48 inch - # Y00408
58 inch - # Y00409
66 inch - # Y00410
78 inch - # Y00411
86 inch - # Y00420
view full answer... - Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1
- To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following:
- Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028
You'll need a quantity of two of the # Y8890028 for all four feet.
view full answer... - Roof Rack for Camper Shell and Roof of 2020 Chevy Silverado 1500
- You can then use the Yakima roof rack with landing pad 1 part # Y00221, two of the control towers # Y8890027, and the single crossbar # Y8810025.
Then for a single bar rack for the roof of your 2020 Chevy Silverado 1500 you'd want the part # RRVA150B, # RRRLKVAH, and # DK427H and you'd be set.
view full answer... - Roof Rack For 2005 Buick Rendezvous That Can be Transferred
- The only roof rack that can be transferred from your 2005 Buick Rendezvous to a different vehicle is one that uses vacuum cups to attach, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B.
Otherwise, roof racks are specific to each vehicle, so if you wanted a custom fit rack, the only option for your '05 Rendezvous is the following from Yakima:
- Yakima JetStream Crossbars # Y00426
- SkyLine Towers # Y53TR
- Landing Pad 1 # Y00221
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4
- The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer...
Info for these parts were:
Video Edited:
Zack K
Video Edited:
Dustin K
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Video by:
Joshua S
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
Installed by:
David F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ralph C.
11/6/2023
Great had a few Hic-Ups getting the correct set E-Trailer reps were all over it and got me going Great Company to work with