1984 Toyota Pickup Roof Rack by Yakima

Roof Rack Includes:

Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima 1A Raingutter Towers (QTY 4)

Part Numbers: Y00409,Y00101

Retail:$348.04
Our Price: $324.00
You Save: $24.04
This item qualifies for Free Shipping

In Stock
Yakima Roof Rack - Y00409
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos




Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
part number: Y00409

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Features:

  • Serve as backbone of your aftermarket roof-rack system
  • Provide stability to roof-mounted racks
  • Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
  • Fit all Yakima towers
  • Constructed from vinyl-coated, galvanized steel


Specs:

  • Quantity: 2
  • Capacity (depending on application):
    • 5 Bikes
    • Yakima SkyBox Pro 12, PowderHound and 1 bike
    • 2 Kayaks
    • 2 Bikes and Yakima BasketCase
    • 2 Kayaks on Yakima Kayak Stacker and 2 bikes
    • Yakima SkyBox Pro and 2 bikes
    • Yakima SkyBox Pro and kayak on HullRaiser
  • Dimensions: 1-1/8" diameter x 58" long
  • Steel wall: .085" thick
  • Lifetime warranty

NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).



8000409 Round 58" CrossBars for Yakima Roof Rack System (QTY 2)



Yakima 1A Raingutter Towers (QTY 4)
part number: Y00101

For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.

Features:

  • Clamp onto vehicle rain gutters
  • Provide base for Yakima roof-rack crossbars
  • Adjust to non-parallel rain gutters
  • Are lockable with Same Key System (SKS) Cores (sold separately)
    • Cores lock crossbars to towers and towers to vehicle roof
    • SKS Cores can be changed out to make all your Yakima locks keyed alike
  • Constructed from tough Zytel nylon


Specs:

  • Quantity: 4
  • Additional components required for a complete roof-rack system:
    • Crossbars (sold separately) to provide attachment point for accessories
  • SKS Cores required: 4
  • Height: 7-1/4"
    • Can be increased by 3-1/2" by 1A HiRise Spacers (Y01101), sold separately
  • Lifetime warranty


8000101 Yakima 1A Raingutter Towers (QTY 4)





Video of Round 58" CrossBars for Yakima Roof Rack System (QTY 2)

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Yakima Roof Rack Review - 2017 Jeep Wrangler Unlimited

Speaker 1: Today on our 2017 Jeep Wrangler Unlimited we're going to be test-fitting the Yakima RoundBar Roof Rack System. And this is going to consist of part numbers Y00410, this is going to be the 66" crossbars, and part number Y00101, and these are going to be the rain gutter towers that attach to your Jeep. The RoundBar Roof Rack System is a pretty decent roof rack system that can carry a wide variety of accessories, such as bike racks, cargo baskets, or cargo boxes on top of your Jeep, and freeing up space on the inside. While these bars are particularly sturdy, they are going to produce some noise while you drive. We do offer fairings that you can find on etrailer.com to help cut down that wind noise and drag as well.With the towers themselves, they simply clamp onto your existing rain gutters here and tighten down in place with these knobs here. At the ends, we do have this plastic knock out that can be taken out and replaced with the Yakima SKS Lock Cores so you can secure this to your roof but also make it keyed alike with the accessories you're hauling as well.

And those are sold separately also. How we got it into this position, we placed it onto the roof as you see here and then we took a measurement from the front windshield back a certain amount and made sure that it was even on both sides before we tightened things down. We also made sure that the crossbar overhang, how much this sticks out past the tower, was even on both sides as well.Let's go ahead and show you how the rear bar gets put together. We already have it partially assembled on our table here. And here you're going to find everything that comes with the kit once you've purchased it.

We have the crossbar here of course. We have our tower and pieces for the tower. As well as the two end caps for our bar itself. And a tightening tool to tighten the towers to the bar also. Your first step is you're going to loosen up the bolt on the inside here.

And it's kind of hard to see because of the clamps in the way. But this bolt here you'll loosen up by turning it to the left using our included tool. And that's going loosen it up enough to where you can slide this on to the end of our round bar here, like so.At this point, we're not ready to set it on the roof just yet because we are going to want to make sure we put on these rubber pads here to where it's going to make contact in the rain gutter. These just slide on. There we go.

All right, now we can slide it on there. And now we're ready to lift this onto our roof, being very careful as we do so. We'll scooch this up, set it in our rain gutter. And we'll do the same on the driver's side. Do some adjustments here to keep it as even as we can. And then we're going to take a couple of measurements here. That's going to be our crossbar spread from center to center and of course our overhang on both sides as well. You can use any measuring tool that you like. We're going to be using a flat tape today. This is just a little bit easier for us.As far as measurements go by here, you don't want to have it be under 24" because that would just not work with most after market accessories. What I usually do is I go by whatever accessory I'm hauling and go by its recommendations, as they usually have a pretty generous spread between the bars. That will give you a couple options to go by. And there we go. Open our doors here. The thing about these towers is you want to make sure they're as straight as possible. And we'll take that same tool and tighten down those bolts while holding that in place. This is going to take a little bit of time. Getting a ratchet wrench might also help with this as well, which you can get at any hardware store. However, that is a benefit with this roof rack system is it does come with all the tools necessary to tighten this down to your roof.All right. Now the final step here . double check that overhang. Okay, we're good. Now I can make sure that our clamp goes underneath here. And we'll take our end cap and start spinning. Turn until it's nice and tight, like so. Repeat this on the other side. Then we can put on our end cap. Now there's one thing I'd like to . a couple measurements I'd like to give you real quick. And this is going to give you an idea of how high these sit off the roof of your Jeep. It's going to be a measurement from the center of the roof to the bottom and top of the bars. From the center of the roof to the bottom of the bar is going to be about 4". From the center to the top is going to be about 5-1/8". That's more than enough space to put your accessories that wrap around the bar so it's not going to make contact on your roof or damage it. But it does still sit up pretty high. So when you have your bike racks and your cargo baskets fully loaded, just keep that in mind when you're pulling into your garage.Now the two bars combined do have a combine carrying capacity of 220 pounds. But you always want to double check with your vehicle's manual to make sure your roof can take those weights, and go by their recommendation. There you have it for the Yakima RoundBar Roof Rack System on our 2017 Jeep Wrangler Unlimited.



Customer Reviews

Round 58" CrossBars for Yakima Roof Rack System (QTY 2) - Y00409

Yakima 1A Raingutter Towers (QTY 4) - Y00101

Average Customer Rating:  4.8 out of 5 stars   (207 Customer Reviews)

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers. For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.

- Y00409
by: Joshua06/21/2019

website was extremely user friendly and customer service was even friendlier. Carol went out of her way to help me size my roof rack and make sure the specs were correct before shipping. Shipping was also very timely. 662191



- Y00409
by: George10/31/2017
2013 Ford Escape

Purchased the bars, clips & end caps for installation on my 2013 Ford Escape - shipping was very prompt and all items items were easily installed thanks to the helpful videos. Will definitely return to etrailer for any additional parts I need in the future 447624



- Y00409
by: Pat10/19/2018
Dodge Grand Caravan

Great buy for a great price. Really helped out from being in a bind. Easy to install and worked all the way from wyoming to wahington state in my dodge grand caravan. 575886



- Y00101
by: Al07/06/2018
1991 GMC Van

Installed as described on my van. 538703



- Y00101
by: Eric Petersen06/27/2015
1993 Volvo 240

Great product. Installed on my 93 Volvo 240 Wagon with ease. Delivery was super fast too. 207751


Comments
Still rocks by doing just as it should
Eric P - 06/26/2016

18964

- Y00409
by: Pat G08/29/2013

Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash. Will definitely be doing business with you all again. 97525



- Y00409
by: Ramon01/11/2019
2018 Jeep Renegade

The bars were prefect and allowed me to use my old Yakima low rider towers. I just had to cut the bars from 58 inches to 53 inches so I wouldn't have to much over hang. I used a hack saw, tape and a car hose camp. Old trick I learned, you use the hose camp as a guide for straight clean cut. 596799



- Y00101
by: Mike01/21/2019
2014 Ford Van

The customer service is exceptional. Nick went above and beyond getting the package out as well as dedicated follow-up. I will be ordering another roof rack for another vehicle. Even the return process was seamless thanks to Shelia. I ordered a tow hitch wiring harness a few months ago and received the same great service. Will continue to do business with etrailer. 599097



- Y00409
by: Stephen F.07/23/2019

Yakima Crossbars were as you would expect - steel bars coated in a soft black coating (be mindful when you are utilizing these with the top mounts as the clamp will eat through the soft coating when you tighten them down). I had issues with my yakima round bar setup as the brackets and tower system were allowing water to leak in. This is in no way reflective of what youll experience but Yakima has superb support. I spoke with them twice on my issue and out of their kindness they shipped me an entire setup to replace my existing one for free. 674326



- Y00409
by: Paul D.08/19/2012

A great company to do business with, and lots of merchandise in stock. I orderd a roof rack for my truck on Tuesday morning and it was on the porch when I returned from work on Thursday. I will deffinitely order more from etrailer.com 52267



- Y00101
by: steve Z06/16/2012
1994 BMW 5 Series

roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :) 44422



- Y00409
by: Lawrence B08/17/2017
Toyota Prius

I ordered a Yakima Roof Rack for my Toyota Prius from eTrailer.com. Part of the reason for purchasing from eTrailer.com was the promise that the racks were made specifically for the car and would not dent the roof. I received the rack on July 31, and installed the racks on my Prius according to instructions included with the racks. Our tandem kayak is 65 lbs . The towers were placed on the outer most part of the roof as indicated by the instructions. Yakima saddles were attached to the crossbars to hold the kayak. Nothing was close or touching the top of the roof. We transported the kayak to a nearby lake, 6 miles, and back. The next day we removed the racks from the roof and noticed 4 dents on the top of the roof. It was obvious that transporting the kayak on the rack caused the dents. We had to pay $100 to have the dents removed from the Prius roof. I cannot continue to use this rack that puts dents in the car's roof. I was extremely disappointed in the racks. In reading the Toyota manual and contacting them by phone, there is no mention of using or not using roof racks. I was shocked to learn from Rachel at eTrailer.com that your company takes absolutely no responsibility for this Yakima product they sell. The best they can do is to pass the buck and refer us to Yakima. Very disappointed, and out a lot of money for a product that damages your car. Will not recommend or buy here again. eTrailer.com does not even deserve one star in this review. 426066



- Y00409
by: John K08/17/2012
Honda Element

Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-) 52048


Comments
Do you have a video to see how it looks while you install that rail track roof device.
-- comment by: Teodoro G - 08/25/2013

1959

We have quite a few videos of Yakima roof rack installations. Is there a vehicle in particular you are looking for?

-- Patrick B - 8/26/2013


- Y00101
by: Carl12/03/2019

Yakima rack arrived a day earlier than expected. All the parts were there instructions were clear took about half hour to install. The rack is a little noisy at highway speed. Darn, guess I'll have to take the back roads! Thumbs up to both etrailer and Yakima. 729079



- Y00409
by: Gary08/11/2019

I just finished installing the Yakima Roof rack - easy to follow instruction and great support via etrailer web site ! I did have one small issue with a missing piece BUT the tech/support staff at etrailer.com took care of the problem immediately and were very helpful - the missing piece arrived in about 2 days ! Super job to your great customer service ! Thank you ! 688569



- Y00101
by: Outrider04/14/2019
2015 Ram 1500

As usual, excellent Yakima quality. But PRICEY. 628444



- Y00409
by: John04/13/2019

Typical Yakima cross bars. Coating is a little too easy to cut or gouge, but probably needs to be that way to get the grip it provides. Good enough solution for me, and allows me to continue to use all the attachments I've accumulated over the years that require a round bar 628039



- Y00409
by: Brendan03/01/2019

Item was shipped and delivered promptly. As described. 609303



- Y00409
by: Carlos M.12/26/2018
2016 Ford F-150

Bought the Yakima 58" round cross bars to use on a Leer Camper shell on my 2016 F150. The bars are a perfect width for my shell and work great with my existing Control towers. Great quality as to be expected with Yakima. 593278



- Y00101
by: Fran11/17/2018

Have owned this set of rack towers on the past 3 pickup trucks I've owned..!! Work very well...!!! I am a contractor and occasionally load them up pretty heavily....! 583486



- Y00409
by: Lynn10/28/2018

just right 578480



- Y00409
by: J.L.Bills10/11/2018
2002 Toyota Tundra

Assembly was easy fit my 02 tundra very well 573500



- Y00409
by: Clinton09/09/2018
2007 Dodge Ram Pickup

nice bars 563246



- Y00409
by: Eric07/16/2018

Easy install and they work great. 542294



- Y00409
by: Chad07/07/2018

We went from George Iowa to Yellowstone and had no problems so far with the product seems to withstand Interstate driving and high winds 539601


Show More Reviews
228
228


Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?


  • Roof Rack Recommendation for 2019 Dodge Caravan
  • I recommend the Yakima Q Tower Round Bar roof rack for your 2019 Dodge Grand Caravan because it offers a combination of functionality and durability. The rack consists of Yakima Crossbars # Y00409, Yakima Q Towers # Y00124 and TWO of the Yakima Q Clips # Y00657. These 58 inch Yakima crossbars are constructed from a strong galvanized steel so you can be confident the bars will last and measure 1-1/8" diameter to fit any variety of accessories such as the Yakima SkyBox 12 # Y07334 cargo
    view full answer...

  • What Are The Roof Racks That Come With The Nucamp Boondock Tab 320s Travel Trailer Called?
  • I reached out to my contacts at Yakima and they advised that the roof racks that come with the 2018 Nucamp Boondock tab 320s travel trailer are Round Cross Bars for Yakima Roof Rack System # Y00409. The Nucamp Boondock trailer model has 58" bars, but they are also available in 48", 66", 78" and 86" long. To attach the Round cross bars you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers Qty 4 # Y03536. You will also need the Landing Pad 1
    view full answer...

  • Roof & Roof Rack Requirements for Installing Yakima Skyrise Roof Tent Y07406
  • Thank you for the photo of your NuCamp [email protected] 320 Boondock trailer that appears to be fitted with a Yakima track-type roof rack on its rear surface. If this is how your trailer is set up you are all ready to mount the tent for transport. The Yakima SkyRise HD Tent # Y07437 does indeed weigh 115-lbs as you stated. The SkyRise fits on all crossbar shapes, including the round bars like # Y00409 used by Yakima, the square bars used by Thule as well as elliptical and aero-style bars. The
    view full answer...

  • Mounting Runners to Roof of 2015 Dodge Caravan
  • I would recommend going by the owner's manual, personally, and not drill into the roof of your 2015 Dodge Caravan because airbags are not something you want to mess with. I simply wouldn't risk damaging the airbags, especially if you are transporting little ones. I would recommend instead going with a roof rack for a naked roof like The Yakima Q Tower Roof Rack which consists of the following parts: Round 58 inch crossbars # Y00409 Q Clips for Q Towers # Y00657 Q Towers # Y00124. This
    view full answer...

  • Roof Rack for [email protected] Boondock Camper Trailer
  • [email protected] tear campers like their Boondock Edge are challenging in terms of finding a roof rack that will work on their strongly curved roof surfaces. It is also important to confirm that your intended mounting points on the trailer are strong enough to hold the rack legs and the load that will be put on them from your cargo items. I checked with Yakima who makes a lot of track-based rack systems like the HardTop SL # Y01617. Track type racks like this are generally going to be safer than
    view full answer...

  • Determining Weight Capacity of Yakima Round Bars on Tacoma Snugtop Rebel Topper
  • The Yakima 58" Round Bars # Y00409 by themselves have a weight capacity of 165 pounds, but it is important to also verify the weight capacity of the Snugtop Rebel itself. Based on my research this looks to be at least 175 pounds for the Snugtop Rebel Topper but I still recommend verifying this. Since you are always limited by a setup's weakest component you will still need to follow the 165 pound capacity on the Yakima bars even if the topper can support more.
    view full answer...

  • Recommended Roof Rack for 2013 Wrangler 2 Door with Hard Top
  • The easiest solution would be to assemble a roof rack using the following parts from Yakima: 58 Inch Long Round Crossbars, part # Y00409 Yakima 1A Raingutter Towers, part # Y00101 Once the crossbars are in place, the Thule Flat Top Ski and Snowboard Carrier you already have will attach directly to the crossbars. When used on a Wrangler Hard Top, the drip rails that the roof rack towers attach to have a limited carrying capacity. Yakima recommends carrying skis or snowboards only,
    view full answer...

  • Best Roof Rack Fit for 2020 Jeep Gladiator
  • The best roof rack for your 2020 Jeep Gladiator consists of the Yakima 1A Raingutter Towers # Y00101 and Round 58" CrossBars for Yakima Roof Rack System # Y00409. As you can see from the accompanying photo, which is from Yakima, this roof rack system will give your Gladiator a fantastic way to mount accessories like bike racks, kayak carriers or cargo boxes so you can get to your destination in style with all your needed gear. Since this is a round bar system I highly recommend adding
    view full answer...

  • Will Yakima Roof Rack Fit Thule Roof Rack Top Channels
  • The landing pad you would need is part # Y00221 which will fit Thule roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409.
    view full answer...

  • Recommendation for Roof Rack 2014 Honda Odyssey with Naked Roof
  • A 2014 Honda Odyssey with a naked roof is a rarity. The vast majority of those vans came with factory installed rails. Although there isn't a custom fit rack available, we can still get a roof rack on your Odyssey. I recommend going with the Yakima 54 Inch Tracks, # Y01127, or the 60 Inch Tracks, # Y01135 for your Odyssey. You will want to measure the roof of your Odyssey to see which size will work best for you. This track permanently mounts to your vehicle with PlusNut hardware. There
    view full answer...

  • Yakima Q Tower Kit for a 2012 Toyota Tundra Crewmax
  • For your 2012 Toyota Tundra Crewmax to equip your Q Towers, you'll need two of the Q99 pack, part # Y00699. Be sure to order two of these, as each individual unit only includes one pair of foot packs. Your round bar will need to be at least 58 inches long in order to properly fit your Crewmax cab. The bars are available as part # Y00409 if yours aren't long enough. If you need replacement towers, two packs are available as part # Y00135
    view full answer...

  • Can Yakima Roof Rack Crossbars be Trimmed Shorter on a 2015 Ford Fusion
  • The 48 inch long Yakima crossbars would be just slightly too short to fit properly on a 2015 Ford Fusion. But what you can do is use the 58 inch bars, # Y00409, and shorten them using a saw with a blade that can cut steel. What I would do is go ahead and install the roof rack and then mark the bars where I would cut them. You will need some of the bar sticking out each end to fit the end caps on. The cuts will need to be straight otherwise the end caps will not fit and water could
    view full answer...

  • Roof Rack For Kia Sorento With Panoramic Sunroof & Factory Installed Side Rails
  • If your 2014 Kia Sorento has the SX Limited trim package with Vista Roof with a factory roof rack the Round 58" CrossBars for Yakima Roof Rack System # Y00409 will work perfect for you. This roof rack requires Yakima Q Towers Roof Rack Feet for Naked Roof # Y00124 and Q99 Q Clips for Yakima Q Towers (QTY 2) Qty 2 # Y00699 to safely mount the rack above you panoramic roof. The sunroof should not be opened while the rack is installed. Remove rack when not in use If your Sorento has
    view full answer...

  • Why Do Aftermarket Roof Racks for a 2015 Dodge Durango Have Bars that are More Forward than Factory
  • The aftermarket roof racks for the 2015 Dodge Durango with a naked roof do have the crossbars somewhat forward on the roof of the vehicle. This is because the bars attach to the door frames and the rear doors of the vehicle are right around the middle of the vehicle. I attached a picture of a Yakima rack installed on a Durango to show you. With that being said, an aftermarket rack would still work great to carry a cargo box or paddleboard. Having the boards or the box loaded somewhat
    view full answer...

  • Recommended Yakima Foot Pack To Fit Factory Rails And Crossbars
  • The Yakima Q Rack is a fit for 2016 Dodge Grand Caravan's without factory rails. You can use the Round 58" CrossBars for Yakima Roof Rack System (QTY 2), # Y00409, but to use those bars, I recommend using the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4, # Y00147. For that application you will also want the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, # Y03536. For added security, I recommend the Yakima Same
    view full answer...

  • Yakima Roof Rack for a 2015 Hyundai Santa Fe Sport with Panoramic Sunroof and Flush Side Rails
  • First, regarding the Saris Cycle-On Pro, that particular bike carrier has been discontinued. The only place it is mentioned on the Saris site even is in the archives of the manuals section. There are many other similar carriers though and I have included a link to them for you. The Yakima RailGrab towers do actually fit the flush rails on your 2015 Hyundai Santa Fe Sport. Since you already have RailGrab towers you will only need the pin adapter, # Y8880201. The 2015 Santa Fe requires
    view full answer...

  • Roof Racks for 2015 Ford Edge with Panoramic Vista Roof
  • We do have plenty of choices in roof racks for your 2015 Ford Edge with Vista roof. Just click on the link provided and select your roof style, flush rails or a bare roof, at the top of the page. You'll then see the options for that roof style. If you happen to have the bare roof you can use Yakima's JetStream bar rack system consisting of parts # Y00425, # Y00146, # Y06102 and # Y06139. If you have the flush rails on your roof then you have several choices of racks from Thule. You
    view full answer...

  • Compatibility of Yakima Q Tower Roof Rack and Factory Sunroof on 2006 Chevy Malibu Maxx
  • For your 2006 Chevy Malibu Maxx, the Yakima Q tower roof rack consisting of Round 58" CrossBars # Y00409, Q Towers Roof Rack Feet # Y00124, and Q Clips (x2) # Y00702 are confirmed to fit with your factory sunroof. Although the system itself will work without issue, some accessories that can be mounted to the bars will possibly interfere with the sun roof so you will want to check compatibility of accessories once you have the correct measurement for your fit to avoid interference. You
    view full answer...

  • Will Thule Hull-A-Port 815 Kayak Carrier Fit Yakima Round Roof Rack Crossbars
  • The 815 part number is for a version of the Hull-A-Port # TH834 kayak carrier sold by some lesser retail outlets. This kayak carrier does fit Yakima round bars as well as Thule square bars. So if you have a Yakima roof rack with the round bars you will be good to go!
    view full answer...

  • Artificial Rain Gutter Recommendation for a Trailer to Allow a Yakima Rain Gutter Roof Rack to Fit
  • Since you have Yakima Rain Gutters towers like part # Y00101 all you would need is their set of artificial rain gutters part # Y08001 to install the roof rack you have on your trailer. We do not offer a way to attach your Yakima components directly to a square bar setup that you may have.
    view full answer...

  • Can Yakima Raingutter Roof Rack Work With 2011 Jeep Wrangler Unlimited
  • The Yakima roof rack that uses the 1A Raingutter Towers is confirmed as a fit for your 2011 Jeep Wrangler Unlimited. There is no drilling required for installation. The weight capacity of this roof rack is 100 lbs. To order this roof rack you will need part # Y00409, and part # Y00101. The Thule Roof Rack does not require drilling for installation either. This roof rack features steel square crossbars and has a weight capacity of 165 lbs. To order this roof rack you will need part
    view full answer...

  • Alternating Sides When Installing Yakima Raingutter Towers On 1987 Volkswagen Vanagon
  • One problem that many folks have when installing a roof rack is that they will work on one side of the vehicle to tighten it down and then move to the other side only to find that they cannot get it to tighten up as they need. When installing the roof rack it is recommended to tighten each side evenly which means you will need to tighten one side a little and then move to the other side and tighten that side the same amount, alternating until the roof rack is secure, much like tightening
    view full answer...

  • What Prevents the Knobs on the Yakima 1A Raingutter Towers From Coming Loose
  • Essentially, the tension that the towers # Y00101 are under are what prevents them from loosening. To prevent the knob from turning you can install lock cores, # Y07204. When locked the knob the system cannot be loosened.
    view full answer...

  • Parts Needed to Install 3-Crossbar Yakima Roof Rack on 1989 Toyota Land Cruiser
  • Yes, you can use 2 of Yakima Replacement 1A Raingutter Tower # Y8810137 to add a third round crossbar # Y8810025 to the roof of your 1989 Toyota Land Cruiser. You will want to order the following items and quantities to get your 3-bar rack system. # Y00410 = 1 # Y00101 = 1 # Y8810137 = 2 # Y8810025 = 1 # Y8810136 = 1 These items will give you a total of three bars and six towers.
    view full answer...

  • Yakima Roof Rack Recommendation for a 2011 Jeep Wrangler
  • The difference between the two mounting brackets is that the # Y08001 moves the attachment point for the Raingutter tower part # Y00101 out further to clear a roof that is tall or has steep or square sides. The # Y08002 is the regular one used for roofs that are shorter and have less steep sides. It really depends on the profile of your roof and how high/low you want to install the gutter tower. If you are installing the rack high on the roof you would want the # Y08002. If you
    view full answer...

  • Roof Rack for a 2000 Jeep Wrangler with Aftermarket Hard Top
  • In order to install a roof rack on the aftermarket hard top on your 2000 Jeep Wrangler you will have to do some drilling. You would need to use the Yakima side loader brackets # Y08002, to create artificial raingutters. Then you will need Raingutter Towers, # Y00101, and CrossBars # Y00409. At this time there are no non-drilling options for the 2000 Jeep Wrangler with an aftermarket hard top that does not have raingutters.
    view full answer...

  • Recommended Spacing Between Yakima Rain Gutter Towers on 1998 Jeep Cherokee
  • When mounting rain gutter towers, # Y00101, there is no specific distance apart they must be placed. What you will want to look at is where you can mount them (the strongest points on the roof would be ideal) and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. Just remember that if you place the bars too far back then items on the roof may hang over the back end too much. Same for the front. In addition
    view full answer...

  • Yakima Roof Rack and Kayak Carrier Recommendation for a 2015 Jeep Wrangler Unlimited Hardtop
  • Yes you can. I checked with Yakima and the Yakima Raingutter 1A Towers part # Y00101 are confirmed to fit the factory hardtop of your 2015 Jeep Wrangler Unlimited. The recommended crossbars would be the part # Y00409. Yakima says this rack setup has a weight capacity of 100 lbs. You will need to consult your owners manual to determine what Jeep says is your roof capacity and be sure to go with the lower of the two as the overall capacity. For a carrier that can carry up to 2 kayaks
    view full answer...

  • Kayak Rack and Roof Rack Recommendation for a 2016 Jeep Wrangler Unlimited
  • Yakima also offers a roof rack solution. Crossbars can be installed using the Yakima 58 inch crossbars, part # Y00409 and Rain Gutter Towers, part # Y00101. However, this rack can only be used when the soft top is removed. With the soft top on there are no solutions we can provide. I would recommend the Yakima BigStack 2 Kayak Carrier, part # Y04041 for use with this rack.
    view full answer...

  • Yakima Roof Rack Parts Needed for a 1999 Ford Econoline Van
  • The components needed to install a Yakima roof rack on your 1999 Ford Van that has rain gutters are the part # Y00410 for the crossbars and then the part # Y00101 for the raingutter towers. Feel free to send me pictures of your van if you like and I will check them out if you like.
    view full answer...

  • Non-Roof Rack Towers for a 2016 Jeep Wrangler
  • For your possible application, I recommend a set of Yakima A1 Raingutters, part # Y00101. These are a confirmed fit for your 2016 Jeep Wrangler, and have individual loops on the top that can be tightened to fit your application. Unfortunately, these only come in a four pack, but depending on what you plan on using them for, this can be useful as additional contact points. I recommend a kit of SKS locks, part # Y07204, as these use a simple screw-on assembly and the locks will secure
    view full answer...

  • Which Roof Racks Will Fit a 2004 Ford E-150 Van
  • We do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts: Crossbars, # Y00410 Yakima Raingutter Towers, # Y00101 I have included a link to the installation details for the Raingutter Towers for you. If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you.
    view full answer...

  • Roof Rack System for 2008 Jeep Wrangler Unlimited with Factory Hardtop
  • According to Yakima, the drip rails on that factory hard top are not structural. When used in this installation, the crossbars are intended for use with skis or snowboards only. The maximum allowable load would be 6 skis or 4 snowboards. When used within this limited scope, the drip rail mounts will not damage the rain gutter or drip rail. If used for any other purpose, they would most likely be damaged. If you decide to install the Y00101 Raingutter Towers and 58 inch load bars, keep
    view full answer...

  • Recommendation on a Roof Rack and a Kayak Carrier to Fit a 2016 Ford F-150 Super Cab
  • I have a solution for a roof rack and kayak carrier for your 2016 Ford F-150 Super Cab. I recommend the Yakima JetStream Roof Rack System, # Y00429 JetStream Crossbars, # Y00146 BaseLine Towers, and # Y06122 BaseClip Fit Kit. The JetStream bars are an aerodynamic aero design that will cut down on wind drag and noise when in transit. The crossbars are constructed of lightweight and sturdy aluminum and full length design allows for maximum space for carrying roof mounted accessories. For
    view full answer...

  • Rain Gutter Roof Rack Availability for a 1959 Rover P4
  • The Yakima Tower Kit we have for Rain Gutters is part # Y00101. This has never been tested on your 1959 Rover P4 but it is designed to fit rain gutters like what you have. You would need two crossbars part # Y8810023 as well. The height of the gutter feet is 7-1/4 inches. I looked at pictures of the roof of your vehicle and it has a pretty rounded roof. If you needed a taller setup you would also need the spacer to increase the height part # Y01101 which will ad 3-1/2 inches.
    view full answer...

  • Why Aren't Rubber Boots Included for the Outside Raingutters with Yakima Raingutter Towers
  • I assume you are talking about the hook part of the gutter feet. A rubber boot would cause fit issues with the Yakima Raingutter towers # Y00101. Rubber or plastic can flex and move which could lead to the clamp part of the tower to come off. The hooks are coated so as to avoid metal on metal contact. If you want you could place protective clear film, # 853-5481, in the desired locations. This is a set of 4 film sections so that works out well since there are 4 towers. But you may need
    view full answer...

  • Will Yakima Round 48 Inch Crossbars # Y00408 Fit My 1997 Toyota Corolla
  • Yes, the Yakima Round 48 Inch Crossbars, part # Y00408, will fit your 1997 Toyota Corolla. To mount the # Y00408 Crossbars, you will need to use Yakima 1A Raingutter Towers, part # Y00101. You will want to check the roof load carrying capacity of your Corolla as stated in the vehicle owners manual as you will not want to exceed it. I have linked an FAQ roof racks that you may find as a good reference. Also linked are all the roof racks we have available for the 1997 Toyota Corolla.
    view full answer...

Yakima Accessories

Fit to this rack on your 1984 Toyota Pickup

Info for these parts were:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Test Fit:
Zack K
Test Fit:
Robert C
Test Fit:
Adam E
Video by:
Andrew K
Video by:
Zach D
Written by:
Tyler C
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Toyota Pickup Accessories




Product Experts Available Now!

Call 800-298-8924