2010 Chevrolet Malibu Roof Rack by Yakima

Roof Rack Includes:

Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2

Part Numbers: Y00408,Y00146,Y03536,Y06127,Y06153

Retail:$481.57

Our Price: $468.00

You Save: $13.57

This item qualifies for Free Shipping


In Stock
Roof Rack Y00408 - 48 In Bar Space - Yakima
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos




Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
part number: Y00408

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Features:

  • Serve as backbone of your aftermarket roof-rack system
  • Provide stability to roof-mounted racks
  • Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
  • Fit all Yakima towers
  • Constructed from vinyl-coated, galvanized steel


Specs:

  • Quantity: 2
  • Capacity (depending on application):
    • 4 Bikes
    • Yakima BasketCase and PowderHound
    • 2 Bikes and a kayak
    • 2 Bikes and Big PowderHound
    • 2 Bikes and SkyBox Pro 12
    • Canoe and a bike
    • SkyBox Pro and a bike
  • Dimensions: 1-1/8" diameter x 48" long
  • Steel wall: .085" thick
  • Lifetime warranty


NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).



8000408 Round 48" CrossBars for Yakima Roof Rack System (QTY 2)



BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4
part number: Y00146

Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.

Features:

  • 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
    • Pair with 2 Yakima crossbars and BaseClips (sold separately) to create a complete roof rack
  • Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
  • Pivoting bases can be adjusted during installation to ensure towers are seated correctly
  • Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
    • Also fit RoundBar crossbars with adapter (Y03536 - sold separately)
  • Safe and easy installation with DropHook system and included torque tool
    • DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
    • BaseClips (sold separately) attach to hooks in tower assemblies and tighten for a secure grip
    • Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
  • Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
  • Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction


Specs:

  • Maximum tower load capacity: 220 lbs
  • Limited lifetime warranty


BaseLine Towers

The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars (sold separately) to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips (sold separately).


Versatile BarBed

Versatile BaseLine BarBed

The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.


CoreBar CrossbarJetStream Crossbar

The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.


RoundBar CrossbarRoundBar Adapter

The towers also work with Yakima RoundBars with adapters (Y03536 - sold separately). The adapters slide over the bars and secure to the towers with bolts.


Included Torque Tool

The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.


Adjustable Pitch and Toe Angle

BaseLine Pitch and Toe Diagram

The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.


Secure Installation with DropHook System

BaseLine DropHook System

The towers install with custom-fit BaseClips (sold separately). To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.


Same Key System Locks

4 Pack SKS Lock Cores

BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.



8000146 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4

Replaces 8000124





RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
part number: Y03536

These adapters allow you to use Yakima RoundBars with BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters and 4 endcaps.

Features:

  • Adapters let you mount your Yakima RoundBars on BaseLine, SkyLine, TimberLine, or RidgeLine towers
  • Easy installation - adapters slide onto bars and attach with bolts (included with towers)
  • 4 Adapters and 4 RoundBar endcaps included


8003536 RoundBar StreamLine Adapter for Yakima Base Line, Sky Line, Timber Line, and Ridge Line Towers - Qty 4





BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
part number: Y06127

These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.

Features:

  • Custom-fit mounting clips and pads allow you to mount BaseLine towers (sold separately) on your vehicle with a naked roof
  • Padded, stainless steel clips provide secure grip on your door jambs
    • Snap onto DropHooks inside towers
    • Protect door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded rubber pads fit the contours of your roof
    • Clip onto bottoms of towers
    • Protect roof from scratches and abrasions


Specs:

  • Quantity: 2 clips and pads
  • Limited lifetime warranty


DropHook System Installation

BaseLine and BaseClip

Custom-fit BaseClips let you mount BaseLine towers (sold separately) to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.


Installed BaseLine and BaseClip

The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.



Molded-Rubber Pads

The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.



8006127 Custom Base Clips and Pads for Yakima Base Line Towers





BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
part number: Y06153

These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.

Features:

  • Custom-fit mounting clips and pads allow you to mount BaseLine towers (sold separately) on your vehicle with a naked roof
  • Padded, stainless steel clips provide secure grip on your door jambs
    • Snap onto DropHooks inside towers
    • Protect door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded rubber pads fit the contours of your roof
    • Clip onto bottoms of towers
    • Protect roof from scratches and abrasions


Specs:

  • Quantity: 2 clips and pads
  • Limited lifetime warranty


DropHook System Installation

BaseLine and BaseClip

Custom-fit BaseClips let you mount BaseLine towers (sold separately) to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.


Installed BaseLine and BaseClip

The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.



Molded-Rubber Pads

The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.



8006153 Custom Base Clips and Pads for Yakima Base Line Towers





Video of Round 48" CrossBars for Yakima Roof Rack System (QTY 2)


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Yakima Roof Rack - Feet - Y00124 Review

Today we are going to cover the typical components of a Yakima roof-rack system. We will start from the bottom and work our way up. On the bottom part are the actual pieces that are going to make actual contact with the vehicle, and those parts are referred to as Q Clips, part number Y0605. They actually adapt the rack to the car itself. And this is a set of the Towers right here, part number Y00124. These go from the roofline to the crossbars. And the Q Towers are lockable, so no one can take them off your vehicle. They do come with the cases for the locks themselves. These do not have the key lock inside them you do have to add the cores to them yourself. And that is part of Yakimas SKS System. And then the last part is the crossbars themselves, part number Y0408. And these bars come in various lengths, designed for specific applications. What we will do now is go ahead and assemble these components and actually install them on a typical application. In this case, we are actually going to install this on a 2005 Volkswagen Jetta.

We have the components for one corner of the rack system to give you an idea of how they go together. First off, we are going to open up the latch here, and there is a little adjustment screw right here. It actually fine-tines your adjustment to snug down the brackets to your car. And when you have them tight enough, you just close them to latch into place. We will go ahead and take out this screw and install the Fit Kit first. What happens here is that this Fit Kit part will fit on the bottom side here, and these corners - these corners right here - will actually fit into these slots. It is kind of a press fit, so you have to push pretty hard to get it in there. All right, once you get the corners started in there, then just push it together. And you can see how it fits into the corners here. And the next thing to do is to get it lined up with the keyhole here so we can attach the lock holder itself. And it is keyed, so it can go in only one way. And when you have it installed, put your clip in there that holds it in place. Now we can go ahead and reinstall this back into our Tower. And you do not have to go all the way in, maybe halfway, because you will have to go back and adjust both sides evenly when you install it on the vehicle. Now we will put our pad in for the Fit Kit, and the pad simply snaps into place. And that takes care of the Tower, and we only have three more to go.

When they come from the factory, the clamp for the bar itself is compressed, so you need to take the clamp loose so you can slide it on the bar. What you want to do is, this little plastic cover here, you want to pull that back out to get to the little assembly screw right here. And you have just got to undo it with the included Allen key. And then you just want to loosen it up a little bit and then push that tab down so you have a nice, round circle on the inside. This is the part that actually gets clamped up against the crossbar so it does not go anywhere. And then install our endcap. Repeat the same procedure for the other side of this bar and for the other bar, too. And then this rack will be ready to install on our vehicle. Now the instructions that come with the kit and the Fit Kit will tell you exactly where to mount these on the vehicle. So you actually snug this up, then the bar here actually snugs it down to the roofline. And you may have to adjust it a little bit left and right and on the threads of the center bolt to make sure you latch it on tight. All right, and then just repeat the same process for the rear crossbar. And with that, your roof rack is ready to add your accessory to it.



Customer Reviews

Round 48" CrossBars for Yakima Roof Rack System (QTY 2) - Y00408

BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 - Y00146

RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 - Y03536

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06127

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06153

Average Customer Rating:  4.8 out of 5 stars   (323 Customer Reviews)

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These adapters allow you to use Yakima RoundBars with BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters and 4 endcaps. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.

- Y00146
by: Steve G09/13/2017
2017 Ford Edge

Easy to order parts specific to our 2017 Ford Edge Titanium. Ford does not offer a rack on this model due to sunroof. Install was straight forward and looks/works great. Thanks. 432079



- Y03536
by: David01/10/2018

As always an exceptionally well designed, quality product. Yakima has never disappointed me for more than 25 years now. I still use some of my original rack package. etrailer, per usual, had a great price and wonderful instructional videos. Shipping was fast and everything was perfect. It’s amazing that Yakima can make racks fit so many cars like it was a custom job. This was just a piece of an entire roof rack base with cross bars. Excellent stuff 466262



- Y00408
by: Chris05/14/2018

Nice product. Installed with my son on his 2003 mini in under an hour. Strong and durable. Suggest that you mark the dimensions on the cross bars with a pencil as they supports tend to move as they are tightened. 508587



- Y00146
by: Elliott08/04/2018
2015 Jeep Grand Cherokee

I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish. After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it! 549915



- Y00146
by: Aaron06/07/2017

Awesome price! Shipped to me fast and it's an amazing product. Customer service helped me through some ordering confusion and got everything figured out very smoothly. Love the roof rack! 389986



- Y00408
by: Debbie S.06/22/2012

I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise. 45299



- Y00408
by: Fabe Red03/12/2017

Loved the Yakima roof rack system. It's been a year and it is still going strong. Such an easy install and it looks great on my truck. My Yakima Skybox 16 sits perfectly atop the roof rack. My drives to The Sunshine State are all the more pleasurable and comfortable. My cargo area now has plenty of extra space since I load up my skybox 16 which sits perfectly on my Yakima roof rack system. The service from Etrailer was awesome. Thank you guys for your customer service and for selling such great products. I would recommend Etrailer to anyone. 355638



- Y00146
by: Aaron W.05/30/2016

Everything came in okay, instructions were very clear. Very easy assembly. the kit was completely built. Only one problem, I went to put the last adapter clamp on and it would not thread in. The hole was a size too big and the threads were barely there. 253626



- Y00408
by: John05/27/2016
Volkswagen

Great rack, go on fast, easy to install and work well on my VW TDI wagon. Care has to be given and follow the instructions for the install to what type of rails you have. Works great carrying the VW luggage carrier and plan on using it to carry kayaks as well. Just have not decided what kayak rack type to get yet. 252339



- Y00146
by: Martin R.07/19/2017

Installation pictures 407824



- Y00146
by: David S.09/10/2017

Great price and quality. The instructions are a little tricky, even for those who are mechanically inclined. But that's partly because of the several adjustable features (like pitch of the cross bar and toe-in adjustment of the foot of the tower). But those adjustable features are also what makes the Yakima superior to some other brands. Even Thule, I think. 430867



- Y00408
by: Tom V09/29/2012
2008 Saturn Astra

Roof Rack 2008 Saturn Astra The roof rack arrived one day early...The packaging was excellent and the quality of the product more than met my expectations. The instructions made the insulation very easy. It took less than 45 minutes to install the unit complete. 56141



- Y00146
by: Cami03/10/2018

The roof rack has been awesome! It has been really handy to be able to attach our bike rack attachment, kayak bars or traveling cargo carrier. My only complaint is that the end caps fell off somewhere along one of our many adventures and looks a bit disheveled. Other than the appearance it has been very versatile and we love it! 483437


Comments

Sorry to hear your covers fell off! Replacement covers are available as part # 8880620
Replacement Door Assembly for Yakima BaseLine Towers - Qty 1
$9.81
. Using lock cores like part # Y07204
Yakima Same Key System (SKS) Lock Cores (QTY 4)
$60.00
will ensure that the covers stay in place, and will provide a deterrent to potential thieves who might be interested in stealing the crossbars...

-- Mike L - 03/11/2018

35706

- Y00146
by: Bill12/13/2016

I want to thank the staff at eTrailer for their outstanding support. After my roof rack order got off to a shaky start the customer service staff stepped in and made it right; 100% RIGHT. I cannot thank them, and eTrailer, enough. Regarding the roof rack itself, I have now installed it and can vouch that the installation was a breeze. All parts fit and the instructions were correct. For the record, this is not my first purchase from eTrailer (I've bought hitch items from them before) and it won't be my last. They have ALWAYS given great service, their web site works, their products and descriptions are good, etc., etc. Thank you! 326328



- Y00146
by: Richard06/28/2017
Honda

etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit) One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes. Used in rain at least once, (sustained 60mph), with no leaks. 401272



- Y00408
by: Rob02/29/2012
1994 Honda Accord

The installation of this rack system went very well, all of the instructions were easy to read and use. I have attached some pictures of our installation. The vehicle is a 1994 Honda Accord EX four door sedan 32789



- Y00146
by: Rick05/22/2018

Great product & fast service 512410



- Y00146
by: John P.08/29/2018
2017 Volkswagen Golf

Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on. etrailer.com shipped these out quickly and all parts arrived without damage. 559478



- Y00408
by: Maggie07/23/2015

It arrived on time and was pretty easy to put on my car. (Glad it was a wagon and not a high-roofed SUV!). The directions couldn't be any clearer. I had trouble with one bolt "catching" but my daughter gave the piece a little more oomph and it caught. I like that it had words in addition to drawings. So many companies take the easy way out and just use pictures/drawings with arrows. Not so helpful. All of that praise aside, I haven't hit the road with my kayak yet. Tomorrow will tell. 213871



- Y00408
by: Wayne G.05/10/2012
Ford Explorer

My Explorer, love the service, from order to install in 3 days 39804



- Y00408
by: Ron P.07/12/2011
2011 Ford Fiesta

We got a Yakima Roof Rack system with locks and fairing for a "lime squeeze metallic" (Green...) 2011 Ford Fiesta 5dr Hatchback. Received the package yesterday and set it up within about an hour. 19256



- Y00146
by: D White06/20/2018

Ordered new towers so as to use my old-school round bars (I bought these at least 18 years ago, maybe even earlier) and bike and canoe accessories on a new vehicle (naked roof 2018 CR-V). Installation was tedious, as usual, but not difficult and the written instructions were straightforward. Youtube helpful too but not necessary. Have hauled bikes and the canoe in high wind on the interstate (no more than 65 mph though) on the CR-V and so far so good. Have had excellent results with Yakima racks on 3 vehicles now (2 sedans and now the CR-V) over last 28 yrs. This is my first purchase through etrailer. Very pleased. Good price, excellent service online and via phone, rapid delivery. Highly recommend. 524695



- Y00408
by: Travis08/23/2013
Audi Q7

I've attachec a few pictures of the Yakima rack on my Audi Q7. It took a few attempts to find the right combination of attachments, but in the end, the pin attachments work best with the access points on the factory flush-mount rails. Great product!!!!! 96520



- Y00146
by: Matt10/18/2018
2014 Honda CR-V

Awesome! Thank you! 575552



- Y00146
by: Gregory09/24/2018

Fast service, accurate part selection, excellent fit. Customer service was superb. 568427



- Y03536
by: Karl04/11/2019

Etrailer has been a great resource for me, quite knowledgeable and helpful. Yakima products are of good quality and engineered well. I’m just bummed that every time I change vehicles it’s another free hundred to change the components. 625671



- Y00146
by: Allen01/14/2019

Arrived in good condition. All parts where there. It was easy to install. 597423



- Y00146
by: Alex11/05/2018

Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked. 580388



- Y00146
by: Esmeralda09/03/2018

Excellent 561264



- Y00146
by: Gregory09/03/2018
2015 Chevrolet Silverado 1500

How do you go wrong with Yakima? The system works great on the roof of my 2015 Chevy 'High Country' Crew cab. I am using it to support a cage style system that holds my 'handyman jack' as well as a spare 20" wheel & tire system. 561232



- Y00408
by: John P.08/29/2018
2017 Volkswagen Golf

Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on. etrailer.com shipped these out quickly and all parts arrived without damage. 559494



- Y03536
by: John P.08/29/2018

Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on. etrailer.com shipped these out quickly and all parts arrived without damage. 559495



- Y00146
by: Tom08/09/2018
2017 Honda Fit

Great product! Yakima is hard to beat! 551551



- Y03536
by: James08/01/2018

Great transaction and prompt delivery. Now I can use my round bars on the Touareg. 548602



- Y00146
by: Robert t06/25/2018

After a year, the racks are holding up nicely and still have a solid fit. I only put them on the car when needed. It just takes a few minutes to set them up and go. 527070



- Y03536
by: D White06/20/2018

Ordered new towers and clips so as to use my old-school round bars (I bought these at least 18 years ago, maybe even earlier) and bike and canoe accessories on a new vehicle (naked roof 2018 CR-V). Installation was tedious, as usual, but not difficult and the written instructions were straightforward. Youtube helpful too but not necessary. Have hauled bikes and the canoe in high wind on the interstate (no more than 65 mph though) on the CR-V and so far so good. Have had excellent results with Yakima racks on 3 vehicles now (2 sedans and now the CR-V) over last 28 yrs. This is my first purchase through etrailer. Very pleased. Good price, excellent service online and via phone, rapid delivery. Highly recommend. 524700



- Y00146
by: Mike06/20/2018
2017 Ford Edge

Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process. 524277



- Y00146
by: Matthew06/11/2018

E trailer always helpful. Shout out to Leslie and George. Keep up the good work 520322



- Y00146
by: Edward05/31/2018
2015 Ford F-150

I am totally happy with the Yakima racks. I ordered the Core Bars for the 200lb capacity and the first order arrived damaged. I called etrailer and they provided excellent customer service and had replacements to me and double boxed for protection in 2 days! Very happy with the customer service at etrailer.com! Only reason for 4 stars is that the Core Bars are coated in plastic and after mounting my Malone j Style Kayak carriers, the plastic coating gets damaged. Maybe this would not happen with other attachments but this is my experience. Both products worked great, just not a perfect match and Core Bars would be better if Aluminum and not plastic coated, to eliminate damage to the coating... 514445



- Y03536
by: Ralph05/20/2018

Great service 510507



- Y00408
by: Nicholas05/15/2018

Excellent setup. Fit perfectly on my Mini. I feel really confident about the installation, and it is rock solid. I've already mounted a mountain bike rack to it, and plan to add a kayak mount next. It doesn't make any more noise than i'd expect, just some wind resistance. 508861



- Y00408
by: Amber05/05/2018

Great to do business, one item was back ordered and still arrived in less than a week. Awesome 505172



- Y00146
by: Ron04/13/2018
Pontiac Trans Sport Van

We love the rack! We use it to transport a kayak and a paddleboard to and from the lake. Very strong and easy to load. 496003



- Y00146
by: Steve03/24/2018
2015 Chevrolet Silverado 2500

Great stuff as usual from Yakima. Fit and functionality are very good! Etrailer really have their stuff together. Fast shipping! 488499



- Y00146
by: James03/11/2018

Great product. I tried a different cheaper priced option and ended up returning them. You get what you pay for sometimes. I'd buy these again or sure. And etrailers customer service was top notch as always. 483683



- Y00146
by: Richard B.03/11/2018

Bought kayak racks. Took a while to put together, but they are very high quality. etrailer send a wrong part (digits on the part number were reversed), but it was very easy to get this corrected and I received the correct part in less than a week. I even spoke to someone on a Saturday afternoon about the mix up who was very pleasant! They have my vote. 483889



- Y06127
by: JD03/07/2018
Hyundai Sonata

Hyundai Sonata - glass pano roof. These items have been on for about 1-year. So happy with the set up. I’ve take a road bike and a mountain bike on 500+ mile trips. The mounts do an excellent job. 482412



- Y03536
by: Chris02/11/2018

I've got a bunch of 20yo "vintage" Yakima gear that is all setup for the round bars. I'm very happy that this adapter is available to use with modern flush factory rails and Ridgeline towers. 474866



- Y00408
by: SJHughes12/23/2017

WHat can you say...they are round bars. Covered in a plastic type coating that is permanently marred when tightening to mounting towers making swapping to other applications in the fiture maybe not so ideal. Work great fro the original install however. 462355



- Y03536
by: Herman12/04/2017

Looks and feels solid. Easy to install into towers with a snap. 457170


Show More Reviews
350
350


Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?


  • Recommended Roof Rack for Bikes and Surfboards on a 2019 Mini Cooper 2 door
  • The only roof rack option for the 2019 Mini Cooper 2 door is Yakima part # Y00408 for the crossbars, part # Y00124 for the feet and 2 sets of clips part # Y00728. I recommend adding a fairing to the setup. Yakima fairing part # Y05018 for round bars. The fairing deflects wind around the roof rack to prevent wind noise. The Yakima HighRoad roof bike rack part # Y02114 allows you to carry 1 bike on the roof of the Mini Cooper. The carrier is a no frame contact carrier so it will not damage
    view full answer...

  • Roof Rack Recommendation for a 2015 Mini Cooper
  • For your 2015 Mini Cooper the Yakima Roof Rack that you referenced that consists of part numbers # Y00408, # Y00124, and # Y00728 has been confirmed as a fit and would work well.
    view full answer...

  • Roof Rack Recommendation for a 2005 Subaru Impreza RS
  • You can add an aftermarket roof rack to your 2005 Subaru Impreza RS, but we will need to know if you have a sedan model with a naked roof or a wagon model with factory installed side rails to recommend the correct roof rack for your vehicle. I have attached a link to all of the roof rack options that we offer for your vehicle. Simply choose your style of roof and a list of all compatible roof racks will populate. If you have a sedan model with a naked roof, then I would recommend looking
    view full answer...

  • Roof Rack Components To Install Yakima Roundbars on 2013 Subaru XV Crosstrek
  • Yakima did change the feet and mount kits recently but I can help you reuse your round bars on your 2013 Subaru Crosstrek. You already have bars like the part # Y00408, so you'd need the # Y03536 and # Y00147 and you'd be set. I attached a picture of what this rack will look like once installed as well as an install video on a very similar 2014 Crosstrek.
    view full answer...

  • Recommended Roof Rack for 2019 Subaru Crosstrek for Rooftop Tent
  • The Yakima SkyRise roof tents require an aftermarket roof rack with a capacity of at least 165 pounds. I verified with Yakima that they're roof rack systems are confirmed to hold the tents on your 2019 Subaru Crosstrek's roof. I like the round bar system with # Y00408 crossbars, # Y03536 RoundBar adapter, and # Y00147 TimberLine towers. The tents have a higher capacity than the 165 pounds of the roof rack because the ladder is used for support. There are two sizes of the SkyRise;
    view full answer...

  • Are Thule Roof Cargo Boxes Compatible with Yakima Round Crossbars
  • If you were to use a Thule cargo box like the Motion XT # TH6298Bthen yes, this box is compatible with a Yakima round bar roof rack. Sometimes the mounting hardware that comes with roof accessories will require an adapter to fit different style of crossbars though. The Motion XT is an excellent cargo box that requires 51-1/4" for rear hatch clearance (see attached picture) so if this is compatible with your vehicle I highly recommend going with this box. The 48" Round Yakima Crossbars
    view full answer...

  • How to Carry a Mad River Canoe on a 2011 Subaru Outback with Factory Roof Rack
  • I called Yakima this morning just to be sure and our contact confirmed that carrying your canoe will require the removal of your factory rack and adding a Yakima Roof Rack on your 2011 Subaru Outback Wagon. Parts needed would be the LandingPad 13 for Yakima Control Towers, # Y00239, Round 48 Inch CrossBars, # Y00408, and the Yakima Control Towers, # Y00124. Once the roof system is installed you will be able to use any of the Yakima Canoe Carriers. I have provided a link to these carriers
    view full answer...

  • Recommendation on a Roof Rack to Fit a 2005 Mini Cooper
  • I recommend the Yakima Roof Rack System which consists of # Y00408 crossbars, # Y00124 Q Tower Feet, # Y00683 Q83 Q Clips, and # Y00716 Q116 Q Clips, for your 2005 Mini Cooper. The Yakima rack uses round bars and the Q Tower feet to attached to the roof of your vehicle. The Q Tower feet allow the rack to be installed on a naked roof that does not have rain gutters. The round bars have a weight capacity of 200 lbs per pair. However, this is only the breaking limit of the bar and does
    view full answer...

  • Yakima Roof Rack Recommendation for 2018 Honda Civic SI Sedan
  • To install a round bar Yakima roof rack on your 2018 Honda Civic SI Sedan requires the following components. Round 48" CrossBars # Y00408 BaseLine Towers # Y00146 RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06182 BaseClip Fit Kit # Y06183
    view full answer...

  • Which Yakima Roof Rack Will Fit A 1999 Toyota Corolla
  • The Yakima roof rack that will fit your 1999 Toyota Corolla is the Yakima Q Tower Round Bar Roof Rack which consists of the Yakima 48 inch Round CrossBars # Y00408, the Yakima Q Towers Roof Rack Feet # Y00124, and the Q Clips # Y00631. This rack is a solid foundation for anything you'll be carrying and is compatible with your Corolla. Anytime you are going to be carrying cargo on your roof you will want to check your owners manual or with the Toyota dealer on what the weight capacity
    view full answer...

  • What is the Capacity of Yakima 48 Inch Roof Rack Crossbars
  • The 48 inch Yakima crossbars, # Y00408, have a weight capacity of 165 pounds no matter which mounting system you are using. Different applications have different ratings though. It sounds like you are not using the system on a vehicle roof. Whatever you are using it for, if you can determine the capacity of the mounting surface that will be beneficial as you do not want to exceed it. Always go by the lowest rating.
    view full answer...

  • Yakima Roof Rack Recommendation for a 2013 Subaru Outback Wagon with Factory Crossbars
  • The only safe recommendation I can make for you would be to install the Yakima Roof Rack that consists of part number # Y00408, # Y03536 and # Y00147 on your 2013 Subaru Outback Wagon as there is no safe way I can recommend you modify the cargo box you have to fit the larger crossbars of your vehicle.
    view full answer...

  • Roof Rack Recommendation for a 2016 Kia Sorento with Flush Rails no Sunroof
  • The Yakima Roof Rack that consists of part numbers # Y00408, # Y00145, # Y03536 and # Y06013 has been confirmed as a fit for your 2016 Kia Sorento that has factory flush rails and no sunroof.
    view full answer...

  • Roof Rack Crossbar Recommendation for 2009 Subaru Outback Wagon w/ Factory Roof Rails
  • The Yakima RailGrab round bar roof rack you mentioned which consists of the # Y00408 48 inch round crossbars and the # Y00147 Rail towers would be an excellent choice for your 2009 Subaru Outback Wagon. The round crossbars aren't very aerodynamic, and can therefore be a bit noisy. A fairing that's sold separately as part # Y05016 would go a long way toward quieting the wind noise. Optional locks for the crossbars are available as part # Y07204. I've linked you to some FAQ articles about
    view full answer...

  • How to Carry A Canoe with a 2008 Toyota Corolla
  • I may have an option that will work for you, however, I do not recommend carrying the canoe on the bare roof of your 2008 Toyota Corolla. Most vehicles cannot handle more than 50 lbs directly on top of the roof. Instead, I recommend adding a roof rack like the Yakima BaseLine Tower Roof Rack which consists of the following parts. 48 Inch Round Crossbars # Y00408 BaseLine Towers # Y00146 RoundBar Adapter # Y03536 BaseClip Fit Kits # Y06136 and # Y06148 Yakima states that this
    view full answer...

  • 2016 Mazda CX5 Yakima Roof Rack Recommendation
  • For your 2016 Mazda CX-5 with a naked roof you would need the following Yakima components to complete a roof rack: Round 48" CrossBars # Y00408 (you most likely already have these) SkyLine Towers # Y00148 RoundBar SL Adapter # Y03536 LandingPad 11 for Yakima Control Towers # Y00233
    view full answer...

  • Yakima Q Tower Roof Rack System for a 2017 Volkswagen GTI 4 Door
  • Fits for vehicles change often, or the different body variations for a vehicle can have completely different fits, even if they are largely the same vehicle. At this time, Yakima has started to retire the Q-Clip system in favor of their newer BaseClip fits. However, for your vehicle, you will need Clips Q63 and Q112. If you have an existing round bar, or want to add a new kit to your vehicle, I recommend the following: If you don't have any raised siderails: Round CrossBars,
    view full answer...

  • Yakima Roof Rack and Kayak Carrier Recommendation for the 2014 Jeep Grand Cherokee
  • For a Yakima Railgrab roof rack for your 2014 Jeep Grand Cherokee you would need the part numbers # Y00408, # Y00148, # Y03536 and # Y00244 If your sunroof retracts into the roof of your vehicle then it wouldn't interfere with the roof rack at all. From the pictures I looked up for your vehicle that's how your sunroof opens. You should note that roof racks make quite a bit of noise, and if you have the sunroof open it's going to be pretty obnoxious. Most likely you will find that when
    view full answer...

  • Roof Rack Components For 2008 Honda Accord
  • We do sell the roof rack components for the Yakima system that will fit your 2008 Honda Accord with a naked roof. Just for information this system is designed to use crossbars that are 48 inches long, part # Y00408. To complete your roof rack you need parts # Y00146, # Y03536, # Y06123, and part # Y06170. This will give you the custom clips that attach to the doorframe of your Accord and the feet that the crossbars are attached to. To cut down on wind noise I recommend the Yakima
    view full answer...

  • Roof Rack Recommendation for a 2014 Jeep Cherokee Panoramic Sunroof
  • For your 2014 Jeep Cherokee with raised rails that run from front to back you would want the Thule AeroBlade Edge Roof Rack # TH7501-TH7502. This will work great for you and is also compatible with your panoramic sunroof. The Aeroblade bars are the quietest on the market and will also affect your gas mileage the least. Check out the install video I attached for this rack on a similar vehicle.
    view full answer...

  • Roof Rack Recommendation for 2019 Volkswagen Jetta with Panoramic Sunroof
  • I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof. For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y00146 and you'd be set.
    view full answer...

  • Recommended Roof Rack For 2017 Ford Edge With Panorama Vista Roof
  • The BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, # Y00146, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, # Y06102, and the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, # Y00425, make up the roof rack system I recommend for your 2017 Ford Edge with no existing rails or crossbars. According to the Ford owners manual for this vehicle, this rack is limited to the factory specs for load capacity of 45 kg or 99.2 lbs. I've attached
    view full answer...

  • Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  • There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've
    view full answer...

  • Recommended Roof Rack for a 2016 Ford Edge Sport with Vista Roof
  • Great news! Yakima has systems to choose from for your 2016 Ford Edge Sport with Vista Roof. The mounting hardware will all be the same but you have a choice between crossbar styles Round, Steel Corebar, and black or silver Jetstream aluminum bars. For this system you will need the BaseLine Towers # Y00146, the BaseClips # Y06102 and # Y06139, then your choice of crossbars: # Y00425 Black JetStream Aluminum # Y00428 Silver JetStream Aluminum # Y00421 Steel CoreBar # Y00408
    view full answer...

  • Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  • I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y00146 for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the
    view full answer...

  • Recommended Roof Rack for 2004 Honda Civic Coupe
  • We have several roof racks confirmed to fit your 2004 Honda Civic coupe, but there are no Rhino Rack roof racks among them. I have included a link to all the roof racks confirmed to fit your vehicle. You can then filter them by bar type, brand, color, etc. I recommend going with the Yakima Round Crossbars Roof Rack which includes the following parts: 48 inch CrossBars # Y00408 BaseLine Towers # Y00146 RoundBar SL Adapter # Y03536 Fit Kits # Y06162 and # Y06159 Check out
    view full answer...

  • Roof Rack, Bike Rack, and Kayak Carrier for a 2016 Ford Edge Sport with Panoramic Roof
  • For the best combination of quality and cost I recommend looking at the Rhino-Rack roof rack options for your 2016 Ford Edge Sport. There are options that will fit models with the panoramic glass roof. If your Edge does NOT have the factory side rails that run front to back I recommend the RS 2500 system # RRRS659B. This rack comes with everything in one part number. The bars are integrated into the feet for that factory look. I have linked a video featuring this rack for you. If
    view full answer...

  • Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  • The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof
    view full answer...

  • 2018 Jeep Grand Cherokee Roof Rack Recommendation for 2018 Jeep Grand Cherokee Non E Group Rails
  • Due to the roof design of your 2018 Jeep Grand Cherokee the only roof rack solutions we have require clips that mount to the door frame. You'll have to use the Baseline feet part # Y00146, the BaseClip fit kit part # Y06121 (quantity of 2), and then the roundbar adapter part # Y03536 to reuse your crossbars like the # Y00408.
    view full answer...

  • Yakima Roof Rack System Clips for a 2015 Toyota RAV4
  • To fit any current generation Yakima system to a 2015 Toyota RAV4, you'll need the following kit: 4 pack Yakima BaseLine Towers for Yakima crossbars, part # Y00146 Yakima Base Clip 180, part # Y06180 Yakima Base Clip 169, part # Y06169 You may also need the SL Round Bar adapters, part # Y03536 if you have round bars. There is not a Q-Tower kit available for this vehicle.
    view full answer...

  • Recommended Yakima Clips For 2016 Honda Civic 4 Door
  • I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle. However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y00146 with RoundBar adapter # Y03536. You can use the
    view full answer...

  • Recommended Roof Rack For 2017 GMC Terrain SLE
  • We do have a roof rack to fit your 2017 GMC Terrain with a naked roof. I suggest the Aerobars for better aerodynamics and less noise. For this system, I recommend the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425, the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y00146, the RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06146. This will give you a complete
    view full answer...

  • Lock Core and Key Kit for Yakima BaseLine Tower Roof Rack on 2015 Volkswagen Golf TDI
  • For your 2015 Volkswagen Golf TDI with a Yakima BaseLine tower roof rack installed you can use their lock core kit # Y07204. This set includes 4 lock cores, two standard keys and the control key you will use to install the cores in your BaseLine towers # Y00146. Please refer to the two linked videos for more on this kit and how to install it.
    view full answer...

  • Recommendation for Roof Rack and Roof Mounted Bike Rack on a 2016 Mazda CX-5 with a Naked Roof
  • I can help you get a roof rack system and bike rack for your 2015 Mazda CX-5. The Yakima rack that I would recommend for you is made up of the following parts: # Y00422 - 60 inch Corebar Crossbars # Y00146 - BaseLine Towers # Y06130 - BaseClip fit kit # Y06132 - BaseClip fit kit Since your roof is a naked style you will need the use of the fit kit clamps featured in the above listed setup. One of the reasons Yakima may have been unclear about if the Qtower would work or not is
    view full answer...

  • Will Yakima Q Towers Fit a 2009 Honda Fit
  • I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y00146 - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll
    view full answer...

  • How do I Install a Set of Yakima Cross Bars onto a 2017 Toyota Tacoma Access Cab?
  • In order to mount a set of Yakima Round Bars onto a 2017 Toyota Tacoma, you'll need the following clips and tower pieces: BaseLine Towers for Yakima Crossbars - Naked Roofs, part # Y00146 RoundBar SL Adapter for Yakima BaseLine Towers - part # Y03536 2x Base Clip Fit Kit for Yakima BaseLine Roof Rack Towers Qty 2- Part # Y06145 Note that you will need TWO (2) of the Clip Fit Kit, part # Y06145 in order to complete this installation. I've included a video of this installation
    view full answer...

  • Basic Roof Rack for a 2014 Nissan Altima
  • I have some potential solutions for you, however, there is not a Thule roof rack fit available for your vehicle. For basic racks that are similar to Thule, I recommend Yakima's Round Bar or JetStream kits. The base kit for your vehicle is made up of parts that will work with whatever bar style you choose. It is made up of: BaseLine Towers for Yakima Crossbars, part # Y00146 BaseClip Fit Kit for 2014 Nissan Altima, Front, part # Y06137 BaseClip Fit Kit for 2014 Nissan Altima,
    view full answer...

  • Yakima Roof Rack System to Fit 2017 Mazda CX-3
  • I have a solution for you to install Yakima round crossbars on your 2013 Mazda CX-3 however, there are no Q Clips or Q Towers designed to fit. Instead you will want to use the BaseLine Towers # Y00146 with the RoundBar Adapters # Y03536. Then for the fit kit you'll use the BaseClips # Y06130 and # Y06132. Two of each BaseClip is needed. Yakima recommends 48 inch Round Crossbars # Y00408 for the CX-3.
    view full answer...

  • Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
  • I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y00146, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
    view full answer...

  • Which Tool is Used to Install the Round Bar SL Adapters to Yakima Ridgeline Roof Rack Feet
  • You will use that same long handled tool you mentioned ( # 8880613 ) to secure the bar and adapters, # Y03536, to the Ridgeline feet # Y00145. The screw you need to turn is kind of hidden. It is underneath the foot. Basically, you are supposed to attach the adapters and the bars to the feet before placing the whole thing on the vehicle as one assembly. If you do that then the tool isn't too long to fit between the feet and the roof.
    view full answer...

  • Height of a Yakima Baseline Tower with a Round Bar
  • I went out to our warehouse and put a kit together real fast, and when I measured it off the ground, the round bar sits about 3-1/4 inches off the ground when installed into the required SL Adapter, part # Y03536. To note, the bottom of the baseline tower was about 2 inches off the ground. The fit kit can add roughly 1/4 inch to the tower. Your fit kit will change for the Baseline tower, and if you reply and let me know what vehicle you have, I can recommend a more complete kit for
    view full answer...

  • Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster City
  • Since the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y00148, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
    view full answer...

Yakima Carriers

Fit to this rack on your 2010 Chevrolet Malibu

Yakima WindShield Fairing for Roof Racks - 46" Long
Y05018

Our Price: $119.00


Info for these parts were:

Expert Research:
Michael L
Video Edited:
Zack K
Expert Research:
Sarah L
Video by:
Andrew K
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Test Fit:
Rick A
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Kathleen M
Video Edited:
Dustin K
Installed by:
Cole B
Expert Research:
Jeffrey L
Video Edited:
Sue W
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Hayden R
Test Fit:
Jared G
Test Fit:
Savanna B
Video by:
Zach D
Photos by:
Stacy F
Video by:
Jonathan Y
Video by:
Robert G
Test Fit:
Colin H
Photos by:
Amber A
Photos by:
Zach O
Updated by:
Sarah W
Written by:
Daron K
Updated by:
Jenny M
Updated by:
Hannah L
Video by:
Michael B
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Chevrolet Malibu Accessories