SnowBear Winter Wolf Snowplow - 2 Point Mount - Electric Actuator - 82" Wide x 19" Tall
Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows

Heavy-duty snowplow mounts to your vehicle with custom brackets and lets you easily clear your driveway or lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.

Features:

• Heavy-duty, adjustable snowplow lets you clear parking lots and driveways with your vehicle
  • Custom-fit mounting brackets attach plow to the front of your truck or SUV
• Strong, heavy-duty, professional-grade design
  • 2 Points of attachment provide a stronger, sturdier connection than a standard, single-point hitch mount
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
• Electric actuator raises and lowers plow smoothly and consistently
  • Internal clutch prevents damage caused by attempting to under- or overextend the actuator
  • Simple, chain-lifting design has fewer moving parts than a winch
• In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
  • Includes a wireless remote control as an alternative to the toggle switch
• Adjustable, 5-position blade can be manually angled left, right, and straight ahead
  • Manual release handle is easily accessible from front or back of plow
• Terrain-adjustable design for efficient plowing with less tripping
  • Rocking blade pivots up to 6" to allow maneuvering over uneven terrain
  • Trip springs and eyebolts are angled so blade rests on ground at correct angle
• Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Poly scraper blade attachment (SB324-068 - sold separately) allows you to plow over grass or decorative pavement without worry of damage
• Skid shoes let you adjust plow height to prevent blade from digging into the ground
• Strong rubber deflector allows for better visibility by directing snow away from your windshield
• Red visibility markers help you see plow edges so you can steer away from obstacles
• Rugged and durable, all-steel construction
• Black powder coat finish provides corrosion resistance
• ISO certification ensures consistent, quality manufacturing
• Assembly required
• Made in Canada

Specs:

• Blade dimensions: 82" wide x 19" tall
• 5 Blade angles:
  • Left 11 degrees
  • Left 22 degrees
  • Straight ahead
  • Right 11 degrees
  • Right 22 degrees
• Distance from bumper: 39"
• Actuator lift capacity: 1,000 lbs
• Weight: 370 lbs
• 1-Year limited warranty

Note: Due to the size of this item it ships via truck freight.

The SnowBear Winter Wolf snowplow conveniently attaches to the front of your vehicle at 2 points to create a sturdy, stable snowplow setup that will allow you to effortlessly plow snow for years to come. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Winter Wolf snowplow has a compact yet strong and sturdy design.

Sturdy 2-Point Mounting System

The Winter Wolf snow plow mounts to your vehicle using custom-fit brackets . The brackets install on the frame of your vehicle and provide attachment points for the plow. These 2 points of attachment ensure a strong, sturdy connection between the plow and your vehicle. As a result, the blade is more stable and steady than the blade on a hitch-mounted snowplow because the hitch-mounted setup connects to your vehicle at just 1 point. This improved stability allows for better, more uniform plowing. Having 2 points of attachment also allows for better distribution of the load, which means less strain on the plow and on your vehicle.

To mount the plow, just slide the frame into the brackets that install on your vehicle, and pin it into place.

How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.

To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Winter Wolf.

When you are finished, put your vehicle in park and lower the plow. Because this plow was not designed for travel on public roadways, be sure to remove the plow from your vehicle after every use.

Smooth, Controlled Lifting with Electric Actuator

The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.

Add-On Accessories

SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Winter Wolf snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.

The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.

With the caster kit (SB324-126), it will be a breeze to move and store the Winter Wolf snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.

The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.

If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-068) is perfect for replacing the harsh, steel scraper on the Winter Wolf. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.

324-166 Snow Bear Winter Wolf Snow Plow - 2 Point Mount - Electric Actuator - 82" Wide x 19" Tall

These custom-fit brackets provide the attachment points for your SnowBear Hydraulic or Winter Wolf snowplow to mount to your vehicle. The 2-point brackets bolt to existing holes in your vehicle's frame for a sturdy connection.

Features:

• Custom-fit mounting brackets provide attachment points for your SnowBear Hydraulic or Winter Wolf snowplow
• 2-Point brackets mount to existing holes in your vehicle's frame
  • 2 Points of attachment provide a sturdier and stronger connection with the plow
  • Bolt-on installation with included Grade 5 hardware
  • Some minor drilling or filing may be required
• Hidden design means brackets and crossmember won't protrude beyond bumper
• Sturdy and durable steel construction
• Corrosion-resistant black powder coat finish

Vehicle-specific brackets required to mount SnowBear Hydraulic or Winter Wolf snowplow.

397-053 Snow Bear Custom Mounting Brackets for Hydraulic and Winter Wolf Snow Plows