2013 Hyundai Santa Fe Roof Rack by Rhino Rack

Roof Rack Includes:

Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 54" Long - Qty 2
Rhino-Rack SRB Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4

Part Numbers: RRVA137S-2,RRSX032

Retail:$435.00

Our Price: $418.50

You Save: $16.50

This item qualifies for Free Shipping


In Stock
Roof Rack RRVA137S-2 - Aero Bars - Rhino Rack
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos




Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 54" Long - Qty 2
part number: RRVA137S-2

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

  • Sleek, low-profile crossbars let you build an aftermarket roof rack for your vehicle
    • Rhino-Rack legs and custom fit kit create a complete roof rack
  • Slim, elliptical crossbar shape helps to create an extremely aerodynamic system
  • Full-length bars extend past roof rack legs to maximize space for carriers and accessories
  • Top channels let you add channel-mounted carriers and accessories
    • Clamp-on accessories mount conveniently around bars
  • Rubberized Vortex strips in top channels dramatically reduce drag and wind noise
    • Keep dirt and grime out of crossbars
    • Provide cushioning and slip resistance for your cargo
  • Bottom channels allow easy installation to Rhino-Rack roof rack legs
    • Rulers in channels help to center crossbar on your roof
  • Lightweight, structural-grade anodized aluminum bars are rustproof
    • Internal H-shaped extrusion provides exceptional bar strength
  • Plastic lock cores with universal keys deter theft of channel-mounted accessories
    • Can be upgraded to all-metal locks (RRVA-LEC4 - sold separately) for added security
  • Matte silver finish


Specs:

  • Quantity: 2 crossbars
  • Weight capacity: 165 lbs
  • Dimensions: 54" long x 3-1/8" wide x 1-3/16" tall
  • Limited lifetime warranty


Rhino-Rack Vortex Aero crossbar

These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.


Aerodynamic Design

Vortex Aero noise-reducing top channel strips

The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.


Strong, Durable Construction

Vortex Aero crossbar H-shaped extrusion

The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.


No-Hassle Installation

Rhino-Rack Vortex Aero bottom channel ruler

Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.


Channel-Mounted and Clamp-On Accessories

Rhino-Rack Vortex Aero crossbar top-channel strips

Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channels capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.


You can also attach most clamp-on accessories to the bars, and the Vortex strips provide shock-absorbing, no-slip cushions for any accessories that rest on them.


Built-In Security

Rhino-Rack Vortex Aero Secure Core locking endcaps

Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).



VA137S Rhino Rack Vortex Aero Aluminum Cross Bars - Silver - 54" Long - Qty 2





Rhino-Rack SRB Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4
part number: RRSX032

Durable nylon legs with built-in locks let you mount Vortex Aero crossbars to your vehicle's factory flush side rails. Integrated handles tighten legs to rails for easy installation. Pair with 2 crossbars to create a complete roof rack.

Features:

  • 4 Legs let you mount Rhino-Rack Vortex Aero crossbars on your vehicle's factory flush side rails
    • Pair with 2 crossbars to create a complete roof rack
  • Custom-fit clamps and rubber pads securely grip your side rails
  • Easy installation with integrated tightening handles
    • Simply turn handles to tighten legs to rails
  • Keyed-alike steel locks secure legs to roof
  • UV-stabilized, glass-reinforced nylon is durable and weather resistant
  • Limited lifetime warranty


SX032 Rhino Rack SRB Legs for Vortex Aero Cross Bars - Flush Factory Side Rails - Qty 4





Video of Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 54" Long - Qty 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rhino Rack Roof Rack Review - 2013 Hyundai Santa Fe

Today on our 2013 Hyundai Santa Fe we'll be taking a look at and showing you how to install the Rhino Rack Roof Rack System. This is going to consist of the Rhino Rack Vortex Arrow Cross Bars, part number RRVA137B-2, the Rhino Rack 2500 Series Legs, part number RRRLKVA, and the Custom Fit Kit for our Santa Fe, part number DK360. Now, keep in mind our cross bars are also available in silver, part number RRVA137S-2. The Rhino Rack Roof Rack System is going to be a great solution for carrying your vehicle accessories on your roof, whether those are bike racks, cargo baskets, ski and snowboard carriers, or kayak carriers. The aerodynamic shape of our bar as well as the weather strip on the inside is going to help to reduce wind noise and drag. We can also remove that weather strip, cut it down, and place in channel mounted accessories. The end cap has a plastic lock core which can be replaced with an all metal lock core to help prevent theft and tampering of your channel mounted accessories. The locking cover on our foot pack is going to prevent any theft or tampering of our roof rack system as a whole.

Under there you'll see our fit kit. This is going to be custom cut to our vehicle, and any portion that touches our vehicle is going to have a rubber coating to prevent any scratches or abrasions. This being a custom cut fit kit, it's going to give us a nice, secure fit on our Santa Fe. The Rhino Rack Roof Rack System has a 165 pound weight capacity and comes with a limited lifetime warranty. It's going to be quick and easy to install. We'll show you how to do that now.

We're going to have two cross bars. We'll get four foot packs. We already have one of our back ones installed. We're going to get four pads and four clamps for our fit kit, four end caps for our cross bar as well as the key to tie that down. We're going to have keys for our end caps for our foot pack, and that's going to secure that down.

Then we have our included tool to tighten everything down and make sure we have a nice, secure fit. To begin, we're going to take our foot pack and remove our bolts here in the center. We'll place our clamp over the top and we'll start to tighten that down. We're going to tighten that bolt down just enough so that our clamp is held into place. Then we can flip our foot pack over, take the plastic piece off. Make sure that the arrow on the rubber and on the plastic are facing the same way.

We want them pointing towards our clamp when we place them back onto our foot pack. Now we're ready to slide it onto our cross bar, sliding it into the channel. We'll measure out this inside strip here to 13.7 centimeters. Then we can tighten down the bolt here in the center using our included tensioner. Now, with our kit you will get inserts that actually have the measurements on there. You can cut these down and place them into the channel. This is going to help to prevent any wind noise or drag, or any dirt and debris buildup underneath our cross bar. You can also use the excess and place it on the outside. Now, before we load this up we'll take our end caps for our cross bar and lock them into place. We're ready to load this up onto our vehicle. We'll now take our cross bar and gently set it across the roof of our vehicle, making sure that it sits around our door jam. The cross bar spread's going to be from the center of the front clamp to the center of the back, and that's going to be 70 centimeters. Once we have everything measured out we can come to our clamp, and we're ready to tighten it down. I like to hold my clamp just up against the door jam and tighten down my bolt until it holds that in place. Then we'll go back and forth tightening it down evenly until it's completely secure. Now, we'll know when our roof rack is completely tight when the skinnier portion of our torque tool is straight, just like so. Now we can close up our doors. Lastly, we'll take our end cap, place it onto our foot pack, lock that into place. Now we're ready to load up our accessories and hit the road. That's going to be our completed look at the Rhino Rack Roof Rack System on our 2013 Hyundai Santa Fe.



Customer Reviews

Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 54" Long - Qty 2 - RRVA137S-2

Rhino-Rack SRB Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 - RRSX032

Average Customer Rating:  4.8 out of 5 stars   (541 Customer Reviews)

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. Durable nylon legs with built-in locks let you mount Vortex Aero crossbars to your vehicle's factory flush side rails. Integrated handles tighten legs to rails for easy installation. Pair with 2 crossbars to create a complete roof rack.

- RRVA137S-2
by: Kenneth02/14/2018

Purchased a Rhino Rack custom fit rooftop system, along with the kayak rack to hold two kayaks and the Swagman rv bike rack. Made several trips and they all work great! Included photos to share. 475959



- RRSX032
by: Dustin03/02/2018

Just bought these for my 2018 Hyundai Santa Fe Sport And they look great! I don’t know why someone would pay double the price for the Thules when these look exactly the same. Great product! 480516



- RRVA137S-2
by: Kurt B08/23/2016
2013 Ford Explorer

Installed on a 2013 Explorer. Went on perfectly with the SXB legs. Bars extend past the legs 3" for a very nice appearance. Silver bars/black feet on a silver Explorer is perfect. Will likely use the bars to mount a cargo carrier on (16-18 CF) but haven't done it yet. Just the most faint/slight whistle at 65 MPH. Can only be heard with no radio on. Absolutely no issue. Solid as a rock. 286955



- RRVA137S-2
by: Jason D.06/16/2013
Toyota FJ Cruiser

These slick looking, quality made, aluminum, aero bars came with the RLCP25 kit, to fit my FJ Cruiser. It didn't have the big, bulky, useless for carrying much of anything factory rack. I like the look of the full size racks/ baskets, but didn't want to spend $800 + truck freight to get one. These cross bars are perfect for carrying my 14' canoe, plus whatever else with various cargo carrying accessories. They are light, yet combined carry near 100+ lbs. of gear. There is a rubber strip in the top slot, bottom slots and plastic strips to seal those, once you slide the feet in the correct distance to be even on both sides for your vehicle, and black, plastic end caps to finish it off. You'll need a tape measure and 10mm socket wrench to attach to the feet, then re-tighten periodically for safety. They look great on mr ride, and I can deal with the rubbing/ humming sound, after putting them on, although it does sound like my tires rubbing the fender wells... 84838


Comments

Im still loving the Rhino Rack setup, including the Nautic 581 saddles. They bars were easy to remove for winter snow clearing, and to put back on in the Spring for my new kayak. The rack and straps all work great, and I recommend etrailer to anyone that asks where I got it.

Jason D - 08/06/2014

6096
Comments

Thanks for your review Jason. Ive been searching for an option to transport kayaks on my naked FJ and your review sealed the deal. Now Im off to buy kayaks. :-

-- comment by: Dave - 08/31/2014

6586

- RRSX032
by: Michael K10/24/2016

Purchased the RRVA137-B and RRSX032 for my 2017 Hyundai Santa Fe with flush factory installed rails. Processing and shipping of order was prompt. Items were shipped inside large box to protect bars and legs. Installation was easy and fit was perfect. The Rhino Vortex Aero bars are high quality, with exception on the plastic end caps. The SRB legs are also high quality with exception of plastic locks. If possible I'm going to change out the plastic locks. Worried more about stripping out the plastic teeth. However, even with plastic locks the bars and legs are secure in lock position. After installation I took the Santa Fe on a test drive to listen for road/wind noise. Never exceeded 55 mph. No road noise at 55 mph. I rated my purchase 5 stars, even with plastic locks. The rating also included the customer excellent customer service and prompt processing and shipping. 310146


Comments

Really enjoying my roof rack. Yes, its been just over a year since my purchase. Rack has held up great, no issues. Has survived numerous Texas severe storms and numerous high speed 80mph trips from San Antonio to Tucson Arizona. Rack does surprisingly well in high wind events and high speed. Simply put, install it correctly and it ll handle your everyday hauling needs. Oh yeah, it looks great to on my Santa Fe.

Michael K - 11/01/2017

30240

- RRSX032
by: John A04/03/2015

By far the best price/ value in a quality rack for the Hyundai Santa Fe Sport, and etrailer has the best price on the internet. Have a look at the Thule, but I can't imagine that anyone with common sense would choose the Thule over the Rhino rack system. The Thule has far less carrying capacity and costs a lot more. The Rhino Rack has the highest load carrying capacity among it's competition and is designed to work specifically with the mounting system that is factory stock- i.e., the factory rails on the roof have a 3 position mounting hole system that locates the Rhino rack and also greatly adds to the strength and stability. I would add that when assembling and mounting them, pay very close attention to two things: 1. As shown in step #1 in the printed instructions, there is a cam that has to be inserted *inside* the cross bar, not under it. It takes some effort and attention to position it properly and ensure that the the cam does go up inside the bar when the foot is slid onto the bar, but you have to, the legs will not clamp to the cross bar if it is not. 2. As shown in step #3, the small pin on the metal plate of the leg has to go firmly and completely into one of the 3 holes on the factory roof rail. When I first did it, it was in a little, but not seated firmly, so the rack was not attached securely to the car, even though it was tightened down all the way. Glad that I looked closely and re-did it correctly. You have to wiggle the plate and pin until you feel it pop into that hole, then hold it there with one hand as you tighten down the lever to secure it with the other. When correctly fastened, the Rhino Rack has no play or looseness- it is attached very firmly. Also, I have the panoramic sun roof on my Santa Fe, I can confirm that you can open and close the sunroof without any problems with the rack mounted- there is plenty of clearance. That may change depending on which accessory you attach to the rack. This is a 2015 Santa Fe Sport. I am doing a renovation on a house I bought recently so I haul a lot of lumber etc from the hardware store. I was concerned when I replaced my Cherokee with the Santa Fe, that I would not be able to carry lumber and sheet goods, but with the Rhino Rack, I can carry everything that I need on top, securely. Seems easy to get on and off, once you installed it the first time and established the position of the legs on the bars. I'll put it on when needed to carry something, then keep it safe and out of the hot sun in the garage when not in use. Probably a good idea to take a label maker and add small tags on each bar in a hidden place to indicate which bar goes front and rear- also left and right for each, so you can re-install with minimal confusion. 182742


Comments

John, great review. I need the rack to carry my 9-6 longboard. Since my Hyundai as flush side rails. Im a little worried about uplift caused by wind getting under my board. I dont really want o see my long board sailing down the highway. Do you think the mounting brackets are sufficiently strong enough to transport my board?

-- comment by: Tony M - 03/16/2016

17139

- RRVA137S-2
by: Brittany07/20/2019
2014 Jeep Cherokee

I bought these racks for my 2014 Jeep Cherokee, and am incredibly pleased with everything! They were easy to assemble and get on the car, coming with fairly straightforward directions. We had them on in about an hour and a half. And the Aero design is great! No whistling or drag, and made it a lot easier to get my SUP around? Would absolutely recommend! 674221



- RRSX032
by: dean07/13/2019

product is good but the instructions were terrible. took me hours to figure out how they went on. a video upload would be most helpful. 669883


Comments

We do have a couple of installation videos available. You might check out this one.

-- Rachael H - 07/19/2019

57995

- RRVA137S-2
by: Sam07/12/2019

Great item, pretty easy to install. No issues with whistling during a 500 mile highway trip with two boats. Ironically, the only noise was from the Yakima Jaylow, when it was folded down with no boat attached. I posted a longer review for the full setup on our 2019 Highlander with 2 biggish kayaks under reviews for the rack pillars, Item: RRRCL4. When fully tied down, we used hood loops front and rear for both boats. Great service from Carol C. 669380



- RRSX032
by: Kevin07/09/2019

Fits perfectly. Installation requires focus. Getting that Aero crossbar mounted just right was a little bit tricky because of the metal cam engaging the slot. Once I wrapped my brain around how that was supposed to work, they went on super solid. If you don't get the metal cam in place - it will make it nearly impossible to get this mounted correctly to the flush mounted rail. Read the Q&A - its covered extremely well in there. I do like the lock and key but they are not the best quality. I think if someone wants to take it they could do so with little effort. So far, I'm quite happy overall. 668226



- RRVA137S-2
by: James04/12/2019
Ford Escape

Great product. Installed on Ford Escape with no problem! 625615



- RRVA137S-2
by: Gary04/11/2019

Just received the parts. Haven't installed yet, so don't know about fit, quality, performance. Salesperson was helpful. 625542



- RRSX032
by: Craig03/04/2019

I was unable to successfully attach these mounts with the Rhino Rack Aero Crossbars to a 2015 Hyundai Santa Fe with factory side rails. After four hours of trying with help from another person, we could not get them to attach and stay tight. I looked for help on the website but the relevant example was not there and I gave up and returned them. It appears that all these products come with pictographs for instructions. Universal but not always that easy to decipher in real time and place. The quality of construction was just fine and the price very competitive but that wasn't enough. 610243



- RRVA137S-2
by: Toni12/01/2018

Fit is good, sturdy rack, video instructions are great and easy to put on. Locks are not that great but will work for me. If someone really wanted to get to the bolt they could easily break the lock covers but then they would have to have the correct wrench. I would still recommend this as a great after market rack. 588056



- RRSX032
by: Paul06/27/2018

The rack fit perfectly! Great service from etrailer.com. I'm a regular now. 527403



- RRVA137S-2
by: Paul06/09/2018
2010 Subaru Legacy

Great, sturdy, good looking bars. Very easy to install. 519548



- RRVA137S-2
by: James D.05/26/2018
2017 Hyundai Santa Fe

I love these roof racks. I have used them to carry two kayaks. They are strong and reliable - and good looking! 513045



- RRSX032
by: James D.05/26/2018

The Rhino-Rack Legs for Vortex Aero Crossbars have performed very well. They are easy to mount on the vehicle and are strong and reliable. I am very satisfied. 5 stars! 513042



- RRVA137S-2
by: James D.05/26/2018

The Rhino-Rack Legs for Vortex Aero Crossbars have performed very well. They are easy to mount on the vehicle and are strong and reliable. I am very satisfied. 5 stars! 513043



- RRVA137S-2
by: Pete M.05/18/2018
2018 Toyota Highlander

Love the racks. Pretty easy to install. 509647



- RRVA137S-2
by: Jesus04/02/2018
2017 Acura RDX

Great product.. 491698



- RRVA137S-2
by: Chris D.12/17/2017
2010 Lincoln MKT

It was easy to install and I was amazed that the fitting for my 2010 Lincoln MKT was perfect the cons that when I reach 40 mph the whistle begin even with the aero shape, Maybe if you would send enough rubber strip to cover the entire gap, it may stop 460876



- RRVA137S-2
by: Harry12/08/2017
2018 Toyota Highlander

Received Rhino roof rack for Toyota Highlander, 2018. Rapid delivery, easy assembly but takes an hour or so. Like the feature that racks are easy to put on and remove, after installation of custom mounting brackets. With this type of straight rack i have no desire to leave on all the time. Perfect for my application of occasional use for Kayak, lumber, doors, etc. 458520



- RRVA137S-2
by: Paul11/27/2017
2013 Chevrolet Silverado

I selected this product from etrailer.com because it was a great fit for my truck and a very good quality rack system. I am using one of the racks for the cab of my 2013 Chevy Silverado to support one end of our kayak's and utilizing a different style rack for the rear of the truck bed. I have custom toolboxes in the bed of the truck which prohibit me from using a complete ladder rack system for the kayak's. etrailer provided great service and fast shipping. The packaging was great as well. 455057



- RRVA137S-2
by: Andrew11/14/2017

Product looks great but came with no guide for my vehicle. This made installation take a little longer. The plastic plate that goes in the channel to eliminate wind noise must fit just right and that's where the guide comes in. The guide gives you the measurement for your vehicle. 452031



- RRVA137S-2
by: Robert10/26/2017

In order to make a final decision on selecting a rack for the roof of the car I contacted a trailer representative by telephone and found him to be extremely helpful, personable, and courteous. The rack was ordered Friday afternoon and promptly arrived late on the following Tuesday, a very short time for free delivery! At this time I have not tried to install the rack but it appears all of the necessary parts were delivered and I am very pleased at the excellent service I received from etrailer. 446369


Comments

The rack has worked out very well. It is easy to install and remove and is very secure when attached to the roof. I am always confident that the rack will perform without causing any problems and it is nice to have peace of mind when you are traveling at a high speed.

Robert - 10/26/2018

45087

- RRVA137S-2
by: Mike C.03/10/2017

I followed install instructions very closely, pretty straight forward, but you have to ensure you measure twice and cut once. Not a complicated install but how well you do it determines the performance of the rack. Test drive showed it to be very quiet at city and high way speeds. A paper tape measure should be included with install kit, who has anything in the USA the measures millimeters or 32nds of an inch. Would definitely recommend product, feel it is sturdy and durable. Will meet my needs to carry RV equipment and a canoe if needed. 350888



- RRVA137S-2
by: Les J.12/25/2016
2014 Kia Soul

I bought the Rhino-Rack for my 2014 KIA Soul "with a sun roof" and my wife and I installed it in about a half hour. it was soo easy and fits like it was manufactured just for my car. Everything I saw said that it was not for cars for the sun roofs but i measured and checked several friends before I ordered and bought and there looks to be no problems. It fits very well and the clearance is very sufficient. I can now carry my wood or kayaks or larger stuff around. 327874



- RRVA137S-2
by: Winston Lee12/13/2016
2016 Toyota Highlander

Looks good and sturdy. But the end of aluminium bar should have been sanded. It's very sharp. Accidently it made a tiny scratch on my left finger with a little bleeding. Please be careful when you assemble this crossbar. 324709



- RRVA137S-2
by: Gerry G10/18/2016
2007 Ford Edge

Product was what I was looking for, good price, fast delivery excellent service. 308361



- RRVA137S-2
by: Richard F.09/15/2016
2013 Honda CR-V

I purchased this rack for a "new to me" Honda CRV. I chose it for three reasons: the design is supposed to minimize wind noise, it is rated for a significantly higher load weight than many others, and the price was very reasonable. It also happens to be very nice looking. Assembly was pretty straight forward. I assembled the two units on the dining room table in about 45 minutes. It could be done much more quickly but I think it's good to take your time and read the instructions carefully. Mounting on the car roof was quick - about 15 minutes. Some reviewers complained that only two crossbar end caps locked. That was not the case with mine. All four locked into place I haven't driven the car on the highway yet, but there was no added noise driving around town. Etrailer shipped promptly, and all the required components were included. 295702



- RRVA137S-2
by: Bitoy09/03/2016
2016 Honda Accord

I will not review about the performance of this bar. Just installed it but for the look? So clean and fits perfect. Pics to follow 290738



- RRVA137S-2
by: Mark03/10/2016

The rack system is fantastic because it is strong, and easy to attach at the beginning of trips and to unattached at the end of trips. The customer service representatives were incredibly helpful and spent copious amount of time helping me decide the best system for my car and their jovial nature and good heartedness were wonderful. 240500



- RRSX032
by: Jack P.08/26/2015

Fast shipping, advice on rack fit perfect, great service 221823


Comments

Great rack, thanks

Jack P - 08/31/2016

20693

- RRVA137S-2
by: MerryO08/06/2015

The vehicle-specific instructions made for a perfect fit! The Vortex Aero bars look great on my shiny new vehicle. Haven't loaded them up yet, but they are rated for way beyond the limits of what I plan to load. 217184



- RRSX032
by: John K07/22/2015

Easy to install, looks good. Haven't really put it to the test, yet. The sunroof on my 2015 Hyundai Santa Fe still works with the rack in place. Will see if that is still the case once the roof cargo carrier is in place. So far, very pleased 213575



- RRVA137S-2
by: Bill B06/05/2015

This is by far the best designed rack system i have ever put on a car. Took 20 minutes to install and had an extremely secure fit. It also came with measurement guides on all sides to equal out the rack when installing. 200761



- RRVA137S-2
by: phil a04/05/2015

everything as discribed. hope to use as is for single kayak. 183347



- RRVA137S-2
by: Christian D03/30/2015
2009 Scion xB

Assembled and put on roof rack last weekend. Assembly and setup took about 45mins. Wasn't very difficult. Product seems sturdy and well made. 181444



- RRSX032
by: Ron M03/12/2015

I have a 2015 Hyundai Sport with the Ultimate Package. I ordered the Rhino-Rack SRB Leg and black Aero Crossbars. The rack was received within 4 to 5 days which is acceptable. The install was quite simple and the rack looks great against the silver car color. 178100



- RRSX032
by: Nils02/24/2015

It seems solid and looks great. I was hoping for a Thule/Yakima quality rack at half price but its too early to tell. It definitely looks just as good, but the towers are some sort of thermo-plastic versus metal so only time will tell on durability. I got one silver and one black rail so I'm waiting to do half of the install. etrailer was great and shipped out the missing black leg before waiting for the return of the silver one. The tower have pegs that match the rail holes in my santa fe so that definitely beats the other racks which just squeeze the rails. 175896



- RRVA137S-2
by: Rob S01/19/2015

Rhino-Rack looks good and is solid. Good instructions. 170428



- RRVA137S-2
by: Ron B.01/08/2015

Very pleased. Easy to install with well written instructions. Just what I was looking for. 168144



- RRVA137S-2
by: Andre11/26/2014
2001 Toyota Land Cruiser

Looks very strong. Perfect fit for Toyota Land Cruiser 2001. Thanks for great price a service! 162474



- RRSX032
by: Bruce J.10/04/2014

Just got car top rail set {Rhino-Rack} for a 2014 Hyundai Santa Fee Sport with a panoramic roof window. I also added the Lock Set for the rails in a separate order and then the magnetic holder for the four prong trailer hitch wiring. Ordering was a snap and they fit perfectly. I am extremely satisfied with the eTrailer experience, and recommend them to all. R/ - Bruce J.. 154462


Comments

Nice to hear, Bruce...I have the 14 Sport with pano roof, and read a lot about most racks not compatible with the glass roof...You seem to be happy with fitment.... And, you can open the roof no problem, obviously with nothing hanging below racks, right??

-- comment by: George M - 04/03/2015

10553
Comments

I have since installed the rhino areo bars with the feet and a set of locks....works just fine, and looks great.Happy with my purchase

-- comment by: George M - 05/07/2015

11476

- RRVA137S-2
by: Boilershot07/03/2013

Great product! excellent packaging and installation instructions. Going to buy another one because the XXL Rhino Roof basket recommends three bars. 87495



- Y02-490
by: John W07/24/2019

Review from a similar Rhino Rack Vortex Aero in Roof Rack


Rack was easy to install worked great for hauling my kayaks. There was an issue with some hardware missing but the replacement was sent quickly. 674646



- Y02-480B
by: Scott06/30/2018

Review from a similar Rhino Rack Vortex Aero in Roof Rack


THE GENIUS OF A PERFECT SOLUTION It is not very often that a purchase for something as mundane as a utility device stirs such awe inspired appreciation and praise. I have just completed the installation of the RLCP Rhino Heavy Duty Canopy/Hard Tonneau Track Mount atop my A.R.E. Camper Shell. I am amazed at the attention to detail of each and every part which has been carefully engineered and perfectly manufactured. I am truly impressed by the genius of a perfect solution to my roof top cargo handling needs! From the mating surfaces of the injection molded towers and the lightweight, but durable extruded anodized aluminum crossbars, to the gentle contour of the rail stock to the camper rooftop, every single part has form, fit and function! The finished product is beautiful, durable, convenient, and for the money invested, economical. I give Five Stars of Praise to the Aussie friends at Rhino-Rack Australia Pty, Ltd. Equally praiseworthy is the superb performance of e-trailers, Inc. These folks distinguish themselves from the competition through their superior attributes of website presentation, pricing, order fulfillment and package integrity. This is a unique distribution partnership which is imbued with the highest standards of e-commerce. Job well done, everyone! 528546


Comments

Perfection in every sense of the word!

Scott H - 06/30/2019

57284

- RRVA118B-2
by: Richard06/23/2019

Review from a similar Rhino Rack Vortex Aero in Roof Rack


All the Rhino Rack products listed, ie Nautic kayak carrier,anchor straps,2500 series legs,and Vortex crossbars were shipped extremely quickly by etrailer, with exceptional customer assistance, and were all found to be of the highest quality materials. Installation was relatively simple with an assistant and the video by Rhino Rack was a valuable tool...once on my car, the system proved to be safe, secure and as sturdy as I could hope for. I would certainly recommend Rhino Rack systems in future, and will certainly rely on etrailer for any of my future needs. 662698



- RRVA126S-2
by: Alex M.09/20/2015

Review from a similar Rhino Rack Vortex Aero in Roof Rack


Great roof rails. They sit relatively low to the roof; which combined with the Aero profile give a great look. 226575


Show More Reviews
671
671


Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?


  • Does Rhino Rack Roof Rack Vortex Aero Crossbars Fit 2017 Ford Explorer with Flush Rails
  • What you are describing is a flush rail installed on the roof of your 2017 Ford Explorer. The Rhino Rack roof rack part numbers # RRVA137S-2, # RRRCH4, and # RRRCP45-BK is confirmed as a fit for exactly what you described so this would fit and work well for you. I attached an install video for this rack on a similar Ford Explorer as yours for you to check out as well.
    view full answer...

  • Roof Rack Recommendation for 2017 Infinity QX60 for Carrying Thule Hullavator
  • For your 2017 Infiniti QX60 with a naked roof the Rhino Rack part numbers # RRVA137S-2, # RRRLKVA, and # DK339 is a confirmed fit. This would work well with the Hullavator part # TH898 as well so it would be a great choice.
    view full answer...

  • Roof Rack and Kayak Carriers for 2012 Nissan Murano
  • I can help you get everything you need to carry a pair of kayaks on your 2012 Nissan Murano with a naked roof. Starting with the roof rack, I highly recommend the Rhino Rack Aero Roof Rack, which consists of Vortex Aero Crossbars # RRVA137S-2 as well as Mounting Legs # RRRLKVA and Custom DK Fit Kit # DK205. This is a high-quality rack that features aero bars to give you a quiet ride and the bars include locks to help prevent theft. To carry a 12' and 14' kayak I recommend the Yakima
    view full answer...

  • Can Replacement Roof Rack be Added to 2018 Infiniti QX60 That Already Has Factory Roof Rack
  • There are no aftermarket crossbars that will work on your 2018 Infiniti QX60 that already has a roof rack. The only way to add a roof rack is to have your entire factory roof rack assembly removed - the crossbars and rails - and convert your QX60's roof ro a naked roof. Only if you did that would you be able to utilize a roof rack, and there is one with 54 inch crossbars that would fit a 2018 Infiniti QX60 with a naked roof; the Rhino-Rack Vortex Aero Crossbars come in either Black #
    view full answer...

  • Will RockyMounts SwitchHitter Bike Rack Fit Channels of Rhino Rack Crossbars
  • The Rhino Rack SwitchHitter part # RKY1270 does come with T-slot adapters and would fit into the channel of the Rhino-Rack Vortex Aero Crossbars # RRVA137S-2 that you referenced.
    view full answer...

  • Roof Rack Kit for a 2015 Ford Escape With a Naked Roof
  • You have a lot of great options for a 2015 Ford Escape with a bare roof. I recommend the Rhino Rack Vortex kit, consisting of: Rhino Rack Vortex Aero Crossbars, 54 Inches, Silver, part # RRVA137S-2, or Black, part # RRVA137B-2 Rhino Rack 2500 Series Legs, part # RRRLKVA Rhino Rack Fit Kit 2500, part # DK375 These are a great balance of compatibility, ease of installation and value. Their aero shape is quieter than other crossbar designs and with the included T-Channel, can use
    view full answer...

  • Measurement of Rhino-Rack Vortex Crossbars to Determine if Longer Bars Can be Used
  • The metal strip between the tracks that slide onto the legs of the 59 inch Rhino-Rack Vortex crossbars, part # RRVA150S-2, is about 902 millimeters (or 35-1/2 inches). The same measurement on the 54 inch bars, part # RRVA137S-2, is about 775 millimeters (or 30-1/2 inches). The tracks that slide onto the legs are the same on both bars. They're about 298 millimeters (or 11-3/4 inches). You should be able to measure across your vehicle's roof from where the legs fit to determine if
    view full answer...

  • Roof Rack Recommendation for 2014 Infiniti QX60 with Naked Roof
  • For your 2014 Infiniti QX60 we have roof rack options. But none of them are for flush rails that run front to back. They are instead for raised rails or a totally naked roof. Can you send me a picture of your roof? Most likely yours would fall under the naked roof category and would require a rack like the Rhino Rack # RRVA137S-2, # RRRLKVA, and # DK339.
    view full answer...

  • Will Drilling into Roof to Install Roof Rack Affect 2016 Ford Transit Connect Air Bags
  • The Rhino-Rack tracks that fit your 2016 Ford Transit Connect passenger van, # RRRTS535, are meant to install in a specific location indicated in the instructions. Rhino-Rack has done test fits and has not found that installation of the roof rack interferes with the air bags in the van if installed according to the installation instructions. A link to the installation instructions is included on this page for reference.
    view full answer...

  • Weight Capacity of Rhino-Rack Vortex Aero Roof Rack for 2014 BMW X5 # RRVA137S-2 and # RRSX024
  • Roof rack manufacturers like Rhino-Rack design racks that will fit more than one vehicle and naturally there are variances in how much weight any given vehicle can handle. In the case of the 2014 BMW X5 the maximum safe weight load for the rack consisting of parts # RRVA137S-2 and # RRSX024 is 165-lbs, unless your owner's manual or dealership advise otherwise. In another application on a different vehicle this rack may be rated for more weight, but in any case the lowest-rated item in a
    view full answer...

  • Folding Kayak Carriers and Roof Rack for a 2014 Hyundai Santa Fe Sport
  • For your 2014 Hyundai Santa Fe Sport to carry your kayaks, I recommend Rhino Rack's Vortex Aero kit as a roof rack. This kit consists of: Rhino Rack Vortex Aero Crossbars, 54 Inches, Silver, part # RRVA137S-2 or Black, part # RRVA137B-2 Rhino Rack 2500 Series Legs, part # RRRLKVA Rhino Rack DK Fit Kit for 2500 Legs, part # DK360 If you have flush rails on your vehicle, you'll replace the 2500 Series Legs and DK Fit Kit with the SRB Legs, part # RRSX032, which will clamp to
    view full answer...

  • Availability of Roof Rack for 2014 Hyundai Santa Fe Sport With Roof Rails and Panoramic Sun Roof
  • Rhino Rack offers a reasonably priced rack system for your Santa Fe Sport. The rack consists of the aluminum Vortex crossbars, part # RRVA137S-2 and the Leg Kit to attach to the side rails is part # RRSX032. This rack is a confirmed fit for your vehicle, and is compatible with the glass roof. I checked with Rhino Rack, and found that you CAN operate the sunroof with the crossbars in place, but any accessory mounted to the rack that extends below the crossbar might interfere. The Vortex
    view full answer...

  • Roof Rack and Ski Carrying Options for 2014 Jeep Cherokee with Bare Roof
  • Apparently, your Cherokee is a bit of an odd duck. The 2014 Cherokee usually left the factory with at least the side rails that run front to back along the edge of the roof to provide an attachment point for crossbars. Luckily, one of our roof rack vendors, Rhino-Rack comes stampeding to the rescue, with a rack option that's compatible with your Cherokee. To install a rack on your Cherokee, you'll need the following parts: Vehicle specific clamp kit, part # DK398 Aero style crossbars,
    view full answer...

  • Rhino-Rack Roof Rack for a 2015 Hyundai Santa Fe GKS with Side Rails that Run Front to Back
  • Since your 2015 Hyundai Santa Fe has the side rails that run front to back you can use Rhino-Rack roof rack black crossbars # RRVA137B-2 or silver bars # RRVA137S-2. Then you would only need foot pack # RRSX032. The bars are 3-1/8 inches wide and 1-13/64 inches tall so all of your accessories should fit around these bars. You will want to consult the vehicle owners manual or with Hyundai to determine the roof weight capacity prior to loading anything on the roof. A helpful accessory
    view full answer...

  • Will the Rhino Rack Aero Roof Rack Allow Panoramic Sunroof of 2013 Hyundai Santa Fe to Open
  • The Rhino Rack Roof rack for your 2013 Hyundai Santa Fe that consists of Rhino-Rack Vortex Aero Crossbars # RRVA137S-2 and Rhino-Rack SRB Leg Kit # RRSX032 has been confirmed to fit your 2013 Hyundai Santa Fe and will allow you to open your panoramic sunroof.
    view full answer...

  • Roof Rack to Carry a Thule Hullavator on a 2013 Infiniti JX35
  • From my research the 2013 Infiniti JX35 has the options of a complete roof rack or a roof that has small flush rails along each side of the roof, which is what it sounds like you have. All of the roof racks we carry for your roof style use clamps to the sides of the roof. I recommend the Rhino-Rack crossbars, parts # RRVA137S-2 in silver or # RRVA137B-2 in black. Then use legs # RRRLKVA and fit kit # DK339. These are nice aerodynamic crossbars to help eliminate wind noise. They'll
    view full answer...

  • Roof Rack Recommendation for a 2013 Honda Odyssey
  • For a roof rack that is a fit for your 2013 Honda Odyssey with the roof style you have you would want the Rhino Rack that consists of part numbers # RRVA137S-2, # RLT500-2, # RTC12JW, and # RRVA-FK2-2 which is a confirmed fit. You will need to do some minor drilling to install the included track so that the feet of the kit will fit it.
    view full answer...

  • Roof Rack Recommendation for 2012 Chevy Traverse for Installing Thule Hullavator
  • For your 2012 Chevy Traverse you would need a set of crossbars that have a channel mounted in the top of them like the Rhino Rack part numbers # RRVA137S-2, # RRRLKVA, and # DK297 which will work great with the Thule Hullavator part # TH898 that you are interested in.
    view full answer...

  • Roof Rack with 60-Inch Crossbars for 2013 Hyundai Santa Fe Sport
  • The Rhino-Rack 54-inch roof rack setup you referred to, parts # RRVA137S-2 and # RRSX032, is what Rhino-Rack recommends for your vehicle. My contact there said the 60-inch Vortex bars will not work on your car, but we do have other Aero style racks from Yakima with 60-inch bars that do fit well on the car. All such roof racks appear on the linked page. For a silver 60-inch crossbar rack for the Santa Fe Sport with flush mounted rails that run front to back use parts # Y00429, # Y00145
    view full answer...

  • Is Rhino Rack Roof Rack for 2015 Honda CR-V Compatible with Thule Hull A Port Pro
  • Yes, the Rhino Rack roof rack part numbers # RRVA137S-2, # RRRLKVA, and # DK284 that you referenced is compatible with the Thule Hullaport Kayak carriers you mentioned part number # TH848.
    view full answer...

  • Roof Rack And Tie-Downs For Surfboard On 2016 Hyundai Santa Fe With Flush Rails On Roof
  • As long as you use a good tie-down system on your Santa Fe you should not have a problem with the surfboard flying off. The roof rack I recommend is the Rhino-Rack Vortex. This features black aluminum aerodynamic crossbars that help to reduce wind noise and drag. for this roof rack you will need part # RRVA137B-2, and part # RRSX032. To carry the surfboard I recommend a tie-down kit like part # RRRWP03. This included 21-1/2 inch pads and 2 tie-downs to secure the board to the crossbars.
    view full answer...

  • Install Instructions for Locking Portion of Rhino Rack SRB Legs
  • For the Rhino Rack foot kit part # RRSX032 that you referenced I attached a link to the install instructions. I also attached a picture that I took from the install instructions that covers the locking portion of the rack.
    view full answer...

  • Tips for Attaching Rhino Rack Foot Kit to Raised Side Rails of 2017 Hyundai Santa Fe
  • It should not be difficult at all to install. That said we've had a customer come back and give advice on installing the foot kit part # RRSX032 that I'll pass on. 1. As shown in step #1 in the printed instructions, there is a cam that has to be inserted *inside* the cross bar, not under it. It takes some effort and attention to position it properly and ensure that the the cam does go up inside the bar when the foot is slid onto the bar, but you have to, the legs will not clamp to the
    view full answer...

  • Trouble Securing Rhino-Rack Vortex Legs to Flush Rails on 2017 Hyundai Santa Fe
  • The Rhino-Rack SRB Legs # RRSX032 along with a compatible set of Vortex Crossbars like # RRVA137B-2 are confirmed to fit your 2017 Hyundai Santa Fe that has the flush mounted rails. In doing some research, it does look like there is a particular step in the instructions that may cause some issues when trying to secure the legs to the factory rails. We have had a customer come back with a similar experience to yours and stated that during step 3 of the instructions (image attached),
    view full answer...

  • Verification that Rhino Rack RRX032 is Attached Properly on a 2014 Hyundai Santa Fe GLS
  • The picture you sent in of the Rhino Rack # RRSX032 on your 2014 Hyundai Santa Fe shows it installed properly from what is visible in the picture. I matches exactly what you will see in the install video I attached for this rack on a very similar Santa Fe as yours. Fast forward to the 2:26 mark to see it attaching to the rails.
    view full answer...

Info for these parts were:

Edited by:
Tyler C
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Hannah L
Written by:
Brian B
Video by:
Hayden R
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Hyundai Santa Fe Accessories