1999 GMC Yukon Roof Rack by Inno

Roof Rack Includes:

Inno Aero Crossbars - Aluminum - Black - 60" Long - Qty 2
Inno Through Feet for Aero Crossbars - Raised Side Rails - Qty 4

Part Numbers: INXB153-2,INXS150

Retail:$409.97

Our Price: $368.97

You Save: $41.00

This item qualifies for Free Shipping


In Stock
Inno Black Roof Rack - INXB153-2
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos




Inno Aero Crossbars - Aluminum - Black - 60" Long - Qty 2
part number: INXB153-2

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

  • Low-profile crossbars let you build a roof rack for your vehicle
    • Pair with Inno feet to create a complete roof rack
    • May also require a custom fit kit
  • Elliptical shape helps to create an aerodynamic system with no need for a fairing
  • Integrated T-slots make it easy to slide channel-mounted carriers and accessories onto the bars
    • Clamp-on accessories conveniently wrap around bars
  • Flexible rubber strips keep out dirt and allow for simple mounting in T-slots
    • Press down on strips and slide accessories into slots - no trimming required
    • Plastic coating on strips allows T-bolts to slide easily along channel
  • Bottom channels allow easy installation to Inno roof rack feet
    • Simply clip the foot into the crossbar and slide it along the channel
  • Lightweight aluminum construction is durable and rustproof
    • Internal extrusions provide exceptional bar strength
  • Glass-blasted powder coat finish resists corrosion, scuffs, and scratches
  • Matte black color


Specs:

  • Quantity: 2 crossbars
  • Crossbar dimensions: 60" long x 3-1/8" wide x 1-1/8" tall
  • Limited lifetime warranty


These low-profile Inno Aero crossbars let you build a stylish, aerodynamic roof rack for your vehicle. The crossbars require 4 Inno Flush or Through feet to mount the rack to your roof. You may also need a custom fit kit to mount the crossbars. Built-in T-slots in the tops of the bars let you easily mount carriers and accessories on the rack. Flexible rubber strips in the channels keep out dirt and require no trimming or adjustment. The crossbars are also constructed of strong yet lightweight aluminum so they won't rust.


Aerodynamic Shape

These lightweight bars have an elliptical shape. This aerodynamic, low-profile design helps to reduce wind noise and drag when you drive. This means you won't need to add a fairing.


Strong, Durable Construction

Inno Aero Internal Extrusion

Inno Aero crossbars are constructed of sturdy, lightweight aluminum. Internal extrusions add strength and structural rigidity without adding a significant amount of weight. The bars are rustproof so you can leave them on your roof all year long, wherever you go. The sand-blasted powder coat finish resists corrosion, scuffs, and scratches. And the matte black color will look good on any vehicle.


Slide-On Installation

Inno XS Slide On Install

Each crossbar has a channel in the bottom that lets you install Inno feet (sold separately). Slide the channel cover over to reveal a mounting hole for the foot. Clip the foot into the crossbar and then slide it into place along the channel. Built-in bar end stops in the channels will keep the feet from sliding off the ends of the bars.


Inno Aero Locking Stay

To complete installation, mount the feet to your roof. This may require a custom fit kit (depending on your application). Attach the locking covers (included with the feet) to secure the roof rack to your vehicle. Locking the covers also secures T-slot-mounted accessories to your crossbars.


Channel-Mounted and Clamp-On Accessories

Inno Aero T Slot

This bar has a built-in T-slot that allows you to mount bike racks, watersport carriers, ski racks, and more. The EZ-Slide rubber strip in the bar lets you mount accessories without the need to remove or trim the strip. Just press down on the ends of the flexible strip and slide your accessory's mounting hardware into the T-slot. This strip has a plastic coating so it's easy to slide T-bolts along the channel. The strip runs the full length of the bar, so it helps keep dirt out of the channel when you're not carrying accessories.


Inno Aero with Clamp On Accessory

You can also attach most clamp-on accessories to the bar, and the rubber strip provides a no-slip cushion for any accessories that rest on it.



INXB153 Inno Aero Aluminum Load Bar - Black - 60" Long - Qty 2





Inno Through Feet for Aero Crossbars - Raised Side Rails - Qty 4
part number: INXS150

These Through feet help mount 2 Inno Aero crossbars to your vehicle's factory raised side rails to create an extended-length roof rack. Steel straps wrap around rails and tighten with cam-action handles. Locking covers secure feet to side rails.

Features:

  • 4 Feet let you mount Inno Aero crossbars on your vehicle's factory raised side rails
    • Pair with 2 crossbars to create a complete roof rack
  • Through design helps create an extended-length roof rack that maximizes carrying capacity
  • Rubber-coated stainless steel straps secure feet to your raised side rails
    • Straps wrap around rails, hook into bottoms of feet, and tighten with cam-action handles
    • Rubber coating on straps protects rails from scuffs and scratches
  • Locking covers secure system to your roof
    • Also secure T-slot-mounted accessories to your crossbars
    • 2 Keys included
  • Durable, weather-resistant AES plastic construction
  • Easy, slide-on installation to channels in bottoms of crossbars
  • Limited lifetime warranty


XS150 Inno Aero Bar Through Stays for OEM Raised Side Rails - Qty 4





Video of Inno Aero Crossbars - Aluminum - Black - 60" Long - Qty 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Inno Aero Crossbars Installation - 2016 Acura MDX

Speaker 1: Today on our 2016 Acura MDX we'll be taking a look at and showing you how to install the Inno Roof Rack System. This is going to consist of the Inno Aero Crossbars measuring 60 inches long, with part number INXB153-2, the Inno Through Feet for Aero cross bars, part number INXS250 and the custom fit kit for our MDX, part number INK656.The Inno roof rack system, like most others, allows you to carry bike racks, kayak carriers and cargo baskets on your roof, and still have that aerodynamic shape that helps to reduce wind noise and drag. The Inno bars are also going to have the weather strip like most other cross bars. The only difference is that this one will push down and work with your channel mounted accessories, where others you actually have to remove that weather strip and cut it down. This is going to be easy to install. It's going to clamp around our door frame and lock into place.

This roof rack system has a 120 pound weight capacity, though you do want to double check your vehicle's owners manual to make sure your roof can withstand that much weight. It's also going to come with an easy install. We'll show you how to do that now.Now, everything on our table is what we will need to install our roof rack system. We already have our front bar installed and half of our back bar here. We're going to provide our own flat tape measure, but everything else will come in our kit.

We'll have our end caps for our feet, as well as the keys to lock everything down. The end caps for our crossbars, the tool to tighten everything down, the tool to tighten down our feet as well as the adapter to secure our feet to our crossbar, our feet themselves, a foam block which will go inside our weather channel at the bottom to prevent any wind noise or drag, and then our fit kit, both the clamp as well as the pad. We'll start by flipping our crossbar over.We'll be working on the driver's side of the crossbar. We'll start by taking the inside portion, and we're going to slide that all the way out to the end. We're going to take our adapter piece and line up this notch with the notch on our crossbar.

Place it in, and we can slide it back in. Slide it all the way in, push on the button, and slide it in the rest of the way until it hits the stopper here. We'll line up the small notch and the large notch with the two holes on our adapter. We can measure out the distance between our two feet. We're going to measure this out to 43 3/4 inches.

We're going to tighten down the bolt on the inside here, and this will secure our foot in place to our adapter. Now we'll take the pad from our fit kit. We're going to place it onto our foot. We want to line up the indentions with our bolts on the bottom and we'll just push it into place until we have a nice, secure fit. You do want to double check your instructions to make sure you use the correct pad for our front bar as well as our back bar.Now we can take our clamp. We're going to start by removing our bolts her on on our foot pack. Take the clamp and place it just over where our bolt was, and then tighten it back down enough so that it holds our clamp into place. We don't want it too tight. Now we'll take our foam spacer, place it inside the end of our crossbar until it makes contact with our foot pack. We'll take a knife, and we're just going to mark where the end of our crossbar sits, and we can cut off this excess here. We'll take our knife and we'll just cut right along that line. We can take the piece that we cut and place it back into the channel. Lastly, before we place this on to our vehicle, we'll take our end cap for our crossbar and push it into place.Before we load up our crossbar we want to open our doors, and we can gently place our crossbar onto our vehicle. To measure out our crossbar spread, we're going to measure from the center of our front clamp to the center of our back, and that's going to be 59 centimeters. Make sure we do the same measurement on the other side so that the other side is sitting 59 centimeters away as well. Now we'll take our included torque tool and tighten down this bolt here. We want to make sure we that we tighten down each side evenly so we have a nice, secure fit. Once we hear that click, that's when we know we have enough torque behind our bolt. Now we can take our end cap, place it onto our foot, lock it into place, and we're ready to load up our accessories and hit the road.That's going to be our completed look at the Inno Roof Rack System on our 2016 Acura MDX.



Customer Reviews

Inno Aero Crossbars - Aluminum - Black - 60" Long - Qty 2 - INXB153-2

Inno Through Feet for Aero Crossbars - Raised Side Rails - Qty 4 - INXS150

Average Customer Rating:  4.9 out of 5 stars   (19 Customer Reviews)

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming. These Through feet help mount 2 Inno Aero crossbars to your vehicle's factory raised side rails to create an extended-length roof rack. Steel straps wrap around rails and tighten with cam-action handles. Locking covers secure feet to side rails.

- INXS150
by: Robert07/18/2017

Rack looks great on the car. I've owned it for a year now and it is holding up very well. 407670



- INXB100-2
by: David06/19/2019

Review from a similar Inno Elliptical Roof Bars in Roof Rack


I originally went to buy these elsewhere but the listing was unclear as to the delivery date and they appeared to be selling a single bar. I found them on etrailer and the order process was smooth, the communication was good and the product arrived when they said it would. Also, they were slightly cheaper here than on the other site. My only suggestion... Dudes... chill with the staples on the box, other than that, I feel pretty good about looking here first the next time I need something for my car. 660097



- INXB108-2
by: Roger08/20/2018

Review from a similar Inno Elliptical Roof Bars in Roof Rack


..GREAT SERVICE ..thankU... 556662



- INXB108-115
by: Russell and julie07/12/2018

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Nice 540705



- INXB115-123
by: Dave P07/24/2017

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Well designed, excellent fit, and sleek aerodynamic wing design. They almost seem like they'd give the car a little lift while driving :). 410017



- INXB100-108
by: Steve07/11/2017

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Great fit, look and service 404460


Comments

The racks are working as expected, bikes and Thule box in the summer and ski holders in the winter

Steve - 07/11/2018

40838

- INXB100
by: Rowell05/22/2018

Review from a similar Inno Elliptical Roof Bars in Roof Rack


The quality of this product is 5 start and fit exactly with my 2017 nissan rogue.. 511906



- INXB115-2
by: Lori W.08/13/2018

Review from a similar Inno Elliptical Roof Bars in Roof Rack


By far the best service I have received in a very long time. I recieved my inno flush feet areo crossbars, sooner than expected and the assembly was just as specified. I especially liked having the video with the tutorial. I like the look of the low profile and the quality is outstanding. I have used this for my kayak and the low profile helps with the loading and unloading. I would highly recommend this product and Company. 553354



- INXB108-2
by: Eli F.12/30/2017

Review from a similar Inno Elliptical Roof Bars in Roof Rack


This inno rack fits well with my car. I installed a cargo box with it. The roof rack is well built and sturdy. 463871



- INXB115-2
by: Greg S07/17/2017

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Everything about this kit met my expectations. - Perfect fit for my Ford Edge, as advertised. - Lowest bar height that was still high enough for the Edge Vista roof to clear. The glass does clear when nothing is attached to the bars. - Aero bar shape. I haven't done a lot of miles yet with only the bars and no other attachments. I attached an Inno roof box (which still fits through my garage door!) and did a 2000 mile road trip at insterstate speeds. Except the box noise (expected), and a bit of a mileage hit, I had no issues. Secure fit the whole way. 407245



- INXB138-2
by: Debbie11/12/2018

Review from a similar Inno Elliptical Roof Bars in Roof Rack


We recently purchased 2 kayaks & Thule roof racks from our local outdoor store. After waiting 2 weeks for our roof racks and J bars to come in we found that the Thule racks did not fit our 2017 Lincoln MKX and they didn't make any racks that would. The vehicle does not have roof racks and has a moon roof. After a couple of days searching the internet we discovered etrailer.com. We found the Inno roof racks, but still was not sure they would work. We spoke to a repesenative and he assured us that the racks we chose would fit and the Thule J bars we did return would also work. As you can see by the photos 2 days later we were happy Kayakers. 582489



- INXB130-2
by: Antonio11/20/2019

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Product is great. Fits perfectly with some minor measurement adjustments. Can be assembled by one person, but helps to have two. Bought the complete roof kit and well as the Inno 80 basket for a Mazda CX3, took about two hours to assemble everything. 726767



- INXB115-2
by: Tab07/03/2019

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Very happy with purchase. This third rack system I have purchased ( for different vehicles) and first Inno system. Seems every bit the quality of my Yakimas and like the attachment portion to roof rails, everything is coated so no possibility of scratching paint on car. Delivery was very quick and Etrailer price matched Amazon! 666609



- INXB123-130
by: Thomas06/03/2019

Review from a similar Inno Elliptical Roof Bars in Roof Rack


The rack worked perfectly with my car. It was easy to assemble and has been toting well for more than a year 653624



- INXB160-2
by: John05/17/2019

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Good 643034



- INXB108-2
by: Roger08/20/2018

Review from a similar Inno Elliptical Roof Bars in Roof Rack


..GREAT SERVICE ..thankU 556658



- INXB93-100
by: Gabriel05/23/2018

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Thank you etrailer my car looks great I spent 4 hours to ensemble this cross bar and the bask rack but finally I made it now I have more cargo space in my car I really recommend etrailer good quality items and good service thanks again 512688



- INXB138-2
by: David R01/23/2017

Review from a similar Inno Elliptical Roof Bars in Roof Rack


Easy to order, easy to install and quite effective in it's use. Thank you. 334612



- INXB145-2
by: paul01/07/2017

Review from a similar Inno Elliptical Roof Bars in Roof Rack


PERFECT 333373


23
23


Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?


Inno Accessories

Fit to this rack on your 1999 GMC Yukon

Info for these parts were:

Video by:
Zack K
Video by:
Andrew K
Video by:
Zach D
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Written by:
Lisa S
Installed by:
Hayden R
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


GMC Yukon Accessories