Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM

Part Numbers: 90885,3025-P

Retail:$220.45

Our Price: $189.45

You Save: $31.00

This item qualifies for Free Shipping


In Stock
Tekonsha Brake Controller - 90885
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos




Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
part number: 90885

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles.

Features:

  • Brake controller activates trailer brakes in proportion to your vehicle's braking action
    • Automatically adjusts trailer's braking based on deceleration of tow vehicle
    • Activates immediately - no pausing like with time-delayed brake controllers
  • Automatic-leveling ability - internal sensor detects deceleration even if controller is not mounted flat
    • Position at any angle up or down in the vertical plane
  • 3 Boost levels let you adjust initial braking power and aggressiveness
  • Continuous diagnostic check alerts you to any potential problems
  • Integrated safeguards protect your vehicle, trailer and the controller
    • Minimizes drain on car battery by drawing only 3.6 milliamps when not in use
    • Prevents trailer brakes from overheating by reducing power output to them during prolonged stops
    • Defends brake controller and trailer breakaway systems against shorts
  • Auto-dimming, blue LED display is easy to read
    • Automatically adjusts screen brightness based on the current lighting conditions
  • Built-in, rotary-style manual override lever
  • Quick-disconnect feature lets you easily remove and store the control when not in use
    • Replacement wiring harness (sold separately) and replacement bracket (7686 - sold separately) required to move the controller from one vehicle to another
  • Plug-in, vehicle-specific brake-control adapter can be used for certain applications to reduce installation time


Specs:

  • Application: trailers with up to 4 axles (8 brake assemblies)
    • Designed for use with electric or electric-over-hydraulic trailer brakes
  • Dimensions: 3-1/8" wide x 5-1/8" long x 2" tall
  • Length of hardwire pigtail: 30"
  • Mounting: 360-degree vertical plane operating range
  • Limited lifetime warranty


Proportional Braking

With a proportional brake controller, you can get heavy-duty emergency braking, general braking or slow-to-an-idle braking for your trailer automatically. The intensity with which your trailer brakes are activated and the rate at which they are applied are dependent on the deceleration of your tow vehicle. This means that, unlike time-delay controllers - which send the same amount of preset power to your trailer brakes every time - proportional controllers are able to adapt to every braking situation differently. So, if you slam on the brakes in your truck, your trailer brakes will activate with that same extreme intensity. And if you merely slow down as you approach a red light, your trailer will gradually brake in the same manner. Just set the initial power level, select a boost setting, and you're good to go.


As long as the P2 controller sits level on a horizontal plane and is pointed in the direction of travel, it will sense - via an internal inertia sensor - how your tow vehicle brakes. This inertia-based sensor responds to the deceleration of your tow vehicle as you brake by signaling the controller to send out enough power to your trailer brakes so that they are activated with an intensity that matches. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.


Power Boost for Heavy-Duty Towing

Aside from smoother, more efficient braking, Tekonsha's P2 brake controller also offers a boost feature that gives you more initial braking power for those times when you're towing heavy loads. You can switch boost levels so that the power output to your trailer brakes automatically starts out at either 14 percent or 28 percent of the predetermined power setting.


So, if you boost the initial power so that your trailer brakes activate with 28 percent of the overall intensity at the start, the brakes will reach maximum braking faster. This is particularly beneficial if you are towing a heavy load because the intensity required to stop that load may be far greater than that needed to halt your vehicle. Therefore, sending out more initial power to the trailer brakes - and causing them to reach maximum braking faster - allows you to better control the trailer so that it doesn't push your tow vehicle before coming to a complete stop.


If your trailer weighs less than your tow vehicle, no boost is needed. But if you wish to set the boost so that your trailer leads the braking of your towing setup, you can select level B1. The following table gives an indication of when you might use the different boost levels and the power increases that they offer.


Approximate Gross Trailer WeightBoost LevelIncrease in Initial Power Output
Less than tow vehicle GVWB114%
Equal to tow vehicle GVWB1 or B214% or 28%
Up to 25% more than tow vehicle GVWB2 or B3*28%
Up to 40% more than tow vehicle GVWB3*28%

*Both B2 and B3 offer a 28-percent boost in initial power. But the braking curve for B3 is more aggressive than that of B2. This means that, even though you will start out with the same intensity when using these boost levels, you will get an overall more aggressive braking experience with the higher level. So if you use B3, you will reach maximum braking sooner than if you use B2.


Safety Features

The Prodigy P2 offers advanced safety features to prevent damage to various components of your towing setup. Integrated reverse battery protection shields the brake controller and your trailer's breakaway system from shorts. When the P2 is not in use, it will be in power-saving mode. In this setting, the power draw falls to only 3.6 milliamps, minimizing drain on your vehicle's battery.


When you stop at red lights, or any time that your truck and trailer are at a standstill with the brakes applied for more than 5 seconds, the P2's "hold" feature will activate. When this happens, the power output to your trailer's brakes will be reduced to just 25 percent of the preset power setting so that the brakes will not overheat.


If ever there is a time that you need to brake your trailer separately from your tow vehicle - when traveling down a steep incline, for example - the manual override lever is easily accessible. Pushing this lever engages the brakes on your trailer with full power. In addition, when you activate this override, the brake lights on your trailer will illuminate, properly warning those behind you of the braking action of your rig.


In addition to all of those safety features listed above, the P2 offers diagnostics such as:

  • Open ground
  • Overload
  • Output short
  • Power loss
  • No trailer connection

Automatic Leveling and Simple Installation

The self-leveling feature of the P2 ensures that the brake controller continues to function even as you drive up steep hills or through the mountains. Simply mount it in your cab at any vertical angle, and the controller will level itself automatically thanks to its 360-degree rotational range.


Correct P2 mounting360-Degree P2 mounting

Note: The P2 must be mounted on a level horizontal (side-to-side) plane and must be lined up with the direction of travel for the internal sensor to function properly.


Installation is a snap. After mounting the P2 unit in your cab using the included pocket mount, hardwire one end of the included pigtail harness directly into your vehicle. The other end plugs into the brake controller. To transfer the P2 to another vehicle or to remove it for storage, just unplug the unit and slide it out of the pocket mount.


Installation Accessories

For even easier installation, a vehicle-specific wiring adapter is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end plugs into the controller - no hardwiring required.


Note: If a custom brake-control wiring adapter is not available for your vehicle, one of the following will be required:

20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications

30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications


See also etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.



90885 Tekonsha Prodigy P-2 Proportional Trailer Brake Control

Replaces Tekonsha 90185



California residents: click here



Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
part number: 3025-P

Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.

Features:

  • Adapter is wired for GM trucks and SUVs from 1999 to 2002
  • Wiring adapter eases installation of your electric brake controller
  • Custom connector end plugs into the electric junction box beneath the dash of your vehicle
  • Other end plugs into the back of your electric brake controller
    • Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
    • Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
  • Limited 1-year warranty


Installation of Tekonsha Brake Controller Adapter

Junction BoxBrake-Control Adapter Port

This adapter plugs into the port that is built into the electric junction box beneath your vehicle's dash. The black box is located to the left of the steering column, just above the carpet. To plug in the adapter, first remove the cover on the box. The adapter plugs into the second slot from the left, on the top row.


To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.


This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.



3025-P Tekonsha Brake Control Wiring Adapter with 2 Plugs



California residents: click here



Video of Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Brake Controller Installation - 2005 GMC Sierra

Alright today on this 2005 GMC Sierra, we are going to install part number 90885, the Prodigy P2 brake controller and part number 3015-P, the brake controller adapter. First step that we need to do is to remove this cover for access to the port that is behind here. So we will undo this nut and pop the cover off. We will take our cord and just plug it into place. Moving on, we will reinstall the cover and then put the nut back into place. Alright next we will go ahead and install our brake controller bracket and we are going to do that on a sheet metal at the bottom of the dash here.

We will take the bracket. We will wind it up; with the sheet metal we will use a clamp to hold it into place. Alright and we will use some soft tapping screws to attach the bracket to the sheet metal. Let us go ahead and attach our dash according to the brake controller. OK, that is good that we have got power, good. We will attach our brake controller to the bracket.

Alright now well take our cable and well zip tie it out of the way. Alright in a short time our break control is already installed. There you have it for part number 90885, the Prodigy P2 Break Controller.



Customer Reviews

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional - 90885

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM - 3025-P

Average Customer Rating:  4.9 out of 5 stars   (2154 Customer Reviews)

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles. Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.

- 90885
by: Natejeepxj03/25/2013

I installed this in a 2006 WK Jeep in about two hours. I used the generic pigtail because I didn't have/couldn't find a vehicle specific connector. There are more specific instructions for wiring it online, be a little creative with your search. I was able to find the same sheet as the generic one packaged with the controller, just specific to a 2005-2010 Jeep Grand Cherokee. The install took me about two hours, working by myself, and was relatively straightforward. Much of the time was taken up by making the install of wire runs neat and preserving the "factory look," if you are not particular about appearance, the install could go much more quickly. This was my first time installing a brake controller. I haven't had a chance to hook it up to a trailer yet, but it seems to be functioning properly. I am a little concerned that the ground wire on the supplied pigtail is a small gauge, 14, so if I encounter any issues I will switch this out with a larger gauge wire. I also noted that the factory wiring harness supplied by the Jeep dealer for the hitch has a 14 gauge brake wire. While this should be sufficient for up to two axles, if I notice any issues, I will replace this wire also with a heavier gauge. The generic pigtail contained a 12 gauge wire for the brake line. All around, so far very pleased with this purchase. 72226



- 90885
by: Mark A.04/23/2013

Seems to work real well but, I can't really judge to much for My trailer's breaks haven't been used for years. Installation was quick. It took about 15-20mins without my trip to the hardware store for an 8mm nut. Tried it out on my trailer and once you get the adjustment right, it works real well. Definitely worth getting a break controller for whatever trailer you tow and this one is real nice. 77404


Comments

Ive owned this for about a year now and have gotten the kinks out of my campers breaks. They seam to work real well with it. I seem to be able to break without the nerve-racking stress I had with the old truck. Proportionality control also is handy going down long hills or in heavy traffic. most of the time I have it in Normal mode dialed to the instructions in the manual. I would Highly recommend those without a break controller get one and this one is, so far, excellent.

Mark A - 04/24/2014

3725

- 90885
by: Wyatt W06/19/2012

This is my first brake controller so that fact may disqualify me as a reviewer; but then maybe it makes me a better one! I usually do a lot of research before buying something I need that I know little or nothing about, but that was a quick task in this case. EVERY forum, expert review, and installer recommendation had the same two pieces of advice: Buy proportional versus time delay, and buy Tekonsha. Beyond that, it was either buy the Prodigy P2 if you don't need an LCD display or the P3 if you do. I didn't need the LCD display because I'll only be hauling one trailer with the same drag car on it, so now that I have the controller installed and adjusted I don't expect to have to mess with it any more. Installation was easy peasy with the adapter cable for my '10 Tacoma, mounted under the lower dash just beneath the steering column. I did add two slightly beefier sheet metal screws to the dash mount as the two screws provided seemed a little weak. Solid product, works great, took all of 15 minutes to adjust. 44806



- 90885
by: Mai N.01/26/2012

Great Brake Controller This was my first time using a brake controller and installing one as well. The directions were easy to follow for both the install and setup. 2012 Ram 30416


Comments

where did that mounting bracket in this picture come from. Was it already on your 2012 Ram?

-- comment by: William E - 08/19/2013

1922
Comments

The bracket was already on the Vehicle, its in between the light switch and the parking brake release lever where OEM controller would be if equipped , it requires a little modification to fit.

-- comment by: Mai N - 08/21/2013

1933

- 90885
by: neal07/22/2013

this unit hooked up just as the video had shown and works great 90980


Comments

Hey Patrick, thanks for the follow up message. I am still liking the purchase I made , the mirrors are wonderful and still working as they should with weekly use , and the brake control box is also doing what its supposed to be doing and is used weekly also . I am happy with the purchase I made and will for sure use etrailer.com for future items on this truck and the others that i own .

neal - 07/24/2014

5889

- 90885
by: Peter10/17/2018

Installed and operated in minutes just as the video described. Fast shipping and great prices = PERFECT! thank you 575217



- 90885
by: Josh B.10/04/2014

The Brake controller arrived promptly and worked as expected. If you are shopping for trailer accessories buy it here at etrailer. I found etrailer when I started searching for a brake controller for my truck. Their install video was one of the first search results when I searched out my vehicle which led me to their site which had all of the information you could want. Not only did they have install videos for my specific vehicle but for just about every vehicle application. When shopping on their website you are treated to install instructions as well as the video install instruction for your application as well as installation tips. Many reviewers also upload pictures of their installations giving you lots of ideas for your installation. A simple search lead me to etrailer the wealth of information convinced me to buy from them. 154471



- 90885
by: Marc10/18/2018

Setup was easy and this little guy worked fine for a 2000 mile trip with a borrowed trailer last fall. I haven't used it since then and I actually unplugged the power cord so I don't have to look at the lights all the time. But it's ready and waiting for the next use. It's small enough that it's not in the way and I don't even notice it is there when I'm not looking for it. 575372


Comments

In early 2019, Tekonsha updated the Prodigy P2 brake controller with an auto-dimming feature that will automatically reduce the intensity of the display lighting when the light levels in the vehicle interior get low.

-- Mike L - 02/14/2019

49498

- 90885
by: Jim10/08/2018

The Prodigy brake controller was just what my customer needed for his 3/4 ton Chevy Van to pull a medium sized enclosed trailer. We have installed several of the Prodigies and all our customers love them. 572694



- 90885
by: William10/08/2018

Everything I ordered was shipped and arrived extremely fast. Products are excellent quality with prices that can’t be beat. The technical assistance and videos are very helpful. I have purchased several products and will continue to do so. 572767



- 90885
by: Joe C.01/29/2014

Can't say enough for etrailer.com. The big selling point for me was the incredible number of help videos on their site. I didn't feel a need to read the directions since their installation video was very clear. We are currently getting four trailers updated for DOT inspection, so I'm sure I will be back. 115144


Comments

They are still working great. We were under the gun at the time trying to comply with new commercial vehicle rules, and your products AND ESPECIALLY your website was a very valuable resource. Your tutorials are awesome. Thank you for being a resource rather than just a retailer.

Joe C - 01/30/2015

9112

- 90885
by: Christopher10/04/2018

Excellent company to buy from. A clear informative website. That has all the info needed to install the product you buy. Thanks for the short videos, they fill in any information gaps that may be present. Impressive in every aspect, And I'm hard to impress........Thanks George Chris Krupp 571650



- 90885
by: Chris D.08/18/2017

This is the second one of these I own. I was moving the first one around in three trucks. So now I should be swapping less. Extra mounting brackets make that pretty easy. I was worried that because it's inertia based it wouldn't work very well but most of the time it's pretty invisible. If you're using the same trailer and similar loads it's great. If you're swapping trailers and changing weights you'll be fiddling with it. It's not a Max Brake but it's not a Max Brake price either,and Max Brake is unavailable anyway. Since it doesn't know how hard your stepping on the brakes it does it's best to guess. So for 90 percent of your driving it's perfect. Off road every dip and rut it's jabbing on the brakes if your foot is touching the brake pedal. Haven't had it in ice yet. I think i'll use my Max Brake for that. Wish it could tell me the amperage to the brakes so I'd know if a magnetic failed (Max Brake), wish it would dim at night (pretty much every consumer electronic), wish I didn't have to unplug it with an empty car dolly (like every controller except for Max Brake). A note about the "boost" function. It basically starts at either 0 (no boost), 2volts (setting 1), 4volts (setting 2) and so on. To help with heavier loads. So do I recommend it? I'll buy another one, do I miss a real proportional controller? Yea... 422122


Comments

Chris D thanks for your feedback on your recent brake controller purchase. The Prodigy P2 brake controller is considered a proportional style brake controller when compared to a time delay brake controller. This controller activates based on the inertia sensor in the controller that sends the braking signal to the trailer based the vehicle deceleration, or how severe the vehicle is nose diving. Therefore the brakes on the trailer are applied in proportion to how the inertia sensor calculates the deceleration of the vehicle. For your next brake controller purchase you may want to consider the Prodigy P3 90195. This controller uses similar inertia detection as the P2, but also has a more detailed display that will allow for additional diagnosis of issues. It also offers a preset option that will allow you to program the controller based on the trailerload that is frequently towed. The display also offers more customizable features vs. the standard display for the P2.

-- Rachael H - 08/25/2017

27596
Comments

For 2019, Tekonsha has updated the Prodigy P2 to include an auto-dimming feature. The display will dim as the surrounding light levels decrease.

-- Mike L - 02/14/2019

49497

- 90885
by: Nick04/11/2016

Great Brake Controller, used it with the Universal Install Kit for Brake Controllers and No-Drill Mount Bracket, Short - 18140. It only took me 2.5hrs to have it fully installed in my Jeep Wrangler Unlimited 2013. Videos were great. Also having some 1/4in water tubing helped for phishing wire thru frame. Wish I had watched the video a couple of times before buying and also purchased the extra wire to go from the battery to the brake controller, but had extra wire from another project that worked. This brake controller works great as we tow a <3500lbs Travel Trailer with our Jeep. Comes with a great card that helps with settings, keep it in the glove box for future reference. 243826



- 90885
by: Todd E10/06/2017

This is the second Prodigy P2 controller I have purchased. I have one on my smaller Audi SUV for 15 months. After 5000 miles trailering it has worked perfectly. Easy to proportionally adjust for our off road trailer when 4 wheeling and descending steep mountain grades. This second one is going on a new larger SUV. The dealership did the installation. 439878


Comments

I have driven my off road trailer over 10K miles in the past year. The brake controller has worked flawlessly, even in more rugged terrain as it is easy to manually calibrate the settings. It was installed on my off road equipped Q7 by my Audi dealer. This is my second Tekonsha. Good product.

Todd E - 10/10/2018

44475

- 90885
by: Philip03/04/2016

This is the second one I purchased. The first was 10 years ago and installed in my 06 GMC. It has worked flawlessly allowing for safe and smooth stops from normal braking to a few of the panic stops that had to made over the years. The new owner of the truck likes the way it works too. I have multiple trailers and with one initial setup on the lightest trailer was able to tow all of them without changing anything but the boost setting to compensate for the different trailer weights. When needing for a controller for my 07 Silverado there was no other unit that would fill the bill. This P2 looks the same except for the blue display instead of the red. The install took 20 minutes using the direct fit cable ordered with the controller. Setup was easy as with the first unit. I wanted the placement above the parking brake pedal so the OBD II connecter had to be moved. I did the same with the 06 GMC. It is a comfortable place to reach and it keeps the light away from the passenger's eyes at night. As good as the Tekonsha controller is it is even a sweeter deal buying it from etrailer. The quick shipping, excellent pricing and knowledgeable staff are second to none in customer service. 239604


Comments

Tekonsha recently updated the Prodigy P2 with an auto-dimming feature for the display so no more worries about being blinded at night.

-- Mike L - 02/14/2019

49499

- 90885
by: Michael M.11/24/2017

I purchased and installed this brake control for my 2006 Chevy 2500HD. I have installed the Prodigy P2 controller in previously owned vehicles and am very satisfied with the performance. The shipping from etrailer was super fast and the communication was great. Etrailer is a great company to deal with. 454536



- 90885
by: David02/03/2012

So I purchased a Tekonsha p2 brake control recently after hearing good reviews from friends. After a few weeks of having it installed I have a few gripes: 1. Display - The LED display is super bright and there is no way to turn down the brightness. It is really distracting to have a flashing bright blue light shining up at you at while driving at night. If you are the kind of person who is bothered by a GPS/Phone screens while driving at night then this this will bother you. 2. Wiring - Tekonsha's wiring instructions tell you to wire the brake controller directly to the battery. If you do this the brake controller runs 24/7/365 even when the vehicle is shut off. Do you really want a constant drain on your battery? Instead I chose to use a relay to turn the brake controller on and off with the ignition. It would have been nice if there was a relay included or at least optional wiring instructions. 3. No Off Switch - My previous gripes wouldn't be that big of a deal if you could just manually turn off the brake controller when not in use. But for some asinine reason there is no off switch. So if you don't want the brake controller draining the battery of your parked tow rig, or are tired of the blue light blinding you at night you will have to climb under your dash, remove the brake controller from it's holster and then disconnect the wiring harness... 30936


Comments

There is an automatic shut-off built in to the controller. After a period of time, it will shut down on its own. It will not drain the vehicle battery if wired according to the instructions.Also, try the bracket instead of the holster. With the bracket, you can rotate the controller so the display is not directly aimed at the driver when not used.

-- Patrick B - 11/30/2012

524
Comments

David, Thanks for the comment on the blue LED. I am sensitive to the Blue. My eyes no longer can quickly adjust to differing light intensities. I can see in the picture how the blue affect the camera. So I will not buy this one. My old Tekonsha had RED LEDs. I should have kept it. Red is PERFECT for night vision. Red does not interfere with night vision. Thats why its widely use for night time illumination.Blue, absolutely not. Disappointing.

-- comment by: Mike M - 07/25/2015

13621
Comments

For 2019, Tekonsha has updated the Prodigy 2 to include an auto-dimming feature. The brightness of the display will dim as the ambient light level decreases.

-- Mike L - 02/14/2019

49495

- 90885
by: Steve09/26/2018

I installed the Prodigy P2 brake controller on my 3500 GMC Diesel to pull my 20,000 lb. boat trailer as well as 15,000 lb. work trailers. It is easy to use as I switch from controlling Electric over hydraulic braking (boat trailer) to electric brakes (work trailers). It's sensitivity works great with easy adjustments. I would highly reccomend this unit. 569199



- 90885
by: Ryan10/12/2018

Best brake controller on the market 573869



- 90885
by: Mark09/26/2018

The Tekonsha Prodigy P2 Trailer Brake Controller was easy to install and has worked flawlessly ever since! 568963



- 90885
by: Kevin P.03/16/2011

I didn’t have a good location that was reachable while driving so I mounted the controller on top of the dash. I leveled the bracket with a spacer and ran the harness by an access panel. I used about 70’ of the duplex wire due to running the cable to front and then back to the house batteries inside the coach. The access panel made it easy to make the connections and run the wires through the firewall. I mounted the 40 AMP and 30 AMP circuit breakers up front in the main fuse panel box. I drilled a hole through the box and firewall to run the wires from the brake controller to the breaker and to the blue wire for the tow connection at the back of the coach. I ran the battery connections to my house batteries up front instead of using the engine batteries in the back. I found the brake connection wire under the coach in front directly below the brake pedal. I mounted the converter in a beam in the back with lots of zip ties 9444


Comments

For ford ranger 2010 and perhaps other years:Be aware that the video contains the wrong instruction for the 2010 ranger. In wiring the brake light wire, the switch shown being tapped into gives reverse braking sensing, that is, it is 12 when the brake is not applied, but 0v when it is. I found elsewhere that the correct wire is the 2nd connection on the 5 pin plug that rides on the brake itself.This is no comment on the original video, which was excellent, and referred to the 2011 ranger model.

-- comment by: Scott M - 08/15/2013

1906

Wire colors can and do change often. We offer the colors that we find in our videos as a starting point, but even if you have a 2011, it is best to double check and make sure to positively identify the wire color first.

-- Patrick B - 8/19/2013


- 90885
by: Eric P09/14/2018

Once again the folks at etrailer came thru for me!!! I asked them to recommend a controller and I bought. It was shipped the day after I ordered (ordered on Sunday) and was delivered way before I expected. I installed it the same day and hooked up to the camper to try it out. Wow I couldn't ask for a better working controller. Set it and forget it. Thanks etrailer. Oh yea, free shipping made it even better. 564962



- 90885
by: Terence09/19/2018

Well I haven't installed yet, but was very pleased with the delivery process and the excellant letergy, for install instructions, and video's on your web page . Will keep you all informed as soon as I get the wiring harness, witch will be next mounth until then stay army strong. 566783



- 90885
by: Gregory10/22/2018

Worked well, priced right online instructions were key to successful installation 576525



- 90885
by: Garry07/08/2018

Yes I did. Bought towing adaptors/wiring parts for a 2001 Dodge Durango (it came from the factory without a tow package) and a 2014 Honda Pilot (came from the factory with a receiver, and only half of the tow wiring harness). I knew a year ago I needed to get these two vehicles ready for a move we’ll be making from TN to SC using a trailer with electric brakes (by August of this year). You have the list of items I purchased. I finally got around to starting the projects. Just finished the 2014 Honda Pilot yesterday. The installation on the Pilot went somewhat well. I made one mistake (human error on my part) I put the 30 amp fuse from the T-one vehicle wiring harness #118265 in the wrong fuse box under the hood. Also, after installing the plug in wiring adapter for the electric brake controller #3070-P and the Prodigy P2, I discovered I had no power running to the brake controller. I didn’t know why. I happened by chance while reviewing the hundreds of customer feedback comments that I needed an additional 20 amp fuse under the hood in one of the fuse boxes in slot number 14, for e-trailer. It seems to work ok now for the Honda Pilot (going to hook up the trailer today for a trial run). I’ll be installing the other components on the 2001 Dodge Durango this week. E-Trailer dosn’t have a “How To” video for the 2001 Dodge Durango Sport without a towing package. Not looking forward to this install at all. A few years back, I did install a receiver and a 4-pin adapter wiring kit to my rear brake lights on this vehicle. I hope with the the Universal Kit #ETBC7 and the additional Prodigy P2 #90885 I bought from you guys I can get the Durango ready to tow the same electric brake trailer. I did find “Trailer Brake Controller Installation-2001 Dodge Ram-etrailer.com” that I hope will make this installation go ok. Will there be any additional fuses or other things that I will need for this vehicle? Thanks, Garry 539117


Comments

You should not need any fuses for the 4 way wiring in the Dodge Durango. You will need the circuit breakers that come with the # ETBC7
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
$53.99
kit. I have attached a video for the installation of the P2 and the # ETBC7
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
$53.99
kit on a 2007 Dodge Durango, it is the same installation as the 2002.

-- Heather A - 07/10/2018

40773

- 90885
by: Robert g.10/03/2018

GREAT PRODUCT, PUT IN MY SELF , GOOD COMPANY AND SUPPORT. VERY RARE TO FIND A COMPETENT INTERNET COMPANY WITH A WEBSITE THAT WORKS WELL. BETTER THAN GETTING RIPPED OFF BY A SALESMAN. HERE YOU CAN GET ALL THE INFO YOU NEED. NO LIES BY OMMISION. BEEN RUNNING ELECTRIC BRAKES ON FORTY FOOT TRAILERS FOREVER CHEAP AND RELIABLE. COMMON SENSES GOES A LONG WAY. THANKS 571390



- 90885
by: George C.08/22/2018

I purchased this controller for my 2005 Jeep TJ. We're towing a 2014 Forest River FLagstaff MAC and, after doing much research, we decided that this unit (along with the universal installation kit ETBC7) was the right one for us! Both the controller and install kit contain everything that you'll need for a clean, professional-looking install! The install took around 2 hours (in my driveway) and the controller works flawlessly! This setup is perfect for a Jeep TJ, the controller fits nicely to the lower left of the steering wheel (out of the way) and the trailer connection is a bolt-on setup that attached to my Reese towing hitch! The trailer connection (with the install kit) has both a 4-pin connection and a 7-pin connection so there is no need for adapters! It is truly a "plug and play" setup!! As far as ordering and customer service goes, this was one of the smoothest transactions I've had in quite some time! There are numerous photos and install videos that will guide you through the install. We'll definitely start with etrailer.com for our next purchase like this! 556457



- 90885
by: Rob Rod03/28/2014

I installed this model 90885 Prodigy P2 Brake Controller using the ETBC7 Brake Controller Wiring Kit on my 2007 Dodge Nitro. On a scale of 1 to 10, I consider myself about an 8 where it comes to automotive mechanical and electrical work. I also strive to get as close to perfection as possible. To do the job right, it did take some time and it did require paying close attention to the directions for both the wiring kit and the controller. However, the directions were "right on", and all the needed "goodies" to do the job were furnished. My hat is off to ETRAILER for the informative videos they provide and their customer service, which includes very quick shipments of their products. 122727



- 90885
by: Jim10/30/2015

Installed this in my 2015 Jeep Wrangler Unlimited Sport. I thought that I would add some input on installation that would help others. I found a way to route the power distribution wires in the frame of the Jeep that did not require the use of a fish tape. If you look at the frame just behind the rear tire you will see a hole in the face of the frame. Start pushing the wire bundle foreword. It will rise up and over the U shaped frame portion of the rear axle and then down along the passenger compartment area. About there, you will be running out of pushing stiffness. Look for the wire bundle to appear at a similar hole in the frame in that area. Grab it a and pull out approximately 4 feet and then push it right back in the same hole going foreword. This time you will look for the wire bundle to appear at again a similar hole just foreword of the driver compartment. Now is the time to grab it and start heading up to the engine compartment outside the frame. Do the same procedure for the wire going aft for the plug end of the installation. For the wires going through the firewall, Jeep has conveniently added a nice foam lined hole to route wires through. You will see this hole position in the attached photo with a green wire coming through. The plastic cover around the steering column pulls down from the top and hinges at the bottom. Remove the metal plate with two bolts to get to the brake switch. Twist and pull the brake switch out foreword and go for the brown stripped wire as your brake circuit. Do order the LONG frame bracket adapter for the switch plug at the rear. To drill the steel for the supplied plug bracket just takes too long. Now that you have it installed you will notice that the power will remain on the unit after you turn the key off. Don't sweat this as it will not stay on long. I doubt a few milliamps draw is going to kill your battery! 231113


Comments

Working great would recommend to all.

Jim - 10/29/2016

21657

- 90885
by: Jake M.06/24/2014

I installed the brake controller a week or two ago in my 2013 GMC Sierra 1500. I had one just like it in an older Duramax that the previous owner installed--I went with the same product. I had the chance to use it this afternoon to pull a few tons of #57 stone. Trailer plus load I figure about 6000 pounds behind the truck. Pictures are attached. This is the first 1/2 ton truck I've owned in nearly 10 years and worries how it would do with heavier loads. This controller made a world of difference and really maximized the use of my truck. Great product and I highly recommend it to anyone needing a good controller. 137307



- 90885
by: Larry L.04/29/2015

The online video showing the installation of the Prodigy P2 trailer brake control into a 2011 Ford Ranger was excellent! It made the installation into my Ranger simple and straight forth. I have yet to hook up to my travel Trailer and adjust it for brake setting, but all readout displays thus far are as stated in the instructions. Having previously installed the trailer connector, I did not purchase the installation kit and in retrospect for cost effective and simplicity would recommend anyone to purchase the kit along with the controller. I believe I am going to be very pleased with this product. Thank you 188777


Comments

great! thank you for an excellent product!

Larry L - 04/28/2016

17623

- 90885
by: Garry in Indio06/25/2017

Used in conjunction with harness kit for my 2002 tundra, this year has no provisions for towing trailer with electric brakes. The controler itself has proven itself nicely, with no issues with installation or use, adjust easily. The mounting location I chose may have some slight interference issues with legs on taller people, but I have not had any @ 5'11". The truck is a midsized so room is more limited. I'm towing a tandem 14' trialer with 4 seat RZR, tracking and stopping is perfect, even under hard breaking. 398903



- 90885
by: Chris G08/12/2017

Purchased this unit to go along with my install kit on my 2012 Odyssey. Wanted something small and versatile and this fit the bill. Easy to install, the video helped, but I chose to remove the coin pocket and modify it to fit the controller. All I had to do was remove some of the extra plastic and voila!, the controller slid right in. Now I can remove the controller and still use the pocket when not towing. When I need it, I just pull out the pocket, and hook in the unit. I've included some pics, super easy to modify, takes 10min. 419272



- 90885
by: Celia E.09/13/2018

Excellent!! The controller and the install kit came exactly when they were promised and the install instructions were very straightforward. Your average mechanically inclined housewife can do it all by herself, it's that easy. I installed mine on a 2001 Toyota Tacoma Pre-Runner and the only thing that was mildly challenging was finding the brake wire behind the dash, which fortunately the folks at e-trailer explained how to find in their Q & A section. I would definitely recommend the product and install kit. I will be test driving it this weekend with my new teardrop camper. Will amend review and report on that when I get to try it out! Safe towing! 564842



- 90885
by: Matt02/24/2014

very nice controller, very smooth and you don't have to mount it flat!! e trailer is the best company i ever worked with. they have pics, video, email support(exellent) and just flat out make it easy for you to do it yourself instead of paying some dirt bag $300 to install at your local trailer shop. i also installed kit #ETBC7 and once agian it was awesome. COMPLETE with DETAILED directions. i'm not a mechanic or hack employee at local trailer shop....BUT dealing with etrailer and there parts made my install very easy and CLEAN!!! 117534


Comments

Your products are awesome. Ive had zero issues with it and 5 of my friends purchased and installed the same set up in there trucks. Thanks again for the great products and excellent support.

Matt - 03/05/2015

9893

- 3025-P
by: Sherry R12/31/2012

Thank you so much Cristy for the exceptional guidance and friendly help while choosing the correct brake controller for my boyfriend's truck.....thanks for all the correct and helpful information everything went smoothly.....seamless....unusual this day and age.....Delivery was very prompt and product certainly lived up to all the reviews I had read before calling e Trailer......I would, without hesitation recommend this company for any mechanical needs......appreciate the follow up too...... 62269


Comments

Fantastic track record....absolutely no problems with the brake controller.....extremely happy with its performance and I stand by my original comments....thank you for contacting me once again and checking our satisfaction with the purchase.....refreshing to have someone contact us one year from date of purchase.....my appreciation for your concern and I will definitely call if we have further needs...Happy July 4Th

Sherry R - 07/01/2014

5244

- 3025-P
by: Guy M.06/14/2015
2010 Chevrolet Suburban

Bought a new Primus IQ brake controller but it only came with a pigtail wiring that had to be spliced into my '01 Suburban. Ordered the direct fit wiring pigtail from etrailer.com and couldn't be more pleased! It literally took me less than 10 minutes to plug in the wiring and mount the brake controller. Excellent customer service and very fast shipping! The kind of shopping experience that causes repeat business. Thank you etrailer.com and customer rep Lexus for making everything so simple! 203301


Comments

Excellent. No problems at all!

Guy M - 06/13/2016

18555

- 3025-P
by: Sean L01/07/2014
1999 Chevrolet Suburban

etrailer's instructions and videos are awesome. installation was a breeze UNTIL I needed to locate the brake signal wire (cold side of brake switch) on my 1999 suburban. What a pain. the switch is not very accessible let alone there are a ton of white wires under the dash --along with an alarm. Long story short, I found this in a GMC forum and it saved me big time: "Under the dash, next to the emergency brake is a black convenience box. At the bottom of the box is the letters GRN, next to that is the letters NAT with a small recessed box with two male spade connectors. The spade on the right goes to the brake switch. The wire from the brake controller is terminated there." Using the supplied probe tester I was able to verify this and finished up my installation. The Tekonsha Prodigy P3 controller works great. 112192


Comments

The Tekonsha Prodigy P3 controller is still working great. I cant believe i didnt get one sooner. Easy to adjust on the fly and no issues at all.

Sean L - 01/07/2015

8449

- 90885
by: Chris09/17/2019

Fast shipping. Received Friday afternoon and towed Saturday morning. Installed in less than 20 minutes 704855



- 90885
by: Philip09/12/2019

I’ve used this brake control for about a year, installed on a 2014 Subaru Outback. I tow an 18’ Aliner PUP, and it has performed flawlessly. I grappled with all the different options, but landed on this one and I have no regrets. It’s very easy to adjust the braking power and boost. It’s also very obvious when your trailer isn’t connected (“nc” on the screen for “not connected”). Lastly, the brake application is smooth and effective. My only complaint is that the installation was very time consuming, but this would be the case for any brake controller, so I can’t deduct for that aspect. In general, this was definitely a good purchase. 702750



- 90885
by: John09/11/2019

the product was easy to mount with heavy duty hook and latch so I can remove when it is not needed. the design is great as we tow various trailers and need to be able adjust for each one. Product matches it description. the on line video for installation are very helpful. 701690



- 90885
by: Danny09/10/2019

Fitment was as advertised. Plug and play for my 2003 GMC Sierra with factory towing package. Harness and controller install was quick and easy. Thanks etrailer 704878



- 90885
by: Mike B09/10/2019

easy peasy installation on a 2019 Chevy Colorado @ 1/3 the cost of what Chevrolet wanted for one 700063



- 90885
by: Aaron09/10/2019

Works for my 2010 tacoma 704437



- 3025-P
by: Greg09/05/2019
2000 Chevrolet Silverado

Made installation quick and easy on 2000 Silverado. 697916



- 90885
by: James09/04/2019

This is a great product. We have sold quite a few of these over the years. 697646



- 90885
by: Derrel09/02/2019

Easy installation and works just like it should. I have this same unit in another truck and I'm very happy with it. 697120



- 90885
by: Jonah08/31/2019

Great trailer brake controller for my VW Touareg Thanks!! 696366



- 90885
by: Geoffrey08/31/2019

Great controller. Easy install and setup. I won't go back to a time delay controller. This thing is smooth. 696287


Show More Reviews