Draw-Tite Activator Trailer Brake Controller - 1 to 2 Axles - Time Delayed
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long

Part Numbers: 5100,20127

Retail:$103.24
Our Price: $67.71
You Save: 34%
Orders above $99 qualify for Free Shipping

In Stock
5100 - Automatic Leveling Draw-Tite Time Delayed Controller
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos




Draw-Tite Activator Trailer Brake Controller - 1 to 2 Axles - Time Delayed
part number: 5100

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable to suit your preference.

Features:

  • Brake controller activates trailer brakes with preset intensity
    • Signal is sent to trailer brakes when tow vehicle's brakes are activated
  • Adjustable output control lets you determine the amount of braking force
    • Set to maximum when you travel through hilly terrain with a fully loaded trailer
    • Back off the power output when you tow a lightweight trailer
  • Sync setting lets you adjust the aggressiveness with which the brakes are activated
    • Get full power output faster by moving switch forward to increase activation speed
    • Achieve smoother braking by moving switch in opposite direction to supply power gradually
  • LED indicator on front of unit shows when trailer's brakes are applied
    • Light glows brighter as power output increases
  • Built-in, slide-bar manual override
  • Quick and easy installation
    • No need to mount level like proportional brake controllers
    • Mounting bracket, wiring harness and hardware included
    • Plug-in, vehicle-specific brake-control adapter can be used for certain applications to reduce installation time
    • Pulse preventer (5501) recommended for installation


Specs:

  • Application: trailers with up to 2 axles (4 brake assemblies)
    • Designed for use with electric brakes only
  • Dimensions: 3" wide x 5-3/8" long x 1" tall
  • Limited 3-year warranty


Time-Delayed Braking

The Activator applies your trailer's brakes when the brake pedal in your tow vehicle is engaged. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Activator. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. Both the amount of braking power (output) and rate of application (sync) can be adjusted to suit your preference, the road conditions, type of trailer and size of the load. To determine which levels are best for your application, you must test out your towing setup and choose what feels best.


A time-delay controller is so named because there is a delay between the time that you initially apply the brakes in your tow vehicle and the time that the controller reaches maximum power output. Unlike a proportional brake controller, which activates your trailer's brakes based on the deceleration of your tow vehicle, the Activator sends power out in the same way, with the same gradual delay, no matter the braking situation. Although this delay always exists, it can be adjusted by changing the sync setting.


Sync Settings

To adjust the aggressiveness of your trailer's braking action, use the slide control on the side of the Activator to change the sync setting. If you want to reach maximum power output faster, move the switch forward. To get smoother braking action, move the switch backward, thus supplying power to the trailer brakes more gradually. You can alter the sync setting to suit your driving preferences or to improve handling based on changing road conditions or varied trailer loads.


Quick, Simple Installation

Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. As a result, mounting options are limitless, so long as you can still easily access the controller.


Installation of the Activator requires that you either purchase a custom wiring adapter designed to plug into the controller or that you hardwire the controller directly into your vehicle. To hardwire the Activator, you must remove the plug at the end of the integrated wiring harness.


Installation Accessories

For easier installation, a vehicle-specific wiring adapter is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end plugs into the controller - no hardwiring required.


Note: If a custom brake-control wiring adapter is not available for your vehicle, a 20-amp circuit breaker (9506P - sold separately) will be required.


See also etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.

Same as Reese Brakeman Compact - 83501



5100 Draw-Tite Act I Time-Delay Trailer Brake Control

California residents: click here



Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
part number: 20127

Tow Ready Replacement Plugin Harness for the Tekonsha P3, Voyager, Prodigy, and Primus Brake Controllers. Also works with Draw-Tite Intella-stop Xtreme, Intella-stop Ultra, Intella-stop Digital, and Activator III (5520) brake controllers.

  • Wire lead length: 12"
  • Wire functions:
    • Blue: trailer brakes
    • White: vehicle battery negative terminal
    • Black: vehicle battery positive terminal
    • Red: cold side of stoplight switch


20127 Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long

California residents: click here





Customer Reviews

Draw-Tite Activator Trailer Brake Controller - 1 to 2 Axles - Time Delayed - 5100

Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long - 20127

Average Customer Rating:  4.8 out of 5 stars   (639 Customer Reviews)

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable to suit your preference.

- 20127
by: David11/05/2019
2007 Ford Ranger

Purchased a Teckonsha Voyager brake controller and the ETBC7 install kit. The instruction an video were very clear and easy to follow. Installed on a 2007 Ford Ranger Sport. Tech support was also very helpful on the one question I did have. 722791



- 5100
by: Jeremy10/06/2018

Controller works great seems better built than more expensive controllers I have used in past. Etrailer was great fast delivery 572248



- 20127
by: Tom Q05/06/2019

This harness and the Draw-Tite Activator Brake Controller worked fine. I would recommend. 639018



- 5100
by: Pat07/30/2019

a couple no drill hitches, no ordering problem and as it says no drill! Brake controller was plug and play! shipping was as they stated time wise . I will definitely order again ! 679805



- 5100
by: Joseph rice Vermont08/28/2019

Brake controller (5100) seems to be operating as wanted, no complaints, glad I got it. Installation was pretty simple, first time always takes longer because some of us like to double check the connections, and there is always a little hesitation about placement. But any real problems are solved by a simple contact with someone at etrailer anxious to help and put your mind at ease. I have not had any problems with the several etrailer purchases I have made. My Vehicle is a 2014 KIA Sedona and I pull a Casita with it. I bought the receiver hitch, brake controller, air suspension enhancement, and maybe 1 or 2 other things. All good. Great people to deal with. 696717



- 20127
by: David08/31/2019

I did not get any instructions on how to use this device. 696357


Comments
We do not have any instructions for this item either, but I do a help article that explains the details of how to install this item. This is a hard wire application for Draw-Tite or Tekonsha branded brake controllers, this is where the black plug end will install. The loose wires will then be connected to the corresponding functions on the vehicle: Blue: trailer brakes White: vehicle battery negative terminal Black: vehicle battery positive terminal Red: cold side of stoplight switch
-- Rachael H - 09/06/2019

60880

- 5100
by: Jeffrey02/03/2018

Although I replaced my Activator II with an Activator; both units ended up being fine.... After replacing the Activator II, after further troubleshooting, I found that I had two independent problems. 1. The brake power wire (blue) was corroded in the truck outlet 7 way receptacle; which I replaced. 2. The actuator brake activation wire (red) was no longer getting power out of the trailer wiring plug unit located under the dash. This was resolved but cutting that wire near the harness plug, and splicing it with the cold side of the brake pedal unit’s brake light wire (white). Your wiring diagrams on the subject proved very helpful in the solution..... 472647



- 5100
by: Garth01/18/2018

Not only did my packages arrive in a timely manner, but George kept me posted ont their progress every mile of the way. When I got the brake controller, it was everything the said it would be, and along with my final email from etrailer was a link to instructions for installing it and another link to questions and answers about the product and the installation process. How could anyone possibly ask for more. Thank you George, and thank you etrailer. 468070


Comments
Its been a year since I received and installed this braking system. Ive used it may times and it works perfectly. Easy to install and easy to use and affordable you cant beat it. I highly recommend, even though I know you can bet much fancier and more expensive items, you probably dont need fancier and more expensive when this fairly inexpensive item does the trick.
garth i - 01/19/2019

48704

- 5100
by: Kyle I.03/26/2017

I have to say..... installation was super easy!!! Installed this in an 06 Chevy Suburban, to pull our camper. 358923


Comments
No complaints!
Kyle I - 03/27/2018

36513

- 20127
by: Rob Rod05/13/2014

Exactly what I needed! 130328


Comments
Great.
Rob R - 05/13/2015

11647

- 5100
by: Eddie06/06/2019

I received the brake controller and wiring harness. took about 10 minutes to install. It works great. would highly recommend these products to any one that is in need of a good, easy to install controller for their trailer that works just fine. 656084



- 5100
by: Karri10/19/2018

Installed super easy using the provided video for instructions. Great product, have one in both of our towing vehicles for our 19.5' camper. 575737



- 5100
by: Edward01/03/2011

Brake controller installation It took longer that it should have to connect the controller, but I was being very careful, I would check and then double check to make sure everything was alright. I wanted to do a nice clean job so I took my time. The hardest part was making sure I had the right wire connected for the brake signal to the controller, but even that was not difficult to do. I took some pictures of when I started a task and the end result. I will probably move the controller from the ash tray area at a later date, but for now it is fine where it's at since I don't smoke and I don't let anyone else smoke in my truck. 4920



- 20127
by: Jason08/03/2020

Probably the easiest thing that I have ever done in the automotive world. The online guide was perfect! Easy to read, follow, and explained very well. When I contacted customer service about what I needed, not only did they explain things to me, but the representative sent (via email) pictures, prices, and part no. for the items I needed. It took the hunting and surfing out of it. I figured with customer svc. like this, why try to search for something a dollar cheaper. I will probably always go here from now on. 855246



- 20127
by: Ronald07/26/2020

Quick service, quality product. 851242



- 20127
by: Bob07/24/2020
2016 Cadillac SRX

Excellent service. Something that all companies should strive for. Really impressed. Thank you 850420



- 5100
by: Brad07/24/2020

It service me will 850158



- 20127
by: Brad07/24/2020

It service me will 850157



- 20127
by: Woggs07/22/2020

Brteaks were easy to install and work p erfectly. 849254



- 20127
by: Jeremy07/22/2020
2007 GMC Sierra New Body

Excellent wiring harness exactly what I needed 849229



- 20127
by: David07/20/2020

I used the product to hook up an I-Command Brake Controller to my 2011 Mazda CX-9. Overall the product worked great. Only headache was that I had to call my local Mazda Dealership to figure out which cable on the car I needed to hook in to the Red-Line (Brake Signal) on this cable bunch. Having watched the install video twice though, I knew what to ask for and acquired the information rather quickly. 846059



- 5100
by: Steve07/14/2020

Quick install, works great 837680



- 5100
by: Jeff F07/14/2020

Super easy to install 837662



- 20127
by: Paul W07/13/2020

Worked great for direct wiring the controller to the vehicle. 837233



- 20127
by: Robert07/07/2020
1993 Ford F-150

This website made my life so much easier. Highly encourage shopping here 829649


Show More Reviews
659
659


Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?


  • Brake Controller Plug Location on 2018 Nissan Titan
  • To install the Draw-Tite Activator Brake Controller # 5100 that you referenced on your 2018 Nissan Titan you will need the Plug-In Wiring Adapter # 3050-P. One end of the adapter plugs into the brake controller itself and the other end will connect right to the factory port that's located behind the dash, on the left hand side by the emergency brake pedal. There is a dash panel there that needs to be removed to gain access to the plug, which should be white in color and labeled "Electric
    view full answer...

  • Factory Brake Controller Port Location on 2017 Nissan Titan
  • To install the Draw-Tite Activator Trailer Brake Controller # 5100 that you referenced to your 2017 Nissan Titan, all you will need is the Plug-In Wiring Adapter # 3050-P if the truck is equipped with the factory 7-Way. One end of the harness will plug into the brake controller itself, while the other end will connect directly to the factory port on your Nissan Titan. The factory brake controller port should be located behind the dash, on the left hand side by the emergency brake pedal.
    view full answer...

  • Troubleshooting Surface Rust on Trailer Brake Rotors
  • Theoretically if you just have some surface rust on your rotors it would be knocked off after a drive that included a couple solid braking events. If you still notice rust on the rotors after towing the trailer then this could indeed be an indication that there's an issue with the brakes or simply that the rust you found is a bit deeper than surface level. If the rotors are badly rusted then your best option is just to replace them completely. I have attached a link that will take you
    view full answer...

  • Brake Controller Installation-2003 Ford Expedition
  • I don't have a vehicle specific wiring diagram for you, but I'd be happy to walk you through the process. The actual installation will depend on whether or not your Expedition is equipped with a trailer connector and if so, whether it's factory or aftermarket. There are a few different possible scenarios. 1) Your vehicle has the factory 7-way trailer connector on the back bumper. If this is the case, you'll have a plug and play installation. You'll need the # 3035-P brake controller
    view full answer...

  • Solution for Preventing Brake Controller From Pulsing with Hazard Lights
  • What you need to prevent your hazard lights from activating your trailer brakes is a pulse preventer part # 5501. This installs like the diagram I attached shows and allows your brake controller to know the difference from when the hazards are on and when the brake pedal is pressed.
    view full answer...

  • How to Install Brake Controller in 2018 Hyundai Santa Fe Sport
  • We can help you with installation of your Draw-Tite Activator Trailer Brake Controller # 5100 in your 2018 Hyundai Santa Fe Sport. Since your car currently has no trailer wiring you'll need a couple of items to complete the install. You will need a basic 4-pole wiring harness # 118571 along with Draw-Tite wiring pigtail # 20127. The only other part you need is our install kit # ETBC7 which includes all other components. You will not need anything beyond these three items. The 4-pole
    view full answer...

  • Recommended Brake Controller Wiring Harness and Installation Location on 2018 Nissan Titan XD
  • If your 2018 Nissan Titan XD has the factory 7-way trailer connector then there is a custom wiring harness for your brake controller. If you will be using a Draw-Tite, Tekonsha, or Reese brake controller you will use # 3050-P. For Curt use # C51382 and for Hopkins use # HM47635, and for Hayes use # HA81786-HBC. The factory harness you connect to will be located underneath and to the left of the steering column taped to another harness near the emergency brake pedal. It will be a 6 pin
    view full answer...

  • Replacement for Malfunctioning Draw-Tite Activator II Trailer Brake Controller
  • Based on your description of the problem with your Draw-Tite brake controller I suspect an internal fault within the controller itself. There is a chance that the red input signal wire could be loose, and this would cause the unit to stop generating output, but it would not explain the varying power level displayed. That specific issue makes me think that the internal circuitry has finally given up the ghost and the controller needs to be replaced. If your towed trailer has one or
    view full answer...

  • Troubleshooting Tekonsha Commander XP Brake Controller that is Progressively Working Worse
  • Testing the brake controller is fairly easy. Sever the blue brake output wire near the brake controller leaving enough room to reconnect it and then apply the manual slide. Using a circuit tester like the Tester, part # PTW2993, you should get output to the controller side of the wire you severed. If the manual slide activates the trailer brake output wire properly, try the brake pedal. If the brake pedal activates the brake output properly also then the problem is farther back either in
    view full answer...

  • Installing Prodigy P3 Brake Controller in 2016 Silverado 2500HD with OEM Controller
  • You can install a Prodigy P3 Trailer Brake Controller # 90195 in your 2016 Silverado 2500 with OEM controller but you will not use wiring adapter part # 3016. The necessary wiring for an aftermarket controller is present under the dash. Four or five blunt-cut wires are under the left side of the instrument panel. These wires are located above your left shin as you are seated in the driver's seat. The wires can be identified by a white label and the color of the wires. The wire colors
    view full answer...

  • Manual Override On Brake Controller Broke Now Brake Lights Stay On
  • If the manual override on your brake controller has snapped off and the brake lights are now constant then you will need to unplug the brake controller or cut the red wire. The brake controller would then need to be replaced which the Draw-Tite Activator part # 5100 would be a good option for or you could upgrade to the Draw-Tite I-Command part # 5535 which has a proportional design therefore will be much smoother. The Draw-Tite I-Command also has a lifetime warranty so you would be covered
    view full answer...

  • Parts Needed To Use Brake Controller With 2002 Cadillac Escalade To Tow Trailer
  • I am happy to help you setup your vehicle to tow a trailer with brakes however the Draw-Tite Activator Trailer Brake Controller # 5100 is only the brake controller to power the brakes on your trailer. The 2002 Cadillac Escalade will still need a 7-way plug on the vehicle to connect to the trailer. If the Cadillac has a factory package, you can use Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774 to plug right into the factory towing harness. If the Cadillac
    view full answer...

  • Troubleshooting Draw-Tite # 5100 Brake Controller Setup for Towing in Traffic and Smooth Braking
  • The Draw-Tite 2-4 Brake Electronic Brake Controller, item # 5100, is a time delayed brake controller and needs to be adjusted for braking power and delay. When the controller is adjusted correctly the brake controller will apply the trailer brakes shortly after the vehicle brakes are applied and will apply the brakes as hard as the setting is dialed up to. The problems you are experiencing are due to the style of controller and setup. Time delayed brake controllers brake the same exact
    view full answer...

  • Troubleshooting Brake Controller Installed on 2010 Nissan Titan
  • If you are using the Nissan factory harness, the harness will not wire to the brake controller color for color. Check the way you have the controller wired to the factory harness, it should be wired like this: Red Nissan Harness Wire to Black Brake Controller Wire Red and Green Striped Nissan Harness Wire to Red Brake Controller Wire Black Nissan Harness Wire to While Brake Controller Wire Brown and White Striped Nissan Harness Wire to Blue Brake Controller Wire If you have determined
    view full answer...

  • Trailer Brake Controller for a 2015 Jeep Grand Cherokee with Factory 7-Way Connector
  • For your 2015 Jeep Grand Cherokee I recommend the P3 brake controller, # 90195. This is a proportional controller that will apply the trailer brakes in proportion to how much the Jeep is braking. this is the safest way to stop and it reduces wear and tear on the vehicle and trailer compared to a time delay controller. This controller also has easy to read diagnostics so you will not have to look up any fault codes. It also has several presets if you tow multiple trailers and you can
    view full answer...

  • Installing a Brake Controller on a 2007 Chevy Express Van with Factory 7-Way Trailer Connector
  • The Chevy Vans are not actually pre-wired for a brake controller. A brake controller has to be partially hardwired in. If your 2007 Chevy Express came with a factory installed 7-Way trailer connector then the blue brake output wire should be ran from under the dash, near the emergency brake pedal back to the 7-Way. But the other wires have to be hardwired to the vehicle. Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall
    view full answer...

  • Availability of Universal Tekonsha Brake Controller Pigtail Wiring Harness
  • The TM75127 brake controller Pigtail for Tekonsha and TrailerMate brake controllers has been discontinued, but Tekonsha makes a version with a 12 inch wiring harness, part # 20127 or # 7894 with a 34 inch long wiring harness that' are identical. Either would work great for you.
    view full answer...

  • Troubleshooting Draw-Tite Activator Electric Trailer Brake Controller
  • The Draw-Tite Activator Trailer Brake Controller # 5100 you asked this question from has some trouble shooting in the owners manual. I've attached that manual but have also attached the photo of just that guide. If you have a different model controller, let me know. Also if you have a screen on the controller what is the error code you see?
    view full answer...

  • Where Does a Brake Controller Plug Into on a 2006 Chevy Silverado 1500 with Tow Package
  • On your 2006 Chevy Silverado 1500 there is a black junction box at the back of the floorboards and to the left of the brake pedal. If you take that cover the brake controller plugs into the top row, second spot from the left. It will be the same as in the video I have linked. For a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable. And you will also need harness # 3015-P. There may be some additional connections that will need to be
    view full answer...

  • Finalizing Final Under Hood Wiring Connections for Brake Controller on 2009 GMC Sierra
  • It sounds as if the final power connection needs to be made under the hood. If you take a look at the Brake Controller Installation FAQ article I have linked you to, and scroll to the bottom of the page, you can see the procedure for finalizing the connections under the hood. The wire that provides power to the brake controller is located to the right of the power distribution box, between the box and the fender. Cut the electrical tape and free the red wire with the ring terminal on
    view full answer...

  • Electric Trailer Brake Controller Recommendation for a 2009 Volkswagen Touareg TDI
  • I recommend the Tekonsha P2, # 90885. It is one of our highest rated and most popular brake controller models. If your Touareg has a factory tow package, then you will just need to connect the wires from the brake controller to the tow package wires under the dash. The tow package wiring may be located behind the lower appearance panel beneath the dash and to the right of the emergency brake pedal. It may be on the left, wrapped in grey foam. I have included a link to an FAQ article
    view full answer...

  • Do the Tow Ready and Tekonsha Brake Controller Harnesses use the Same Guage Wire
  • The Tow-Ready part, part # 20127, and the Tekonsha part, part # 7894, use the same size wires. The blue and black wires are 12 gauge and the red and white are 16 gauge. They are the same part other than wire length.
    view full answer...

  • Brake Controller Recommendation for 2013 Ford Edge
  • There is one other part you will need so you can install a brake controller to your 2013 Ford Edge, the Universal Installation Kit for Trailer Brake Controller # ETBC7. This will give you the 7-way connector, circuit breakers and rest of the hardware needed to install a brake controller, and work with your '13 Edge's hitch like the Draw-Tite # 75992 and 4-Way Wiring Harness # 118515. Once you have all of this installed the brake controller I recommend for your 2013 Ford Edge is the
    view full answer...

  • Where to Connect the Stoplight Wire on Brake Controller Pigtail
  • To install the Tekonsha PowerTrac Brake Controller # 39523 in your 2006 Ford Escape, the red wire on your brake controller harness # 20127 needs to be connected to the stoplight switch under the dash in your vehicle. There should be a wire for the stoplight switch on the back of the brake pedal. You will want to use a circuit tester, like # 40376, to find the wire that has signal only when the brake pedal is depressed. Testing the wires is the best way to be sure which wire is the one
    view full answer...

  • Parts Needed to Install a Brake Controller in a 2013 Ford Edge
  • You will need to hardwire in a brake controller on your 2013 Ford Edge. First you will need to convert the 4-way to a 7-way. For that you will need an Brake Controller Installation Kit # ETBC7. This comes with everything you will need to install a fully functional 7-way and brake controller in your vehicle. I attached installation instructions and an install video for this product for you to check out. If you do not have a brake controller picked out yet check out the Prodigy P2
    view full answer...

  • Does the Tow Package Wiring on a 2008 Chevy Colorado Match a Brake Controller Color for Color
  • On the 2008 Chevy Colorado with a factory tow package, the wiring for a brake controller is located under the dash, to the left of the brake pedal. The wire bundle should have a white tag on it that also lists the functions of each wire. You will need to match the wires to the brake controller by function, not by color. On the brake controller, white is ground, black is 12 volt power, blue goes out to the trailer connector, and red is in from the stop light circuit on the brake switch. It
    view full answer...

  • What Do I Need to Wire a Basic 4-Way Trailer Connector on a 1996 Toyota Tacoma Pickup
  • Since the 1996 Toyota Tacoma has separate turn and brake signals, a converter is necessary. Fortunately, there is a plug-and-play harness, part # 118379, available for your Tacoma that makes installing very easy. It simply plugs in-line with the tail light connectors behind the tail light housings. Then you connect the ground wire to a good ground point on the truck frame and you are done. I have added a link to the part and a video of it being installed on a 2000 Tacoma. I have also
    view full answer...

  • Installing a Trailer Brake Controller on a 2012 Dodge Caravan with Tow Package
  • I spoke with a colleague who worked at Chrysler and he stated that they do not put the trailer hitch and 7-Way wiring on the Grand Caravan at the factory. That is something that the dealer installs. In any event here is what you will need to do. The brake controller will need to be hardwired into the vehicle. The white wire on the brake controller will need to get connected directly to the negative terminal on the vehicle battery. The black wire will need to connect to a 30 amp circuit
    view full answer...

  • Where to Splice Brake Light Wire From Brake Controller To Stoplight Wire
  • Since your vehicle does not have a brake controller port, you will want to use a universal wiring pigtail. For example, if you have a Tekonsha brake controller, you could use a Plug-In Harness for Tekonsha and Draw-Tite Brake Controllers # 20127. You will want to use a circuit tester, like # 40376, to test the wires at the stoplight switch at the back of your brake pedal to find the wire that only has signal when the brake pedal is depressed. Once you have found the wire that only produces
    view full answer...

  • Which Brake Switch Wire is Used When Installing Brake Controller on 2008 Dodge Ram 1500
  • A brake controller has four wires exiting the rear of the controller, they attach as follows: the red wire attaches to the brake stoplight switch located at the top of the brake pedal. The color of the correct wire on the brake switch is usually a white wire with a tan stripe, but it could vary so it is best to find the correct wire you will need by testing the wires for function. The stoplight switch can have several wires exiting it, you will need a circuit tester like Quickee Tester,
    view full answer...

  • Installing a Brake Controller on a 1988 GMC K 1500 Pickup Truck
  • GM did not install a brake controller adapter port in the C/K series pick up trucks, so there are no plug-in adapters that will allow you to install a brake controller without having to run wires. If you already have 7-way connector at the rear of your truck, then you could use wiring kit # 5506. This kit includes a duplex wire to run a brake output circuit from the brake controller to your 7-way and to run a wire from the brake controller to the battery (via the circuit breaker) and
    view full answer...

  • Troubleshooting Prodigy Trailer Brake Controller Causing Dash Light Errors
  • Sounds like it could be the way your brake controller was installed. I would first check the connection of the red wire, this should be connected to the brake light switch wire that is only active (hot) when the brakes are pressed. Since you have a 2008 this newer body style has been known to need to be hardwired when installing the brake controller to function properly. I have linked a step by step Help Article for you to look at. I would also recommend to clean out any corrosion
    view full answer...

  • Installing a Brake Controller on 2013 Mazda CX-5 with 7-Way Installed
  • Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle. For a wiring kit to install the brake controller and the 7-way adapter you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your vehicle to find a circuit that has voltage when the brakes
    view full answer...

  • How to Find the Brake Switch Wire to Install a Brake Controller in a 2013 Ford Edge
  • Traditionally (at least from 2004 to 2007) Ford has used a green wire on the brake switch to attach to the red wire on a brake controller. However, the only way to know for sure is to test the wires using a circuit tester like # 40376. Manufacturers can use any wire they want and if they run out of the normal color they use, they grab whatever is available to keep the assembly line moving. To test the wire use the circuit tester to probe the wires. You need the one that only shows power
    view full answer...

  • Recommended Wiring Harness for 2018 Buick Enclave and Tekonsha Brake Controller
  • For your Tekonsha Brake Controller, the custom wiring harness # 3026-P is not a confirmed fit for your 2018 model as it was for your 2011 model. At this time we don't have a confirmed fit from any of our manufacturers. It appears that Buick has changed their connector and the only fit at this time is hardwiring the brake controller. For that, you can use the Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long # 20127. I've attached a wiring
    view full answer...

  • Parts Needed to Install an Electric Brake Controller in a 2016 Toyota Highlander with Tow Package
  • To install your Prodigy P3 Electric Brake Controller # 90195 into a 2016 Toyota Highlander you can use the wiring harness # 20127. This will plug into the P3 and then hardwire under your dashboard. If the Highlander needs a 4-way trailer connector the Curt Wiring Harness # 56042 will provide one for you. Then you can use the install kit # ETBC7 to add a 7-way and all of wiring to power your trailer's brakes. If you already have a 4-way then just add the # ETBC7. If you already have
    view full answer...

  • Brake Controller Wiring Functions to Install on a 1990 Dodge D250 Pickup
  • The red wire that disappears under the dash of your 1990 dodge D250 pickup is input from the brake switch and will go to the red wire on the brake controller. Blue is output to the trailer brakes and connects to the blue wire on the brake controller. White is ground as you know and connects to the controller white wire and the fused red wire is for power which connects to the black brake controller wire. If you had switched the other red wire and the blue wire nothing would have happened
    view full answer...

  • Which Brake Switch Wire to Use to Install a Brake Controller in a 2017 Dodge Grand Caravan
  • The brake switch wire you will need on your 2017 Dodge Grand Caravan to install the PowerTrac # 39523 is the white wire with a green stripe. It should only have power when the brake pedal is pressed and not at any other time. The vehicle tail light circuit cannot be used because the brake signal is not the only circuit on that wire. I have linked a video that will help.
    view full answer...

  • Hardwire Trailer Brake Controller Installation on a 2001 Dodge Van 1500
  • Installing a brake controller on your 2001 Dodge 1500 Van is a hardwire installation. In addition to the brake controller and the wiring harness like # 20127, you may also need a 4 and 7 Way Installation kit, # ETBC7 depending on what type of trailer connector is on the van. If the van already has a 7-Way trailer connector, you will need to add a brake controller installation kit, # 5506. On the back of the 7-Way connector, find the wire that is coming out of the 7:00 position. Cut the
    view full answer...

Info for these parts were:

Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Zack K
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Joshua S
Video by:
Andrew L
Video by:
Zach D
Video by:
Jacob H
Test Fit:
Nicholas E
Test Fit:
Shane H
Test Fit:
David F
Updated by:
Sarah W
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.