View Cart

Tuson DirecLink Network Enhanced Trailer Brake Controller - 1 to 4 Axles - Proportional
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Ford

Part Numbers: 335DL-200NE,3036-S

Retail:$422.65

Our Price: $401.88

You Save: $20.77

This item qualifies for Free Shipping


In Stock
Tuson DirecLink Network Enhanced Trailer Brake Controller - 1 to 4 Axles - Proportional Up to 4 Axles 335DL-200NE
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed




Tuson DirecLink Network Enhanced Trailer Brake Controller - 1 to 4 Axles - Proportional
part number: 335DL-200NE

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. Pair with Tuson ActuLink actuator system for enhanced network monitoring.

Features:

  • Brake controller activates trailer brakes in proportion to your tow vehicle's speed, deceleration, and braking action
    • Automatically adjusts braking based on real-time data provided by your tow vehicle's computer network
    • Activates immediately - no pausing like with time-delayed brake controllers
    • Activates faster than accelerometer based brake controllers
  • Pair with Tuson RV Brakes' ActuLink electric hydraulic brake actuator system (sold separately) to create a digital, 2-way network for enhanced brake system monitoring and diagnostics
  • Automatic leveling ability - module can be mounted in any orientation without affecting operation
  • 20 Braking levels let you adjust initial braking power and aggressiveness
  • Large color display acts as a diagnostic tool for your towable brake system
    • User-friendly, 1-7/8" color display is easy to read
    • Diagnostics include trailer connection, tow vehicle battery voltage, OBD-II network connection, brake controller ground and power connections, brake switch voltage, blue wire power output, engine RPM, low-speed brake adjustment, and transmission temperature (Ford & GM vehicles using VPW/PWM network protocols)
  • Spring-loaded manual override lever allows you to manually apply 0-100% of your trailer's brakes
  • Easy plug-and-play installation
    • Automatically configures to your tow vehicle and trailer brake system
    • No drilling required
  • Application: trailers with up to 4 axles (8 brake assemblies)
    • Designed for use with electric or electric-over-hydraulic trailer brakes
    • Compatible with ActuLink electric hydraulic brake actuators (335ACT-1000 and 335ACT-1600) and Tuson ActuLink ABS systems (335ABS-DLNE-1000 and 335ABS-DLNE-1600)
  • Limited 2-year warranty


DL-200NE Tuson Direct Link NE Enhanced Proportional Trailer Brake Controller - 1 to 4 Axles





Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Ford
part number: 3036-S

Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the built-in harness behind your vehicle's dash.

Features:

  • Pigtail wiring adapter eases installation of your electric trailer brake controller
  • Connector end plugs into the built-in port beneath the dash of your vehicle
  • Wire end connects to the wires on your brake controller with the included butt connectors
    • Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
  • Limited 1-year warranty


Installation of Tekonsha Brake Controller Adapter

To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.


This adapter plugs into the connector behind the instrument panel in your vehicle's dashboard. Using a trim panel puller, carefully pry the panel out to remove the panel. You will find the mating connector behind this portion of you dashboard.


To hook this adapter up to your trailer brake controller, just connect the 4 wires of the harness - ground, power, brake switch, and brake power - to the corresponding wires on the brake controller. If your brake controller came with a plug built into its wiring harness, you will have to cut off the plug and connect to the wires themselves.



3036-S Tekonsha Brake Control Pigtail Wiring Adapter - Single Plug - Ford

Replaces Tow Ready 20272



California residents: click here



Video of Tuson DirecLink Network Enhanced Trailer Brake Controller - 1 to 4 Axles - Proportional


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tuson DirecLink Network Enhanced Trailer Brake Controller Review

Speaker 1: Today we're going to be taking a look at the Tuson DirecLink line of proportional brake controllers. Whenever we're towing a trailer or a camper like we have here, it's important that the brakes are going to be working properly. Whenever we slow down with our tow vehicle, we don't want to rely purely on that to slow our trailer down because we're adding so much extra weight. That's where our brake controller is going to come into play. Whenever we hit the brakes in a tow vehicle, our trailer brake controller is going to take that signal, and transfer it to our trailers, and have it apply the brakes.Now there are either going to be a couple different kinds of brake controllers. We're going to have a time delayed and a proportional brake controller.

Now, typically a time delay just has a preset timed amount that it pauses before it applies the brakes, and then it's going to ramp up to the maximum power. Now, our proportional brake controller is going to be a little bit different. It's going to take the deceleration of the vehicle and apply the brakes according to the trailer so they can work together.We're going to have three different models of our DirecLink brake controller. We're going to have the lite, the base model, and then finally the network enhanced model. Now, looking at them, they're all going to look the same and they're going to have a lot of the same features.

All of them are going to be a remote mount, so we're going to be able to mount the command module out of sight under the dash, and then the handheld control unit will be the only thing we'll see along with the cable.Now, each of them is going to come with a Delphi 4-pin connector, which is common on most brake controllers, and plenty of wire to get hooked up. You've going to have four wires. One for our brake signal coming from our brake pedal, a power wire, a ground wire, and then finally our brake output signal so we can get everything wired up. Now, the other cable coming out of the back of our brake controller is going to plugged directly into the OBD-II port on our tow vehicle. This is going to take all the readings from our vehicle so it knows how to apply the brakes accordingly.Now, there's not going to be any kind of sensors inside, so we're not limited to how we mount this like on some traditional proportional brake controllers.

It's not going to rely on that sensor inside to figure out how much we're slowing down since it's hooking directly into the vehicle's computer. No outside physical condition is going to affect how our trailer brakes because if we hit some bumps, go up or down a hill, or on some really rough terrain, if there was a sensor inside, that sensor is going to be getting jolted around. Well, this isn't going to rely on that, and we can mount this in any orientation that we want.Each unit is going to come with a control unit right here. It's going to be a handheld unit and have a nice, large display on it. Now, we do have the option of mounting it.

They're going to come with two mounting options, either a flat surface mount, or we're going to have a swivel mount here so we can mount it on the dash and have it in the easiest spot to reach and see at the same time. Again, like most brake controllers, it is going to have a manual override lever here. It's going to be spring loaded, so we can just reach over and push in if we need to take control of the brakes without putting the brakes on our tow vehicle.Each one of our controllers is going to work with trailers that have one to four axles or a total of eight brake assemblies. It's automatically going to configure to your tow vehicle as well as the trailer braking type, so it's going to work whether you have electric or electric over hydraulic brakes. Now, all of them are going to have a diagnostic feature to them. They're going to keep an eye on everything we want to make sure that we can monitor while we're towing. It's going to check the power and voltage at our brake switch, the output, as well as the connection at our OBD-II port to make sure that we have a good, solid connection there. It's also going to check the battery on our vehicle while we're driving.Now, if we step up from the lite to the base model, we're going to get a few more diagnostic features, but still have all the same ones from before. We're going to be able to monitor the transmission temperature, that way we can make sure that it's not overheating if we're going up and down a lot of hills, or if we're towing an extremely heavy trailer. Now, another big benefit of the base model over the lite version is that we're going to have low-speed brake adjustments. What that means is a lot times when we're going down the highway and we have our brake controller set, but as soon as we get off, our brakes are extremely aggressive and they're biting too hard. Now, we either need to deal with it or we need to readjust our brake controller.Well, this is going to take that out of there because we're going to be able to have our main adjustment for highway speeds, and then when we go below 30 miles an hour, we're going to have a low-speed brake adjustment, so we can tone it down if they're too aggressive, but if they're not aggressive enough, we can also bump it up a little bit as well. Now, one thing the base model has that the lite doesn't is that it is going to be compatible with HD trucks like Volvos or freight liners with an adapter that is sold separately.Now finally, if we get into the network enhanced brake controller, that one is going to have all the same features up to now, plus a lot more. Those are going to be specifically designed to work in conjunction with the actuator that goes with our DirecLink. They're going to be able to communicate directly and let us know a lot of different things that are going on. We're going to be able to check brake fluid level. If it gets low, it's going to give us a warning sign. It's also going to let us know the integrity of the connection at the brake controller and the trailer, and it's going to give us all the electrical diagnostic that we need, whether the voltage is low or the amperage is low, and it's also going to be able to tell us the temperature of our brake fluid level to let us know if we're going to need to slow down and take it a little bit easier on our brakes.Now, the network enhanced brake controller is going to work in conjunction and speak directly to the ABS module that is available separately as well. It's going to read all the sensors, let us know what's going on if there's a problem, as well as being able to read the pressure at the brake actuator, and any kind of temperatures, and let us know exactly what's going on with the ABS. If you're looking for a brake controller that's going to have that truly proportional braking, the lite is going to be a great option.Now, if you want a little bit more and you want to be able to read a little bit more of what's going on with your vehicle as well has having the HD compatibility, the base model is going to be a great one. Now, if you want to go all out and have ABS on your trailer, and have hydraulic actuator, and upgrade everything, the network enhanced one is going to be the best option because it's going to give us every available feature that we could ever want. That'll finish up your look at the Tuson DirecLink line of proportional brake controllers.



Customer Reviews

Tuson DirecLink Network Enhanced Trailer Brake Controller - 1 to 4 Axles - Proportional - 335DL-200NE

Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Ford - 3036-S

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. Pair with Tuson ActuLink actuator system for enhanced network monitoring. Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the built-in harness behind your vehicle's dash.

- 3036-S
by: Rick06/07/2018

As always parts and service are excellent. Parts fit great. 518825



- 3036-S
by: Tom08/18/2017

Fit perfect. Shipping was fast. 422265


2
2


Ask the Experts about this Brake Controller
Do you have a question about this Brake Controller?


  • What Vehicles Does Brake Controller Wiring Harness 3036-S Fit
  • Brake controller wiring harness # 3036-S has replaced the 20272 and will fit the following vehicles: 2009 - 2015 Ford, F-150, All Styles 2012 - 2013 Ford, Flex, with Factory Tow Package 2012 - 2015 Lincoln, MKT, with Factory Tow Package If you have a 2003 Ford Expedition you would need harness # 3035-S.
    view full answer...

  • Where Does a Brake Controller Plug Into on a 2017 Ford Expedtion EL
  • The brake controller port on the 2017 Ford Expedition is located behind the left side of the center console. There is a panel there with a vent, a knob of some kind, and a cubby hole. That has to come off and the port will be plugged into the back of the cubby (see instructions link for # 22292 ). There isn't enough space to reach up under the console to reach the port so removing that panel is the easiest way to access it.
    view full answer...

  • Brake Controller Install Harness Recommendation for a 2011 Ford F-150
  • What you will need is the part # 3036-S. This is the brake controller harness that has been confirmed as a fit for your 2011 Ford F-150 that will give you 4 blunt cut wires that you can then wire to the wires of your Husky brake controller. I attached an install video that shows a similar harness being used to install in a F-150 of the same generation as yours.
    view full answer...

Info for these parts were:

Edited by:
Lindsey S
Video Edited:
Jacob T
Installed by:
Cole B
Video by:
Chris R
Updated by:
Sarah W
Test Fit:
Robert C
Written by:
Kristina F
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Laura H
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Ford F-150 Accessories




Product Experts Available Now!

Call 800-298-8924