Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - GM

Part Numbers: 331-EBRH-ACCV2,3016-S


Our Price: $214.65

You Save: $44.28

This item qualifies for Free Shipping

In Stock
331-EBRH-ACCV2 - Out of Sight Mount Redarc Off Road Towing,Proportional Controller
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional
part number: 331-EBRH-ACCV2

Mount the control knob of this proportional controller on your dash or console, and affix the main unit in an out-of-the-way spot. 3-Axis accelerometer ensures unit works no matter its positioning. Switch modes to get preset braking for off-roading.


  • Brake controller activates trailer brakes in proportion to your vehicle's braking action
    • Automatically adjusts trailer's braking based on deceleration of tow vehicle
    • Activates immediately - no pausing like with time-delayed brake controllers
  • Control knob mounts in dash or other easily accessible area
    • Allows for fast and easy adjustment of braking power with turn of the dial
    • Lets you switch from proportional braking to user-controlled mode
    • Provides accessible manual override - just press the knob to activate
    • Offers simple diagnostics with bright, colored LED
  • Main unit installs out of sight
    • No more banging your knee on a bulky controller
    • No interference with airbags or other vehicle accessories
    • No hard-to-reach override lever or impossible-to-read screen
  • 2 Different braking modes available
    • Set in proportional mode for everyday use
    • Get absolute control over trailer's braking activity with user-controlled mode - great for off-roading
  • 3-Axis accelerometer measures deceleration in all directions for precise braking and smooth, uniform stopping action
    • Can be mounted at any angle and will still accurately sense the deceleration of your vehicle
  • Active calibration technology continuously monitors your direction of travel and adjusts brake response accordingly
  • Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
  • Made in Australia


  • Application: trailers with up to 3 axles (6 brake assemblies)
    • Designed for use with electric or electric-over-hydraulic trailer brakes
    • Works with 12-volt and 24-volt vehicle electrical systems
  • Main unit dimensions: 3-3/8" long x 3-15/16" wide x 1-1/8" tall
  • Control knob dimensions: 2-3/8" long x 3/4" wide x 7/8" tall
  • Output voltage range: 9V - 32V
  • Output current rating: 25 amps continuous
  • Maximum charging voltage: 12V DC
  • 2-Year warranty

REDARC Tow Pro Elite Remote Head Diagram

Proportional Braking

With a proportional brake controller, you can get heavy-duty emergency braking, general braking or slow-to-an-idle braking for your trailer automatically. The intensity with which your trailer brakes are activated and the rate at which they are applied are dependent on the deceleration of your tow vehicle. This means that, unlike time-delay controllers - which send the same amount of preset power to your trailer brakes every time - proportional controllers are able to adapt to every braking situation differently. So, if you slam on the brakes in your truck, your trailer brakes will activate with that same extreme intensity. And if you merely slow down as you approach a red light, your trailer will gradually brake in the same manner.

Once the Tow-Pro Elite is mounted, it will sense - via an internal 3-axis accelerometer - how your tow vehicle brakes. This inertia-based sensor responds to the deceleration of your tow vehicle as you brake by signaling the controller to send out enough power to your trailer brakes so that they are activated with an intensity that matches. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.

Tow-Pro Elite Operation

The dash-mountable control knob makes it easy to control your trailer's brakes. In addition to offering fast, simple power adjustment, this knob has an LED indicator that changes color to display different information about the controller.

Redarc Tow Pro Elite Proportional LED Display

While the unit is initially calibrating, the LED light will signal its progress. The LED display will flash green/blue as it seeks to take in information about your vehicle's direction and speed. When the display turns solid blue, the system is set and functioning completely in proportional mode. After this process is complete, the unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.

You can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the switch clockwise. To decrease the power output, rotate it counterclockwise.

Redarc Tow Pro Elite Brake LED Intensity

When you apply the tow vehicle's brakes, a red LED light will inform you that power is being sent back to the trailer brakes. As you increase the power with the control knob, the light will glow brighter, indicating the increased braking power.

Should you want a higher degree of control over the trailer's braking, you can use the control knob to switch over to user-controlled braking mode. To change modes, rotate the knob counterclockwise and apply your vehicle's brakes. Then push down on the remote knob twice (2 times within 1 second) and release the brakes.

Redarc Tow Pro Elite User Controlled LED Signal

User-controlled mode is signaled by a green LED. In this mode, the Tow-Pro Elite will apply your trailer's brakes with the same preset amount of power each time you activate the brakes in your vehicle. While in user-controlled mode, the braking power can be adjusted by turning the control knob in the same manner as when you are in proportional mode.

Having this level of control over your braking is particularly beneficial when overlanding or towing a trailer off-road because you may need to alter the trailer's braking based on the specific terrain and situation that you find yourself in. Set the power low if you're towing through sand or mud so that the trailer doesn't stop with too much force and act as an anchor on your vehicle. When on a steep descent, set the power to a higher level to ensure that the trailer's momentum doesn't cause it to push against the tow vehicle.

The Tow-Pro Elite gives you easy access to manually apply the trailer brakes without using the tow vehicle's brakes. To engage the manual override, just push down on the control knob. This will activate the trailer's brakes, helping you to control its momentum.

The manual override will activate your trailer's brakes differently depending on the mode you have selected. While in user-controlled mode it will apply the brakes at the power level set on the control knob to ensure a predictable braking response. When in proportional mode the manual override will activate the trailer brakes in a light manner, which is great for limiting trailer movement while you're cruising.

Simple, Out-of-the-Way Installation

Unlike most proportional controllers on the market, the Tow-Pro Elite has almost no mounting restrictions. It comes in 2 pieces - the main electronic unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted in an out-of-the-way location. So you no longer have to worry about a bulky brake controller scraping against your leg or causing interference with your vehicle's lower airbags.

Redarc Tow Pro Elite Dash Mounted Remote Knob

The dash-mountable control knob can be mounted in a convenient spot that is easy for you to see and access. This can be a blank switch panel, an open area on your center console, or wherever there's space on your dashboard. A universal mounting panel (331-TPSI-001 - sold separately) is available to ensure a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well.

REDARC Tow Pro Elite Flexible Installation Position

Once you have determined where to mount the control knob, you will want to find a good place to install the main unit. The only mounting restriction for the unit is that the included 3' plug-in cable is able to reach between the main unit and the knob.

Thanks to the 3-axis accelerometer, the main unit can be positioned at any angle. There is also an active calibration feature, which constantly evaluates the direction of travel of your vehicle. This enables the unit to recognize any change in position that may have resulted from potholes or back-country roads and automatically correct itself. Because this feature can read the direction of travel, the main unit can also be mounted facing any direction, allowing for even greater flexibility in mounting.

REDARC Tow Pro Elite Harness

The included wiring harness hardwires into your vehicle's wiring and then plugs directly into the main unit. You can also use a vehicle-specific wiring harness to cut down on installation time. These harnesses are available for most newer trucks and SUVs. One end of the custom harness will plug into your vehicle, and the other end will hardwire onto the Tow-Pro harness that plugs into the main unit. Once all connections are made, securely mount the box using screws or double-sided tape. Do not zip-tie the box to wiring or cables that can shift as you drive.

For assistance in properly wiring the Tow-Pro Elite, please refer to the diagrams below:

Redarc Tow Pro Elite Wiring Diagram

Installation Accessories

See's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.

Note: A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may be required for installation.

EBRH-ACCV2 REDARC Tow Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional

California residents: click here

Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - GM
part number: 3016-S

Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the junction box beneath your vehicle's dash.


  • Pigtail wiring adapter eases installation of your electric trailer brake controller
  • Connector end plugs into the built-in port beneath the dash of your vehicle
  • Wire end connects to the wires on your brake controller with the included butt connectors
    • Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
  • Limited 1-year warranty

Installation of Tekonsha Brake Controller Adapter

To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.

This adapter plugs into the 4-pin connector in your vehicle's junction box. The box is located underneath the dash, to the left of the steering column, just above the carpeting.

To hook this adapter up to your trailer brake controller, just connect the 4 wires of the harness - ground, power, brake switch, and brake power - to the corresponding wires on the brake controller. If your brake controller came with a plug built into its wiring harness, you will have to cut off the plug and connect to the wires themselves.

3016-S Tekonsha Brake Control Pigtail Wiring Adapter - Single Plug - GM

Replaces Tow Ready 20275

California residents: click here

Video of Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Redarc Brake Controller - Off Road Towing - 331-EBRH-ACCV2 Review

Speaker 1: Today we're taking a look at the Redarc Tow-Pro Elite Trailer Brake Controller. This brake controller is easy to install and operate. It delivers smooth, safe trailer braking no matter the situation. It offers two modes of braking, allowing you to select the best fit for your current road conditions, vehicle type, or driver preference.What you actually get in the box is what I have laid out here on the table. This right here is just a demo model for demonstration purposes today. Again it does offer two modes of braking.

You have proportional or automatic mode. That's designed for highway conditions. It activates the trailer brakes in proportion to your vehicle's braking action. Then you also have user controlled mode for off-road conditions. In that mode the trailer brakes are applied to the level that is preset by the driver, or that is set by the driver.It also features manual override and to do manual override all you have to do is press the knob on the dash mounted switch and you can do that in either the automatic mode, which applies light braking, or user controlled mode, which applies the preset level.

The unit will also remember the last mode you used every time you start your vehicle. Now using a feature called active calibration the unit will calibrate with or without a trailer attached and it constantly monitors the direction of travel.One of the neat features about this system is that the brake controller can actually be mounted in any direction, meaning it can be mounted almost anywhere. It does not have to be mounted on the dash in a traditional location, so that's going to free up a lot more leg room. You don't have to worry about knocking this loose or hitting your leg on it as you get in and out of the vehicle. It can easily be mounted in a location that works best for you as long as it mounted in a fixed position and all the wires can still be connected where they need to go.This right here is the dash mounted control knob.

It puts braking at your fingertips. You'll notice that there's no slide or buttons on the actual controller. This does not take up much space at all. It can be mounted directly to the dashboard, to the center console, or through a spare knockout switch panel. It does require two holes to be drilled out, as indicated in the instructions.

It's a nice clean look once it's installed and again it doesn't take up much space at all.Now this unit is designed for trailers with up to three axles, that would be six brake assemblies. It's designed for use with electric or electric over hydraulic trailer brakes. It is capable of operating 12-volt trailer brakes from 12-volt and 24-volt vehicle electrical systems. The acceptable voltage input ranges between 9-volt and 32-volts.Now I just want to go over some of the basic components of this unit. Again there's two modes. Your modes are indicated, you can tell what mode you're in by what color this LED is. If it's blue, that means that it's in the proportional or automatic mode. If it's green, that means that it's in the user controlled mode. To switch between the modes, you want to make sure that the switch right here is on zero. Press your brakes and press twice. That's going to switch between the modes. Again, blue LED, that means trailer brakes are applied proportionally to the vehicle. The harder you brake, the more the brakes are applied to the trailer. As you push down on your brake pedal, the signal is sent from your vehicle back to the trailer in proportion to the amount that you're pushing the brake pedal.To switch between the modes, put it on zero, brake pedal down. Double tap. Let go. Now green LED means that you're in the user controlled mode. You can set it to whatever level you want. Zero is no braking. 10 is full trailer braking. Then it will automatically send back that amount that you just set. As you press the brakes you'll notice a red LED. That's the braking force, so it's indicated by the LED changing to different shades of red when the brakes are applied. It's very visual as well, so that's another great feature about this system. Then to take advantage of manual override, all you have to do is press the knob for manual override in either the automatic mode or the user controlled mode.With this you're going to get your compact controller, 4" long by 3-5/16" wide by 1-1/8" thick. You'll get the dash mounted control switch, which it has a positive engagement design to it, so you can feel it. You can feel it set into place. You can almost feel the incremental adjustments, so that's a nice reassuring design of the unit. You can push it as well, again that's how you change between your modes. Then it comes with your wiring harness. Plugs into the controller there. It's got the exposed wires on this end and on the casing of each wire. It's labeled with its function. This wire right here connects to the back of the dash mount switch and to the controller.Comes with a quick and easy set up guide. Also goes over those functions with the LED colors that we just talked about. It comes with nice detailed installation instructions that walk you through the entire set up and install process step-by-step. That's going to do it for today's look at the Redarc Tow-Pro Elite Trailer Brake Controller.

Customer Reviews

Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional - 331-EBRH-ACCV2

Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - GM - 3016-S

Average Customer Rating:  4.8 out of 5 stars   (185 Customer Reviews)

Mount the control knob of this proportional controller on your dash or console, and affix the main unit in an out-of-the-way spot. 3-Axis accelerometer ensures unit works no matter its positioning. Switch modes to get preset braking for off-roading. Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the junction box beneath your vehicle's dash.

- 331-EBRH-ACCV2
by: nunzio07/03/2018

ok we will just get this out,s installed....not used yet....if it,s half as good as dan at etrailer said it is ..well my next review will be 4 or 5 stars...but.....the install..was at best....a 3....not that the wiring was was not (42 years as a mechanic)... distructions....fine...but i dont like anything in metric..this is the US OF A..inches work great....i problem is the little diel controller it only will fit a thin piece of plastic to mount to..i wanted to use a nice piece of 1/4 inch mahogany..for a nice back plate..nope....they give you no more room then about 1/16 thick to drill and mount to.....and you better have the 2 holes perfect...or no go..if the technology is so good...then make it on a little mounting plate for the US market..we dont have laws on how are dash is to 2 cents 529836


im back..after 1 yr the unit is still performing like it should..i can say this is the first bk controller ive had that is very smooth on the jerking or loosing its very well and i do loke that there is nothing showing or in the way .but one little nob...

nunzio - 07/03/2019


- 331-EBRH-ACCV2
by: John03/03/2018

The controller was received promptly and installed in our 2018 Winnebago which is on a Ford E450 chassis. The control knob was installed in the center of the dash next to the battery jumper switch and the control module was attached to the drivers side of the engine cover out of the way of the drivers legs. It was connected to the factory brake controller connector via the 3040P connector spliced into the Redarc module connector. It was tested by the method described in the manual and so far seems to be working OK. Will not be towing a trailer for some time so can't give any feedback on actual usage at this point. 480818

- 331-EBRH-ACCV2
by: Greg E07/11/2018

Here's a Tow Pro install on a 2017 Honda Pilot Touring toggle blank. 540479

- 331-EBRH-ACCV2
by: Rick09/23/2018

Wow what a great product. Easy to install. I really like the way it automatically adjusts and the remote mounted controller can be virtually placed anywhere in the vehicle. I used a blank to install the remote. 568018

- 331-EBRH-ACCV2
by: Tony02/10/2018

Came with a harness to plug into a factory connector, which made installation pretty easy. However.. The knob assembly comes with a template, which is incorrect. Got the hole reamed out so it fits, only to find out the washer that is supplied makes the mounting surface so thick, you cannot mount the assembly. Had to mount without the washer, and you'd never know it. I just installed it, so have not hooked up a trailer to it yet. 474562

- 331-EBRH-ACCV2
by: Lawrence07/29/2018

Installed in 2018 Jeep Grand Cherokee Trailhawk. Easy hook up to Jeep OEM towing harness. Wire colors were different between Jeep and Redarc but easily matched between the two plugs and documentation provided. Located control switch on shift console with control module dial anchored in location as videos show. Needed to grind down plastic cross hatch stiffener on underside of shift/cupholder console using Dremel tool to obtain a flat surface to mount and anchor the control switch. 547472

- 331-EBRH-ACCV2
by: Brent C.05/05/2018

Wanted a brake controller that allowed for a clean look. This fit the bill perfectly. With the optional Toyota mounting panel I popped out one of the unused factory blanks and this popped right in and looks and works great. 504759

- 331-EBRH-ACCV2
by: Nathan10/02/2018

Cleanest install over the typical knee killer hung under dash. Wasn’t super impressed by install kit offered for traditional unit install for my 2014 Tundra. Found this unit on website while pricing out, this by far is the way to go. I got the switch plate kit for the best look (I painted lettering) and made a ridged mount bracket for the unit (solid mount required from the controller, can’t just tie to harness). Took me 2 hours top to install and it’s as close to a factory unit as you can get. Switch is mounted under the ac controller and the unit is mounted on left side of steering column hole was already on the truck. Only drilling was on the bracket I made. I had the factory harness to plug unit into truck and wired it to the one from REDARC for the controller. It’s well worth the effort. 571008

- 331-EBRH-ACCV2
by: Joseph03/19/2018

The etrailer team made this install super easy. I was able to dremel out the stock Tacoma dash blank to make the brake controller fit. The dremel with the right bit works great. I did have a bit of trouble locating the correct connector on the wiring harness but once it was located the rest was a breeze. I'm still not completely sure on the controller mounting location but it's up and it's secure. I get to test the controller out soon so I'm hoping for good results. 486729

- 331-EBRH-ACCV2
by: Steven10/05/2018

Bought a 2019 Subaru Ascent with the factory installed tow package. Adding this brake controller was very simple given Subaru includes the adapter to plug in under the dash. I simply connected the four TowPro wires to the Subaru adapter and plugged it into both controller and car (I didn't even have to remove any kick panels! I then zip-tied the controller box under the dash, drilled the 10mm and 3.5mm holes for the switch (in the fuse box cover door), and plugged it in. DONE!!! I pull a 16 foot V nosed Haulmark trailer with 5 go karts. No problems thus far. My only nit pick is that I bought this controller because it is small an indiscreet. Well, I wish it was perhaps 20% smaller still SO THAT IT FIT MORE PERFECTLY in one of the accessory knock-out panels on the dash. 571926

- 331-EBRH-ACCV2
by: Kevin08/25/2018

Just bought the Redarc Tow Pro Elite. Installed it in less than 30 minutes. The controller hides in the glove compartment. Hooked up my new trailer and the Redarc “auto learned” in a matter of a few minutes of driving. Didn’t take long for me to forget that the trailer was back there, even when hauling 4 horses 558135

- 331-EBRH-ACCV2
by: Samuel10/01/2018

I am disappointed with the "Dash Mounted Remote Head Assembly". When installed according to directions, if the unit is tightened as per instructions it will not allow the override or switching between manual and proportional modes. The only way to continue to be able to depress the knob is to leave the head unit loose. The head nut cannot tightened per instructions and still allow mode changes. Unit was installed in a 1998 Ford F150 and placed on the dash near the steering column. 570526


I contacted our Red Arc contact and they believe the section of the dash you have the knob installed into is too thick. You will need a mounting panel part # 331-TPSI-001 to allow the control knob to depress all of the way. Please keep in mind this mounting panel will only install into dashboards that are less than 9/32 thick.

-- Heather A - 10/02/2018


- 331-EBRH-ACCV2
by: John07/02/2018

I installed this into my 2018 Tacoma. I'm not super mechanically inclined, but this was a very easy install. I looked at an article on an online forum and watched the etrailer video of them hooking it up to the 4-Runner and that was all I needed. I used tthe brake harness adapter that goes from the brake harness into my old brake controller. (Tekonsha 3017P). I connected the wires from the brake controller to the adapter with butt connectors. Everything else was plug and play. I found a spot under the dash and used velcro to secure it. The remote knob fit into the dash no problems. I used their dash plate to mount it into one of the blank spots. I took the truck out with my trailer and everything worked like a champ. I couldn't be happier. No more banging my knees on the old brake controller that was mounted in a crappy spot before. The remote knob looks like it's from the factory. 529272

- 331-EBRH-ACCV2
by: Kevin06/01/2018

I just got this unit installed! Etrailer made it plug and play easy for me by providing the correct pigtail adapter the first time. It took awhile only because I needed to figure out where I was going to locate everything. Once that was decided it went quickly. Reading the directions goes against the “man card” possibly but it was helpful to know how the unit learns its’ orientation. After a short drive with many brake applications it was set to do its thing. Works wonderful and it is really nice to not have a knee knocked under the dash panel!! 515243

- 331-EBRH-ACCV2
by: Edward06/15/2018

Product was exactly as advertised. It turn out to be more difficult to find locations for the controller and control knob than expected but worked out in the end. Tommy in product support was very helpful. Vehicle Lexus GX470. 522245

- 331-EBRH-ACCV2
by: Flight Test Elvis06/05/2018

This was a researched and implemented purchase to my 2018 Toyota Tacoma PU! Very satisfied with the installation "look" and functionality. I also purchased the plug and play wire harness that utilized the OEM "Tow Package" wire connection. Would recommend this over the "other" aftermarket units available as this looks factory "I think even better than" what Toyota offers in the Tundra line of units. Suggest if you are in the process of selection view all the [on-line] videos on the unit. Review and study the PDF instructions for familiarity. As an FYI I had the unit installed by a local "Pro" show whom had never seen a Redarc unit. They now want to offer and carry it for customers. 517607

- 331-EBRH-ACCV2
by: Jerry02/22/2018

Great idea, makes for a very clean look, lets you put the trailer brake control almost anywhere on the dash or console. One does not have to lean down to operate the brake controller anymore. It installed nice in a 2018 Silverado, good thing the box can be mounted in any position, hard to find room under the dash in new trucks. 478028

- 331-EBRH-ACCV2
by: Jim D01/19/2018

The product was shipped as requested and was throughly packaged professionally and met my high expectations. Thanks for Bryan’s professionalism. The product so far has met my expectations. These wheels wouldn’t be turning if it wasn’t for Bryan! Thank you again! Highly recommend. 468273

- 331-EBRH-ACCV2
by: Randy V04/02/2018

Just finished the install of the Redarc Tow pro elite controller in my 2012 Toyota Tacoma. 491814


Its working great!. Glad I went with the Redarc.

Randy V - 04/02/2019


- 331-EBRH-ACCV2
by: Gary K.03/10/2018

Just finished installing my brake control. Installation was easy with a video for my specific truck. Have not had a chance to test the brake control but I am confident it will perform as advertised. Even though this brake control does cost a little more, I like the idea of it braking the same amount of brake pressure that the tow vehicle brakes. At the same time, you can operate the brake manually if so desired. I have purchased numerous items from etrailer and the customer service has been great. They take the time to make sure you are getting the correct product for your needs. I would not hesitant to recommend etrailer. 483310

- 331-EBRH-ACCV2
by: Shane06/01/2018

This thing Is very slick!!! Compared to the other controllers I've used in the past this so much nicer. Install is more advanced as I had to take part of the dash apart on my pathfinder to get at the back of the blanks. But sooo much nicer than drilling holes in you dash and banging your knees on this ugly box that is always in the way. This looks way closer to OEM. One great thing is that the box can be mounted any way and hidden. It takes the unit a little while to learn, about 20 brakes or so. My only complaint would be there was no install blanks available for my type of vehicle. So I used the universal which sits over the blank hole instead of flush. This is a minor detail overall compared to the alternative. Over all works very well, looks very slick, and is very user friendly. One thing I really like is how easy it is to adjust up or down on The fly, just turn The little knob. Even if your not looking at it you get a satisfying little click. The only one I would buy now that I have one. Recommended, high quality, and worth the extra money. 515026

- 331-EBRH-ACCV2
by: Cameron L.04/11/2018

This product is well worth it. I installed it on a 2015 Toyota 4runner for use with a travel trailer. I decided to go with the RedArc Tow Pro Elite for aesthetics. Installed very easily and looks stock when in Auxiliary location. Traveled 1,400 miles a few days after the install with the trailer and it did GREAT. Couldn't ask for better. The employee's at etrailer were extremely helpful when deciding what product to purchase and shipping was faster than estimated. 495172

- 331-EBRH-ACCV2
by: Jason08/26/2018

Installed in a 2014 Toyota Highlander behind the driver side dash. Used "extreme" double-sided adhesive foam to mount to flat surface rather than screw into something important. Ordered the custom fit accessory button for a factory look. Drove 250 miles over a mountain pass with it - worked perfectly. I like that it is hidden from few accept for the control knob. 558389

- 331-EBRH-ACCV2
by: Daniel09/07/2018

Just got done with the install. Came out outstanding. I love the fact that all you see is the control knob while the control module box is hidden under the console. I haven’t used it towing yet but will try this week. 562701

- 331-EBRH-ACCV2
by: Fred10/16/2018

Just installed the Redarc brake controller in 2008 Silverado. First, it is nice and compact. Watched the video to install and tried in my truck. Had a hard time getting it to fit in the same space. When I tightened it down, it came apart. Had to take everything apart and reinstall making sure to keep it flat. Not easy as my truck has no flat surface to mount it. Mounting the control knob was easy as there was a nice space to the left of the column in the lower panel. To take the panel off ,remove the bolt holding the brake release, it makes it easier. Have to finish wiring and will review again after I pick up the trailer. Took me more than 2 hrs. so far, but I am 72 and can't limbo anymore. 574986

- 331-EBRH-ACCV2
by: Ron H.09/09/2018

The REDARC cost more than other brands, but is much more user friendly and worth the extra cost considering your life will depend it. My experience with etrailer was unbeatable: best pricing and knowledgeable folks who actually answer the phone. My unit shipped free and arrived in 3 days. 563284

- 331-EBRH-ACCV2
by: Bryan04/05/2018

RedArc install on 2008 Toyota Tacoma. The RedArc works great. Clean install without the ugly control box to knock your knee on. Very well constructed. Trial run was a trip from CA to MN through the mountains. Brakes worked smoothly and didn't even know the trailer was there. 492658

- 331-EBRH-ACCV2
by: Ellen02/28/2018

Products were great but real reason I'm giving a 5 star review / spending time on this is because of the great customer service. Lindy A was super helpful and knowlagable. We talked for over 45 min before I even decided to buy anything. Would go back for any trailer needs for sure. 479910

- 331-EBRH-ACCV2
by: Aaron10/12/2018

Just installed it in a Sprinter with factory pre-wire and took it for a ride, works great so far but it's too early to write a review. One thing I absolutely love about the Redarc Tow-Pro is that the wire between the Brake controller and the Control Knob is a regular CAT-5 network wire, no need to buy any extensions or build your own cable, those network cables are available everywhere in all kinda colors and lengths. 573944

- 331-EBRH-ACCV2
by: John10/04/2018

Easy installation and both the proportional and maual mode work great . Would highly recommend for a nice hidden looking brake controller 571407

- 331-EBRH-ACCV2
by: Dan S.09/17/2018

The system works very well, but it's a bear to mount in a Sprinter cab. There just isn't a good place to install the button, and the Sprinter dash is a complex mess. I used the universal adapter and drilled a new hole. Wasn't in exactly the right place, and thus caused significant extra work, but that's not the fault of the product. 566057

- 331-EBRH-ACCV2
by: Bruce03/07/2018

Received the product quickly and am impressed with how small it is. Just what I was looking for. Going to install it this weekend! 482188

- 331-EBRH-ACCV2
by: Windin07/21/2018

Easy install, instructions are clear and well written. I chose to mount the adjuster dial on the lower center console with a bracket and velcro instead of drilling any holes. the actual unit I mounted with carpet screws to the left and above the e brake pedal. Toughest part was finding the factory harness connection on my 2019 Honda Ridgeline. it is hidden above the ODB port towards the driver door. 544128

- 331-EBRH-ACCV2
by: Paul04/23/2018

Installed the Redarc Tow-Pro Elite Trailer Brake Controller in my 2016 Chevy Colorado Attached are the pictures. I put it next to the light control knobs where it could be seen from the drives position through the steering wheel spokes. 499943


I have installed and used several different trailer brakes over the years, the installation of this unit was easy to moderate, but the operation of the brake system is far superior than other units I have used. I installed the unit in my 2016 Chevy Colorado v6 and did a recent 340 mile round trip, at freeway speed and then up a and back down a, steep at times, mountain highway. Often, I find I have to turn the brakes output force down when I get off a freeway and into town if the brakes have gotten warm and get grabby. I found this unit didnt require this as often, and sometimes not at all, and when it did it was easier to do so. The output knob has clicks you can feel, so you can turn the unit down 3 clicks when you in town and then up 3 clicks when you get back up to speed on a highway. It has numbers on the dial, but bottom line is you dont have to take your eyes off the road to look at it to make the adjustment! I used the Proportional mode for the trip and it was much smoother than my last unit, especially handling the rush hour stop and go traffic didnt get grabby. The ability to switch on the fly between Proportional and User Controlled operating modes worked flawlessly, as I tested it on the dirt road when we got to camp. I did laminate the card they provided on how to switch modes, and put it in the glove box, as it is a 4-step process, and I typically can only remember 2 steps of any processes after about 2 days just me. Also, the automatic parking brake if you stop for a while worked very well and was a nice extra I didnt realize I liked and needed. The fact you can mount the controller Main Unit and the Remote Head Assembly in different places and in any position made the installation extremely nice. Under the drivers kick panel, of my truck, is a metal plate that can be unbolted, so I was able to mount the Main unit on this plate while working on my work bench, much easier! I was also able to mount the Remote Head in a place I could see it while driving. Again, I found this was not as necessary as I thought, because of the click feature, but you need to mount it where you can find it quickly if you need to push the Manual Override Mode button to stop trailer sway. Because I could mount the Remote Head where desired it gives the final installation an OEM look, which is nice and not in the way. The only issue I had was the Remote Head unit I received was faulty. Once I pushed the Manual Override Button in it got stuck and staid that way unless I pulled on it faulty return spring. The manufactures sent a new one right away, and the new one works with no issues. The only sort of hard part with the installation is you have to take some care mounting the Remote Head unit, as you have to drill a large and small hole very close to each other, and the spacing tolerances are very tight. To do this I drilled the large hole 1st. The unit comes with a plastic washer with both holes in it, so I put the drill bit back in the large hole, put the plastic washer over it. This let me use it as a guide to locate and drill the small hole. I had to drill the small hole 1st with and undersized bit, that fit through the small hole. You then have to go back with the correct sized bit and finish drilling out the small hole it has a tab that goes needs to go into the hole.

-- comment by: Paul - 06/14/2018


- 331-EBRH-ACCV2
by: Mark02/26/2018

Excellent form factor. The remote control head makes for a clean install that can be placed any where convenient for the driver. Well worth the premium price. 479283

- 331-EBRH-ACCV2
by: 2016 Honda Pilot Owner04/19/2018

The Redarc Tow Pro Elite was installed on our 2016 Honda Pilot this was exactly what I was looking for it looks like a factory installed brake controller. Pros: The Redarc Tow Pro Elite was easy to install match the wires with the harness wires and that’s it this is a very nice system .The unit is small which is great gives you multiple options to mount the unit under the dash. Cons: the 90 degree fitting on the Ethernet cable gave me some trouble with installation Operating: To see if unit is operating correctly it needs to be connected to a trailer. Once connected to the trailer apply brake and the system will light up and follow the instructions to setup you unit. 2016 Honda Pilot Installation: I mounted the unit above the emergency brake under the dash there was plenty of room to mount it there .I was able to secure the unit using heavy duty zip ties and industrial two sided tape. I used the recommended butt connectors to attach the wire from the Redarc to the Quick connect wire. Once connections were made the system was all hooked up. FYI on installation :If you ordered the trailer hitch and had it installed from the dealership they should have given you the extra arts from the Kit to install a brake controller. To save a few bucks it comes with a quick wire harness and a 20A mini fuse. The fuse is very important you need to install it in the secondary fuse box under the dash follow instruction from the Kit my system didn’t work because fuse was not installed. Another FYI is when installing the switch reverse Ethernet cable use the straight part not the 90 you run into issues because on the backside there is a metal plate and it wont allow the you to push the switch in all the way and it wont sit flush. 498083

- 331-EBRH-ACCV2
by: Land Cruiser 20006/01/2018

Everything was great and led to a very clean install. Note that by being hardwired, there is always a small power draw whereas an externally housed self-contained unit may not. Second, Redarc’s instructions appear to be incorrect in one respect: when the unit is first installed but with no trailer present, it does not pull green and blue while calibrating. 515838


There will be a small power draw when the vehicle is off to the unit to keep your stored settings. It is not enough power draw to drain the vehicles battery. I contacted redarc and they said that during calibration the unit will pulsate green and blue. Once the unit is calibrated it will be solid blue.

-- Heather A - 07/14/2018


- 331-EBRH-ACCV2
by: Christ05/02/2018

Installed on 2017 Nissan NV 3500 Passenger Van. Straightforward and easy install. I used the factory provided harness and spliced them together. Hint: The Illumination wire on the Nissan harness isn’t used. I purchased the Redarc Universal Mounting Panel to make the install look factory made. Just got it installed. Hooked up to trailer to make sure it was working but haven’t yet went for a trip. Only issue I had was the universal mount has some play (see photos) to the top and bottom so I just centered it for now and later will go back and shim it into the center for good. For me, this product was worth the extra money it costs to have the control box hidden away and not be a “knee-banger”. 503330

- 331-EBRH-ACCV2
by: James12/25/2017

Installed on 2018 Chevy Colorado Extended Cab Pulling a [email protected] S Max @ 2800# GVWR Installation was straight forward. About the same difficulty as any other under-dash installation with the advantage that the brainbox can be at any orientation, completely hidden, and inaccessible. Only the small control knob must be dash-mounted. Braking is very smooth and effective. The controller has much finer adjustability than others I have used, and initial set-up is simple. 462658

- 331-EBRH-ACCV2
by: Rodney04/18/2018

Good snowy morning. I installed my brake controller today. 2017 Silverado 1500 Crew Cab I removed one of the 12 volt outlets and used the Universal adapter (fits a bit loose but some electrical tape firmed it up. Controller brick is in the space under the cup holders. 497984

- 331-EBRH-ACCV2
by: Josh M.09/30/2018

Installed it in my 2018 gmc Sierra this morning. Unfortunately the trailer hooked to my truck doesn't have brakes on it yet so I don't know how functional it is as of yet but I do like the design. It definitely is easier on the eyes than the standard brake controller and out of the way. I've never had a proportional controller but I believe it'll work great. 570404

- 331-EBRH-ACCV2
by: Robert04/02/2018

I purchased this brake Controler with confidence.e trailer is very reputible . So when I brought it to my Chevy dealer to install for me they showed me a deficit In the control unit so the installer couldn’t finish. The receptical for the Controler wire fell off. I called e trailer and they got me a new one in a short time so thank you it’s installed now 491967

- 331-EBRH-ACCV2
by: Paul08/21/2019

I only gave the controller 4 stars because I have not used it towing a trailer yet, only tested it on my friend's trailer for proper operation. I just purchased a 2019 Toyota Land Cruiser and plan to purchase a 23 foot trailer to pull with the Land Cruiser. I took my "old" brake controller out of my other car and planned to use it for the Land Cruiser. I found that the places to put the "old fashioned" controller were very limited in the Land Cruiser and it would get in the way of the driver's knees. So I did some internet research on what I could buy to avoid that problem. I found several reviews comparing the TowPro to other controllers and then I found a youtube demonstration of how to install one in the dash panel of a 2018 Land Cruiser. I ordered one and installed it very easily, with the extra insert that replaces a blank insert in the left panel of my new dash. It looks great, it is out of the way of my knees and easy to reach. It appears to set up without any extra work by me, which I like. The only small problems I had were: 1. I needed to be shown how to take the dash panels out and reinstall them by the Toyota Dealer; and 2. The small plastic ring washer that comes with the switch was not needed in the install with the insert. It took some research on line to figure that out. Other than those two things the install was easy and was completed in about 2 hours, which included connecting the wiring from the TowPro connector to the Toyota connector for the under the dash connection for lights and braking. OH yes, one more thing. If you are going to install this in a Toyota Land Cruiser, I could not find anyone that knew exactly where the underdash connector was, not in the manual and not at the dealer. I found where by looking at the youtube install on the 2018. So far I am very pleased with this equipment. With some actual use I may even give it 5 stars. 692012

- 331-EBRH-ACCV2
by: Tarantula45408/11/2019

Redarc Tow-Pro Elite Trailer Brake Controller was a perfect fit for my 2005 Colorado Z71Crew Cab where there is no room under the dash for a standard size controller. Mounted the control knob by the cup holders for easy access. 683743

- 331-EBRH-ACCV2
by: Dave J08/11/2019

I ordered this one since my '15 Honda Pilot doesn't leave you much room to install a brake controller. This one fit well, the control knob went into a blank panel easily, looks good. and a year later this product is still working well! 683728

- 331-EBRH-ACCV2
by: Patrick B08/11/2019

This brake controller is def worth the money. Plus looks nice and simple to use. 683532

- 331-EBRH-ACCV2
by: John M08/09/2019

Instructions were easy to follow and made installation straight forward. Operation has been good. 682618

- 331-EBRH-ACCV2
by: Dean08/06/2019

I installed this on my 2018 GMC Canyon. I've only had this installed for a short time and haven't really been able to put it through it's paces. The installation was straight forward and not difficult and so far I've only used it on a tandem axle flatbed but it did work really well. The fact that you see nothing but the little control knob makes it look really clean. Hopefully it will continue to impress. 681393

- 331-EBRH-ACCV2
by: Owen07/28/2019

Great product. Easy install. You could easily get a cheaper one, but the proportional braking is amazing. The dial is super easy to adjust on the fly. I would highly suggest this product for anyone looking for a brake controller for their trailer. 677601

- 331-EBRH-ACCV2
by: Scott07/25/2019

Bought a redarc TowPro Elite for my 2018 Titan, as well as the trim plate to mount in the dash. Installation could not have been easier. I chose to connect the wiring to the factory brake controller wiring harness. Two screws to remove the lower half of the dash and I was testing the controller out in 45minutes. The unit works as a proportional or user controlled brake for my 20 foot enclosed trailer and works wonderfully, now I can take both my motorcycles to the mountains and know my trailer won't be trying to roll over me on the downgrade. 677832

Show More Reviews

Ask the Experts about this Brake Controller
Do you have a question about this Brake Controller?

  • Redarc Tow Pro Elite Brake Controller Recommendation for 2018 Toyota Tacoma
  • To install the Redarc Tow-Pro Elite part # 331-EBRH-ACCV2 in your 2018 Toyota Tacoma only requires the correct install harness # 3031-S. This connector attaches directly to the connector you have under the dash of your 2018 Toyota and the other end wires to the brake controllers wiring with butt connectors. The colors all match between the two harnesses. The smallest mount plate we have for this controller is 1 inch by 1-1/2 inch and is part # 331-TPSI-001.
    view full answer...

  • Installing Redarc Tow-Pro Elite in 2018 Toyota 4Runner Using Tekonsha Wiring Harness
  • For the Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2 is an easy installation with the Tekonsha Wiring Harness # 3041-P. You will just use the white connector of the harness along with the wire length and cut off the other end of the connector in order to use butt connectors provided with the Redarc system and it's harness. It is simply color matching and securing the ground to a metal screw utilizing the eyelet. You can see this installation in the attached video and
    view full answer...

  • Comparing Redarc Tow-Pro and Tow-Pro Elite to Other Brake Controllers On The Market
  • The Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional # 331-EBRH-ACCV2 and the Tow-Pro # 331-EBRHV2 are different from their competitors in two ways. The first is their mounting location. The size of the controller allows mounting under the dash and puts the control within any normal dash mount location for a clean look that you won't hit your knees on and will allow for the newer knee air bag systems. The second is only in the Elite and its ability to switch
    view full answer...

  • Can RedArc Control Knob Be Installed Where 12V Power Outlet is in the 2018 Honda Ridgeline
  • On your 2018 Honda Ridgeline, we are not sure of the dimensions are of the 12V power outlet, but me and my contact at RedArc confirm that it should be able to be installed where the finger is pointed in your attached picture. I will send a copy of the user manual for this product showing the required dimensions. Please note that all dimensions are shown in millimeters. Also, RedArc’s Universal Switch Insert Panel # TPSI-001 can be installed to offer a clean and stylish OEM installation.
    view full answer...

  • Installation of Redarc Tow Pro Elite on 2018 Chevy Silverado
  • To install the Redarc Tow-Pro Elite, part # 331-EBRH-ACCV2, in your 2018 Chevy Silverado 1500 use the # 3016-S adapter. The connector end plugs in to the port under your truck's dash and the blunt ends need to be wired to the Redarc controller color to color.
    view full answer...

  • Brake Controller Recommendation for 2014 GMC Acadia
  • For tight install areas and for best performance the Redarc Tow-Pro Elite part # 331-EBRH-ACCV2 with the install harness part # TM75269 will be your all around best option. I attached a picture that shows you how much dash space it takes up. The install harness part # TM75269 wires directly to the brake controller wiring under the dash of your 2014 GMC Acadia. The P2 part # 90885 and P3 part # 90195 are great options but they have to be installed level.
    view full answer...

  • Best Brake Controller for a 2019 Ford E-450 Cutaway
  • The best brake controller for your 2019 Ford E-450 Cutaway is the Redarc Tow-Pro Elite Trailer Brake Controller part # 331-EBRH-ACCV2. The Tow-Pro Elite is very similar in design to a factory trailer brake controller. There is a control box that gets installed under the dash, out of sight and then a control knob that gets mounted on your dash wherever you prefer. This will provide a very clean look and will allow you to mount it in many different locations whereas a standard brake controller
    view full answer...

  • Where to Mount the Tow-Pro Elite # 331-EBRH-ACCV2 on a 2017 Chevrolet Silverado 1500
  • The great thing about the Tow-Pro Elite # 331-EBRH-ACCV2 is it's versatility when it comes to choosing a location to install the control knob. Since the control knob is smaller and the box that it connects to learns the direction of travel as you drive you can virtually mount it anywhere. If you check out the attached picture and installation video you can see that we mounted it in the center console for one application. If you would like a clean looking installation you can use the
    view full answer...

  • Correct Wiring Adapter for Redarc Tow-Pro Elite Trailer Brake Controller on 2018 Toyota Tacoma
  • The wiring adapters that you asked about for the Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2 will function the same though # 3031-S is the newer adapter and the one I recommend for your Redarc brake controller. As for a weight distribution hitch, to choose the best system, you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your 2018
    view full answer...

  • Recommended Brake Controller and Wiring for 2018 Subaru Outback
  • For your 2018 Subaru Outback Wagon, the best electric trailer brake controller is the Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2. This is simply due to the sleek design and factory look. If you don't care about the factory look, then I recommend the Tekonsha Prodigy P3 # 90195 because it is an easy to use controller with the LCD screen for easy diagnostic information. I've attached videos to assist. To install a brake controller in your Outback, I recommend starting
    view full answer...

  • Best Hidden Brake Controller for a 2018 Jeep Grand Cherokee
  • I do have a similar type of brake controller for you but the Reese Towpower Compact IQ Brake Controller part 8508700 is just not a very popular option hence why we do not currently carry this controller. Instead, I recommend the Redarc Tow-Pro Elite Trailer Brake Controller part # 331-EBRH-ACCV2 which has the same hideaway design as the Compact IQ. The Tow-Pro Elite is one of the most innovative controllers on the market. The control box that this controller uses can be mounted anywhere
    view full answer...

  • Mounting Panel for Redarc Tow-Pro Elite Brake Controller Knob on 2016 Toyota Sequoia
  • We have the exact part you need for your Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2. The Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob # 331-TPSI-002 is a custom fit for many Toyota vehicles, including your 2016 Toyota Sequoia.
    view full answer...

  • Control Knob Mounting Plate for Toyota Sequoia to Allow Installation of Red Arc Tow Pro Elite
  • Yes, you can use the custom Mounting Panel for the Redarc Tow-Pro Elite, part # 331-TPSI-002, to install your brake controller # 331-EBRH-ACCV2 in your Sequoia. This panel is shown installed in the photo I linked for you. Depending on the exact spot where you choose to install the control know you may not need the plate. You can refer to the linked video to see an installation.
    view full answer...

  • Comparing Curt Spectrum and Redarc Tow-Pro Brake Controller for 2018 Toyota Tundra
  • Both the Redarc Tow-Pro Elite # 331-EBRH-ACCV2 and the Curt Spectrum # C51170 Trailer Brake Controller offer a sleek OEM design that gets away from the traditional knee knocker mounted options that take up a lot of space in the cab. Between these two brake controllers though I do recommend going with the Redarc # 331-EBRH-ACCV2 for a couple of reasons. The first reason is an aesthetic one. One of the main benefits of both controllers is the subtle design that tries to blend in with
    view full answer...

  • Install Harness Needed to Install Redarc Brake Controller in 2016 Ram 1500
  • The Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2 can be installed in your truck but you'd also want the install harness # 3024-P which you would need to cut the black connector off of and you'd be able to then plug the gray connector into the port on your truck and then wire the rest of the wires to the brake controller's wiring.
    view full answer...

  • Brake Controller Recommendation for 2018 Ford F-150 with 7-Way
  • The Redarc Tow Pro Elite brake controller part # 331-EBRH-ACCV2 is a really great option that only needs the install harness part # 331-TPH-007 to install in your 2018 Ford F-150. This harness plugs into the controller and then into the port under the dash of your truck and the wiring aspect is done. It's a really nice controller too since, like you mentioned, it only has a really small knob that gets mounted on the dash or console. The controller is also proportional which means that it
    view full answer...

  • Brake Controller Installation in 2019 Ford Ranger
  • We have not yet (as of April 2019) had a chance to install any wired trailer brake controllers on a 2019 Ford Ranger so for guidance I checked with my most trusted brake controller expert at Tekonsha. Based on what I could learn about the truck if the Ranger has a factory-installed 7-way it should have a standard brake controller connection port above and to the left of your left knee when seated; this will be near the kick panel. You will want to look for a connector that matches the
    view full answer...

  • Install Harness Recommendation for Installing Redarc Tow-Pro Elite in 2014 GMC Sierra 1500
  • You are on the right track. To install the Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2 in your 2014 GMC Sierra 1500 will require you to use the install harness part # 3016-S which is very similar to the # 3016 except it doesn't have the Tekonsha specific connector. Instead it has just the GM connector for the trucks wiring and 4 blunt cut wires to wire to the Redarc. You could use the # 3016 if you wanted to but you'd have to cut off the Tekonsha connector.
    view full answer...

  • Installing Voyager XP in 2014 Chevrolet Silverado 1500
  • To install your Tekonsha Voyager XP in your 2014 Chevrolet Silverado 1500, you will use the adapter harness # 3016-S. What you will want to do is match the wires on the harness to the wires on your brake controller color-for-color. The other end of the adapter will plug into your Silverado. You will find the plug under the dash, to the left of the steering column, just above the carpet. I have attached the installation instructions for this adapter for you.
    view full answer...

  • Brake Controller Install Harness Recommendation For 2018 Chevy Silverado 1500
  • A 2018 Chevy Silverado 1500 uses a different brake controller install harness from a 2006 model. You'd have to swap the harness for a part # 3016-S and you'd be set. You'll need to splice the wires of the # 3016-S to the wires of your controller matching color for color and you'd be set.
    view full answer...

  • Install Harness Solution for Husky Quest in 2017 Chevy Silverado 1500
  • What you need is the part # 3016-S for the Husky Quest controller you have to install it in your 2017 Chevy Silverado 1500. You'd have to cut off the square connector of the Quest and wire the wires by color.
    view full answer...

  • 2012 Chevy Silverado 1500 and 2010 Lexus GX 460 Brake Controller Install
  • On your 2012 Chevy Silverado no plug is present under the dash for the install of a brake controller, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. I attached an install video and help article that covers how this is done. To install this controller in a 2010 Lexus GX 460 will require the install harness part # 3040-P instead and a second install bracket part # 7686.
    view full answer...

  • Brake Controller Install Harness Recommendation for 2014 Chevy Silverado 1500
  • We have the brake controller install harness part # 3016-S which will plug into the port under the dash of your 2014 Chevy Silverado 1500 and will give you 4 blunt cut wires you can then wire to your brake controller. Or if you have a Tekonsha controller like the P2 part # 90885 you can use the part # 3016 and it will plug directly into the controller's connector as well.
    view full answer...

Info for these parts were:

Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Expert Research:
John H
Expert Research:
Adam R
Video by:
Kathleen M
Installed by:
Cole B
Test Fit:
Randy B
Video Edited:
Chris R
Written by:
Leah S
Video Edited:
Zach D
Test Fit:
Brent H
Video by:
Jonathan Y
Test Fit:
Robert C
Updated by:
Brian T
Updated by:
Hannah L
Test Fit:
David F
Updated by:
Kristina F
Updated by:
Matthew E
Updated by:
Laura H
Written by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924