

Videos
for Flint Hill Goods
Help Articles
for Flint Hill Goods
Expert Answers
for Flint Hill Goods
Rob, I believe the 55 mph speed rating is just a safety net. You can probably bump up your speed using good judgment. So like if you have a ton of cargo in the carrier you'll probably want to keep the speed down, but if not you can just go normal…
view full answer...Hello Jim, thanks for reaching out. We do have a hitch mounted carrier that works great for mobility scooters. Take a look at the Erickson Aluminum Mobility / Cargo Carrier #EM34JV. This is made of aluminum so it is strong and lightweight. It has a…
view full answer...The biggest difference is the size of the ramps. The Flint Hill Goods #FHG23ZR ramps are 6' long and 14-1/2" wide for each ramp. The Stallion #288-07489 ramps are 65" long and 20-1/2" wide for each ramp. The Stallion ramps are only…
view full answer...Hi Alan; as long as you don't have the factory OEM wheel liners you can use the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set #WT66MV on your 2025 Sierra 1500 Denali Ultimate.
view full answer...With the trailer only weighing 2,200lbs you'd be looking at roughly a 220lb tongue weight if the trailer was fully loaded. I have two different trailer dolly options depending on your needs. If you want a standard no-frills option the Flint Hill…
view full answer...If you really wanted to you could remove the 1-7/8 inch ball of the Flint Hill Goods Trailer Dolly part #FHG24ZR and install a different ball size...BUT it won't gain you anything by doing so and would only prevent you from using it with a…
view full answer...Hello Paul, that is a really good question. I just chatted with the folks at Mad Ramps, and they said they really cannot advise using the #MR54FR ramps for loading motorized wheelchairs into the back of a 2015 Ford Transit T-150 Van. The main concern…
view full answer...With the size of your Champion Generator 200953(23.4" wide, 27.9" long and 21.7" tall I recommend using the 32x48 Reese Solo Cargo Carrier #PS1040100. This has a 47-3/4" long by 31-3/4" wide inner tray and can support up to…
view full answer...Hey Gary, the etrailer hitch part #e44AR that fits your 2022 Honda Passport does have a matte black powdercoat finish which is very durable. It's on the inside and out so it will do a great job overall protecting the hitch. Then for trailer…
view full answer...The ride on the back of a trailer is very rough due to the extended distance from the axle so a lot of hitch mounted accessories like the Flint Hill Goods 30x50 Wheelchair Carrier part #FHG99ZR are not rated for this. Instead, I recommend using the…
view full answer...Hi Jordan, Ok, I think I can clear this up for you, and just to get the final answer for you, the maximum COMBINED weight a cargo carrier and its luggage can weigh in your current setup is 175 lbs (also, apologies for the caps but they don't…
view full answer...I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…
view full answer...
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"