Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.

John

Mankato, MN


Ventmate






Expert Answers about Ventmate

  • Replacement Vent Cover for an Elixir Vent
  • The part numbers you have referenced are numbers for the manufacturer of the vent, Elixir. I do not carry the Elixir vents but I do carry replacement vent covers for Elixir that are made by Ventmate and Ventline. To determine the cover you will want to check the size of the vent cover (14 inches x14 inches, 14-1/4 inches x 14-1/4 inches) and the hinge system that it uses. Since your vent cover says Elixir you will want to look at the Ventmate Vent Cover for Pre-1995 Elixir Trailer Roof...
    view full answer...

  • Determining Correct Replacement Vent For Heng Vent
  • In order to determine if we have a replacement cover/lid that will fit you are going to need to check a few things on the existing vent. I have included a link to all the lids we carry. Then, if the measurements work out, you have to go by the hinge style. The lids we carry will have a 3 point hinge, like # 69284, a 4 point hinge like # 61628, or a continuous hinge like # BV0554-01. If none of these are a match then you would need to replace the whole vent assembly. I have also included...
    view full answer...

  • Determining Correct Replacement Vent For Jensen 7000 Series Vent
  • You will want to measure your vent, not the actual vent cover on your trailer. You would measure the plastic framed opening of the vent. Most standard vent sizes are 14-1/2 by 14-1/2 inches, 14 by 14 inches, or 13 by 14 inches in size. I have linked all the trailer vent covers that we have available. If you can send me the dimensions of your vent I can determine the correct replacement vent cover.
    view full answer...

  • Replacement Fridge Vent and Base for Dometic Fridge
  • For your Dometic fridge the part # VM65528 is the correct part number for a replacement vent cap. I spoke to my contact at Camco and she informed me that the Camco RV Fridge Vent Cover part # CAM42161 is universal in design and as long as the dimensions of this cover match what you have it would work. This cover measures 26-1/4 inches in length, 7.3 inches in width and 2 inches tall.
    view full answer...

  • Roof Vent Covers for a 1979 Holiday Rambler
  • As long as your trailer is pre-1995 Elixir, then I can guarantee the Vent Cover, part # 61635, will work. I dont have information if they are an exact replacement for a Holiday Rambler, but if you already have Ventline vents on there, I would feel comfortable replacing the cover with the part # 61635.
    view full answer...

  • Need Replacement Roof Vent for Sno Pro Enclosed Trailer
  • The Sno Pro website shows their entire range of enclosed trailers and does indicate that their CargoPro Standard series includes a 14 x 14-inch manual roof vent. The part you referenced, # 61628 from Ventmate, is a replacement vent cover (not a complete vent assembly) for a Jensen roof vent. Sno Pro does not specify any particular brand of vents in their specifications. If you need a replacement vent cover only you can select it based on the type of hinge it has. We also offer complete...
    view full answer...

  • Replacement Roof Vent Covers for 2004 Fleetwood Prowler Travel Trailer
  • Since you are missing the original vent lids the best way to find the correct lid is to look at the vent and the hinges to determine which, if any, of the replacement covers we offer will fit. We carry a model for 3-point hinges, # 69284. For 4-point hinges we have # 61628 and # 63112. And for continuous hinges # BV0554-01, # BV0554-03, # BV0534-00, # BVD0449-A01, # BVD0449-A03, and # 61635. Another option is to call Fleetwood with the serial number of the trailer and they might...
    view full answer...

  • Replacement Lid For Bath Roof Vent With Fan On 2004 Trailer
  • The best way to find a replacement lid for your bath vent is to first take the measurements on your existing vent cover. Most standard vent lids are 14-1/4 inches by 14-1/4 inches, or 14 by 14 inches, or even 13 by 14 inches. If the name of the manufacturer is on the vent, it would help in finding a replacement. You can also look at the hinge on the vent lid and see how it is attached. I have attached a link to the product page for replacement vent lids and you can see the difference...
    view full answer...

  • Replacement Vent Cover for 1988 Terry Travel Trailer
  • We can help you with your vent to get you ready for travel trailer season! Most square trailer roof vents share very similar dimensions and the keys to finding the correct replacement part are the vent size and hinge type. If we cannot offer you the correct replacement lid by itself we should still be able to get you going with a replacement vent assembly. The linked page will take you to our main page for vents and replacement lids. Click on replacement lid at the top of the page...
    view full answer...

  • Replacement Roof Vent Cover for a Keystone Cougar 327RES 5th Wheel
  • The VentMate vent cover # 69284 will fit as long as your current cover has the same dimensions and same hinge style. Part # 69284 has a 3-point style, # 61628 has a 4-point style and # BV0554-03 will have a continuous style. The lid # 69284 you referenced fits 14x14 plastic frame vent openings and the lid itself measures closer to 13x13 inches. Take a look at the couple video reviews I included.
    view full answer...

  • Replacement Non-Powered Roof Vent Cover Options for an Itasca Sundancer Travel Trailer
  • I have located three possible solutions, including the option you originally requested for your Itasca Sundancer. We have three non-powered roof vent covers that may work for you. I attached a photo showing covers and dimensions for you to make the correct selection. For the Ventmate, # 69284, that you originally asked about, I have given you the hinge dimensions as well as the center dimensions. For this part the hinges are molded plastic. Another option we offer is the Ventline,...
    view full answer...

  • Replacing a 14 x 14 Vent Lid on a 1985 Kit Companion
  • The 14 x 14 measurement is a good place to start, but to determine the exact replacement vent lid you need, look at the hinge type you have. It will be a three-point hinge, a four-point hinge, or a continuous hinge. For a three-point hinge measuring 14 x 14, you would want replacement lid # 69284 or # CAM40153 Your options for a four-point hinge which measures 14 x 14 are # 61628, # CAM40154, or # CAM40160. The continuous hinges which measure 14 x 14 are # CAM40161, # CAM40155,...
    view full answer...

  • Trailer Roof Vent Cover Replacement for a 2007 Diamond Travel Trailer
  • The Trailer Roof Vent Cover for Pre-1995 Elixir Trailer Roof Vents, part # 63116, is most likely not the correct cover for your 2007 model Diamond trailer. If there is a rolled metal hinge attached to the vent cover, like the one on the Ventline Replacement Cover, item # BV0554-01, that is most likely the correct vent cover for your trailer. Check out the photos on our product page and compare them to your cover. If your trailer vent has plastic tabs at the rear, with holes through...
    view full answer...

  • Replacement Vent Lid for a Jensen 7000 Series Vent on a 2001 Winnebago Leisure Seeker
  • We have several vents that can be used as a replacement for Jensen vents. However, you will need to look at the images on the product pages, linked for you, and the dimensions of the opening the entire vent assembly fits in, not just the opening that the lid covers. The part numbers are: # 61628 # 69284 # 63112
    view full answer...

  • How to Pick Out Replacement Vent Cover for a Cargo Trailer
  • Most likely the roof vents on your 2010 cargo trailer are 14 inch by 14 inch. It sounds like you are looking for a replacement vent cover for your trailer. You will need to select the vent cover for the vent on your trailer by the manufacturer of the vent and the attachment style of the cover. It is hard to say. Some of the vent cover manufacturers, like Ventline, have changed attachment hardware in the past and there are two styles. The newer style, like the Ventline Replacement...
    view full answer...

  • Replacement Hengs and Jensen Vent Cover with Pin Hinge
  • To determine the correct replacement vent cover you will want to measure the actual outside to outside dimension of the housing that extends through your trailer roof. Standard vent cover sizes are 14 inches x 14 inches, 14-1/4 inches x 14-1/4 inches or 13 x 14 inches. You will also need to determine the type hinge your vent cover has. I have attached a photo showing covers and dimensions for you to make the correct selection. Most likely you will need part # 69284. I recommend...
    view full answer...

  • How to Remove the Hinge Pin to Replace the Roof Vent Cover of a Jensen Roof Vent
  • I spoke to my contact at Ventmate and he informed me that to remove the hinge pin from your old cover you will need to remove the screws from the ends of the hinge pin and then you will be able to slide the pin out. A replacement pin does not come with the Vent Cover for Jensen Roof Vents # 61628. You should be able to reuse the old one that is on your vent now.
    view full answer...

  • How to Pick Out Replacement Vent Cover for Jensen Roof Vent on Trailer
  • Expert Reply: We have several vents that can be used as a replacement for Jensen vents. However, you will need to look at the images on the product pages, linked for you, and the dimensions of the opening the entire vent assembly fits in, not just the opening that the lid covers. The part numbers are: # 61628 # 69284 # 63112
    view full answer...

  • Replacement Vent Cover For Jensen RV Roof Vent
  • I have attached a link to our product page for the Jensen replacement vent covers we offer. You will need to know what the hinge style is on your cover to find the right replacement. The vent covers we offer will have either a 3-point, 4-point, or continuous hinge.
    view full answer...

  • Replacement Roof Vent Lid Recommendation for a Hengs 71111-C Roof Vent
  • The roof vent you referenced is a Hengs 14 inch roof vent. The correct replacement lid is the part # 69284. I attached a review video for you to check out as well.
    view full answer...

  • Replacement Vent Cover for Dometic Americana Refrigerator in 2001 Coachman
  • We do offer a replacement refrigerator vent lid for Dometic Refrigerator Vents, part # VM65528 that you referenced. I pulled one of these from our warehouse to measure it. I found the overall size to be 27 x 10-3/4-inches and the spacing of the mounting hole centers to be 4-3/8- x 21-5/8-inches. The four mounting screws are included. Based on how close our measurements are I suspect this cover will work fine for you. Since it is made of flexible plastic, dimensions could change slightly...
    view full answer...

  • Vent Cover Recommendation for a Trailer with an Older Elixir Vent
  • Most likely you either need the part # 63116 that you referenced or the part # CAM40161. Both use the same continuous metal lip for a hinge but the difference is that the # 63116 that you referenced has two square protrusions on the top of the lid. See pic. Your best option will be to compare the product pictures of either of the covers I referenced and go with the one that matches yours. Sounds like you could be looking for a piano style hinge like the part # SH300 that is one piece...
    view full answer...

  • Replacement Cover for Jensen Trailer Roof Vent
  • We offer replacement lids in various materials and colors for several brands of trailer roof vents including Jensen. The link provided will take you to our main page for all trailer roof vent covers. Filters on the page will allow you to match your hinge type, cover material, color, etc. We offer a 14- x 14-inch cover for Jensen vents, part # 61628, which is a flat white cover with a 4-point hinge. I also included a link to our page for complete vent assemblies in case you decide to...
    view full answer...

  • Replacement Vent Cover Recommendation for a 2000 Sundowner Trailer Valuelite 2 Horse Trailer
  • Most all vent covers are similarly sized. You will need to select the vent cover for the vent on your trailer by the manufacturer of the vent and the attachment style of the cover. It is hard to say. Some of the vent cover manufacturers, like Ventline, have changed attachment hardware in the past and there are two styles. The newer style, like the Ventline Replacement White Dome Assembly, item # BV0554-01 , that you selected have the metal groove riveted to the back of the cover and...
    view full answer...

  • Replacement Vent Cover for 14-1/2 x 14-1/2 Opening on 2005 Fleetwood Camper
  • The main thing that you will want to look at when replacing your vent cover is the hinge. There are 3 types of hinges; 3 point, 4 point, and continuous (see attached pictures). You will want to make sure that your replacement vent cover has the same hinge type. The most popular vent cover with a 3 point hinge, which according to your pictures looks like what you have, I recommend the Ventmate Replacement Cover # 69284. This vent cover will fit the 14-1/2 measurement that you mentioned. I...
    view full answer...

  • Replacement Vent Lid for a 2002 Sundowner Horse Trailer
  • The replacement vent cover is going to have to be the correct size to seal up properly when closed. Replacement cover # 69284 fits a 14 x 14 inch vent hole for Heng's and 1995 and newer Jensen vents. It uses a 3-hinge design. Take a look at the video I have linked. Besides size the hinge style is important. There are also models with 4-point hinges and continuous hinges. I have linked all of the options for you.
    view full answer...

  • How to Determine the Correct Roof Vent Cover for a 1993 Car-Mate Enclosed Trailer
  • There are a few things to look at when looking for the correct replacement vent cover for your 1993 Car-Mate trailer. The first item that will help is knowing the manufacturer of the vent on the trailer, such as Elixir, Jensen, etc. The next thing that you will want to consider is the size of the vent itself. The Ventmate Vent Cover, # 63116, that you referenced is designed to fit plastic vent frames that are 14 inches by 14 inches. The actual outside to outside dimensions of this vent...
    view full answer...

  • Replacement Vent Cover for Elixir Trailer Roof Vent
  • When measuring for a compatible replacement vent cover on your camper, you will want to measure the opening that the vent assembly fits in. Typically, a standard size vent will be approximately 14 or 14-1/4 square inches. Looking at the picture that you attached and speaking with my contact at Ventline, it appears that you may have an Elixir Vent on your camper. The VentMate Vent Cover # 61635 fits 14 inch x 14 inch plastic frame vents for Elixir trailer roof vents manufactured before...
    view full answer...

  • Replacement 3 Point Hinge Roof Vent Cover on 1997 Georgia Boy Cruise Master
  • The vent you have uses a 3 point hinge. We carry two models that will work for you. Covers # 69284 and # CAM40153 will both work for you.
    view full answer...

  • Recommended Replacement Lid For Dometic Refrigerator Vent
  • The Replacement Lid for Dometic Refrigerator Vents, part # VM65528 is a replacement lid for Dometic new style refrigerator vents. This vent measures 27 inches long and 11-1/4 inches wide. If those match the dimensions of your vent, this will work for you.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.