Installing Roadmaster Wiring Diodes on 2020 Jeep Wrangler, Unlimited, and Gladiator Models
Technical BulletinSUBJECT/SUMMARY: Installing Roadmaster diode wiring kit on 2020 Jeep Wrangler, Unlimited, and Gladiator models.
PROBLEM: Installing Roadmaster diode kit on wires connected to the tail light housing (which is standard) results in shutdown of certain Jeep computer systems.
SOLUTION: Install the diode kit on the VEHICLE-side of the wiring for the tail lights.
I spoke with the tech at iN-Command and can verify for you that the iN-Command TPMS for RVs, Trailers, and Vehicles - Bluetooth - 4 Waterproof Tire Sensors #NCTP100 does have a range of up to 100 meters (about 330 feet). They did say this was the max…
You must run the hot lead to the battery when installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56407 on your 2021 Jeep Wrangler. The reason is because this is the only way to ensure your Jeep's wiring is…
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…
In order to flat-tow a 2012 - 2014 Honda CR-V with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low…
Hi Russ; you pretty much have everything you need right there with the exception of a few parts. I'm going to go ahead and list it all out here with links to make it easy for your to manage. You will need the following: -etrailer Invisible Base…
Hey Rick, I went through the install instructions of the Roadmaster Direct Connect base plate kit part #RM97RR and you actually trim out a whole in the shutters and reinstall them. They are not totally removed. Do you have a tow bar already?
Hey Kent, The Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights #RM-676 is a great tow bar to start off your component list with. It's going to include safety cables, a 7-wire to 6-wire adapter cable, and s 6-pole socket. You'll need the…