Hey John! Yes, the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-440-2-G-EZ-1K looks to be exactly what you're needing! What boat trailer do you have?
Hi Nathan! Great question, the Trimax Puck Lock for Trailer Door Hasps part #TMX46RR cannot be keyed alike. But we’ve got a solid option for you: the Trimax Puck Locks for Trailer Door Hasps part #TMX63FR. It’s a 2-pack that comes keyed alike, so one…
The UWS Truck Bed Chest #UWS01047 doesn't come with any mounting hardware and doesn't actually have any holes predrilled into it for mounting so it would be a custom job to mount it. That being said you could just drill through the bottom of…
It sounds like to me that you are wanting to attach shelves to the e-tracks in your box truck. If that is the case then what we have for this is the CargoSmart Shelf Track Brackets part #3481726 which I think is what you are looking for but if it is…
Hey Joe, thanks for the purchase of the B&W Continuum Weight Distribution #BW88FR and both things you are seeing are normal, as there is a limiter in the pressure relief valve. As for the ground clearance, that is also normal, though I completely…
The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…
Yes, the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 referenced in your question will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. Just note that the ST145/R12 tire will be…
The closest radial tire size we offer to your 4.80-12 bias ply trailer tire would be the Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140. This tire will be about an inch taller and wider than what you currently have. You will need to make sure…
You can install the Erickson Horizontal E-Track #E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track…
Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…
Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…
Erickson does offer a zinc-plated steel backing plate for use with their E-Track products like their ATV E-Track Tie-Down Kit #EM09160. Use part #e96RR. You can see this item's hole dimensions and spacing in the linked photo. Since your trailer…
Hey John! Yes, the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-440-2-G-EZ-1K looks to be exactly what you're needing! What boat trailer do you have?
Hi Nathan! Great question, the Trimax Puck Lock for Trailer Door Hasps part #TMX46RR cannot be keyed alike. But we’ve got a solid option for you: the Trimax Puck Locks for Trailer Door Hasps part #TMX63FR. It’s a 2-pack that comes keyed alike, so one…
The UWS Truck Bed Chest #UWS01047 doesn't come with any mounting hardware and doesn't actually have any holes predrilled into it for mounting so it would be a custom job to mount it. That being said you could just drill through the bottom of…
It sounds like to me that you are wanting to attach shelves to the e-tracks in your box truck. If that is the case then what we have for this is the CargoSmart Shelf Track Brackets part #3481726 which I think is what you are looking for but if it is…
Hey Joe, thanks for the purchase of the B&W Continuum Weight Distribution #BW88FR and both things you are seeing are normal, as there is a limiter in the pressure relief valve. As for the ground clearance, that is also normal, though I completely…
The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…
Yes, the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 referenced in your question will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. Just note that the ST145/R12 tire will be…
The closest radial tire size we offer to your 4.80-12 bias ply trailer tire would be the Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140. This tire will be about an inch taller and wider than what you currently have. You will need to make sure…
You can install the Erickson Horizontal E-Track #E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track…
Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…
Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…
Erickson does offer a zinc-plated steel backing plate for use with their E-Track products like their ATV E-Track Tie-Down Kit #EM09160. Use part #e96RR. You can see this item's hole dimensions and spacing in the linked photo. Since your trailer…
I think you folks are awesome. First your website is easy to navigate and your inventory and range of products are incredible, to say nothing about your very competitive prices. Within just a few hours of placing my order I received two emails from you. The first acknowledged my order and advised the item was in stock and would be shipped soon. The second email, a short time later, advised me that my order had shipped and provided me tracking information. It can't get any better than that.
Bruce
Thousand Oaks, CA
Organize Your Tools with Style and Efficiency
Tool organizers are essential for keeping your tools secure and easily accessible, whether you're on a ranch, in a camper, or just in your garage. Consider size, durability, and locking mechanisms when choosing the right one for your needs. A well-made or
Many tool organizers are designed for use in vehicles like campers or RTVs. They help keep tools from bouncing around during travel. Ensure the organizer is securely fastened to prevent movement and potential damage.
A well-constructed tool organizer should withstand regular use and transport. Look for solid construction and materials that resist rust and wear. Some may require minor touch-ups, like repainting scratched areas, to maintain their appearance.
Locking mechanisms vary in quality. Some may require adjustments or replacements over time. If security is a priority, look for organizers with robust locks or consider aftermarket solutions to enhance security.
While many tool organizers boast durability, not all are waterproof. It's important to check the specifications or any included documentation to confirm. If you plan to use it outdoors or in a camper, consider additional waterproofing measures.
Tool organizers come in various sizes, and not all tools may fit, especially larger items like hammers. It's crucial to check the dimensions and compare them with your tool collection to ensure a good fit.
Filters
