Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX).

Replacement handle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. Designed for TJD-12000 Series jacks.

Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.

Replaces the topwind handle with claw knob from your etrailer or Ram jack. Fits TJA-5000T and TJB, TJP, and TJDP Series jacks.

Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Grooved handle grip allows for comfortable, easy cranking. Designed for MJ-1000BBX Series jacks.

Replaces the corrosion-resistant, zinc-finished topwind handle from your etrailer or Ram 2,000-lb or 5,000-lb jack. Handle lets you to manually crank the jack. Designed for TJA-2000, TJA-2001, TJA-2002, TJA-2006, and TJA-5000 Series jacks.

Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks.

This steel rod lets you easily fine-tune your stabilizer jack's height. Insert the handle into one of the stabilizer's drop leg holes to crank the stabilizer into place.

All mounting hardware is included with this jack crank assembly. When installed, primed handle will extend 17-1/2" from your heavy-duty, square Pro Series jack.

Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 3K- 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, zinc finish. Designed for TJD-7000S Series jacks.

Replaces the crank handle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.

Replaces the topwind handle from your etrailer or Ram square, direct-weld jack with a 3K - 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, clear zinc finish and can be folded away for easy storage.

Replaces the entire hand crank assembly on your Trailer Valet swivel jack and trailer mover (STC-V211).

Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW750D or ORJW2SU). Corrosion-resistant zinc finish.

Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW350D, ORJW500D, or ORJW1SU). Corrosion-resistant zinc finish.

Replaces the crank handle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.

Replacement handle clip fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.

Replaces the sidewind handle for your Fulton XP10 series marine jack. Crank handle, pin, and bushing included.

Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks. 8" Long shaft offers increased clearance.

Replaces the crank handle on your Bulldog square, topwind Series 190 trailer jack. Red knob handle measures 9" long.

Kit works with Fulton F2-series swing-up jacks. Includes handle grip, groove pin and mounting hardware.

This crank handle will help you raise and lower your Stromberg Carlson scissor jack according to your needs.