This adapter converts an X-Connect connector to a standard SAE connector commonly found on traditional battery chargers. Lets you use your NOCO Genius battery charger with existing SAE accessories.

This polarity adapter solves issues of equipment with reverse polarity. Just plug in to existing SAE to swap polarity.

Use this Redarc 24V-to-12V adapter to connect your Redarc voltage monitoring gauge (sold separately) to a vehicle with a 24-volt ignition and lighting supply.

This weatherproof M6/M8 to SAE battery lead makes charging your 12.8/13.2-volt lithium battery a simple plug-in operation. LED battery monitor lets you know your battery status at a glance. SAE port can also be used to add power outlets to your ride.

This DC 2.5 mm adapter cable lets you power your heated apparel from a DIN 12 mm power outlet on your motorcyle or other vehicle. 90-Degree angled 12 mm plug ends in a 2.5 mm DC outlet. 24" Long cable with weatherproof seal for 2.5 mm DC outlet.

This weatherproof M6/M8 to SAE battery lead makes charging your 12-volt lead-acid battery a simple plug-in operation. LED battery monitor lets you know your battery status at a glance. SAE port can also be used to add power outlets to your ride.

Charge your battery through your MV Agusta diagnostic connector using this MV Agusta to SAE adapter. Works with OptiMate 1, 2, 3, 4, and 6 battery chargers. Includes a 15-amp in-line fuse.

Charge your battery through your Ducati diagnostic connector using this Ducati to SAE adapter. Works with OptiMate 1, 2, 3, 4, and 6 battery chargers. Includes a 7.5-amp in-line fuse.

This cable converts your Tecmate charger KET connection to an SAE connector. Use your existing Tecmate battery charger on an OptiMate SAE battery lead.

Heavy-duty M6/M8 to SAE battery lead for your car, boat or UTV. SAE connector includes weatherproof seal and openings for zip-ties to make mounting simple. 15-Amp in-line fuse.

Charge your battery through your EURO5 6-pin diagnostic connector using this EURO5 to SAE adapter. Includes a 7.5-amp in-line fuse. Rubber seal protects SAE connection from moisture and dirt.

This cable converts your older Tecmate charger battery cable to an SAE connector. Lets you use any of the OptiMate SAE adapter cables such as the SAE to 12-volt outlet or Y-splitter cable (sold separately - MA48BR, MA33BR).

This 40" long, weatherproof M8 to SAE battery lead makes charging your 12-volt lead-acid battery a simple plug-in operation. LED battery monitor lets you know your battery status at a glance. SAE port can also be used to add power accessories.

Heavy-duty M8/M10 to SAE battery lead for your UTV, boat, or car. SAE connector includes weatherproof seal and openings for zip-ties to make mounting simple. 15-Amp in-line fuse.