1. Home
2. Trailer Parts
3. Wheel Covers Hubcaps

Hello George, thanks for reaching out. We certainly should have a hub option for you. I see that your trailer has a 2,500 lb axle. We do carry hubs for this, but there are a few possible options depending on what bearings/spindle size your trailer…

The Americana Baby Moon Trailer Wheel Center Cap #AM90086 is designed to fit the 14" wheels on your 2021 Gulf Stream Vintage Cruiser 19MBS travel trailer.

You will need either the Phoenix USA Rear Wheel Center Cap Right Hand Thread #PXQ2010XL or Left Hand Thread #PXQ2010L if you have a 6-1/2" wide hub. Otherwise you will need the Right Hand Thread #PXQ2020 or Left Hand Thread #PXQ2020L if you have…

It looks like we currently only have 1 tire/wheel combo in the 13" size that is compatible with the Americana Baby Moon Trailer Wheel Center Cap #AM90086. That is the Loadstar ST175/80D13 Bias Trailer Tire with 13" Black Wheel #AM31241, but…

Baby moon hub caps are designed to fit a conventional steel wheel that has a raised ring like in the attached photo. Americana Baby Moon Trailer Wheel Center Cap part #AM90086 will fit a conventional steel 13" wheel as long as the raised ring on…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

The baby moon covers part #AM90086 that you referenced are what you need. We had a customer with basically the same trailer as yours send in a picture confirming these fit for their 2018 Vintage Cruiser. I attached a picture for you to check out as…

Just like the tires for your trailer, the combined load capacity of your wheels should at least match the loaded weight of your trailer. Ideally though they will have a larger combined capacity than your trailer weight to provide a nice safety…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

The wheel used on the #AM32395 Karrier 205/75-15 wheel doesn't have the retention clips or nubs stamped into it that would hold a hubcap in place (see photo). I have some options for you though. A conventional steel wheel like what's provided…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

Hi Daylen; all of our wheels are going to have zero offset since they're designed for trailers. I'm not sure if you need pure black or if black and silver will also work so I have a variety of options for you. The following wheels are all…