Weight Distribution Hitch - Fits 2 Inch Hitch, 600 lbs

Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…

Hello Tom, Thank you so much for the detailed information, especially having the Cat Scale weight so we know how your weight is distributed. I wish every customer was as thorough as you are. I really like the Equal-i-zer system that you have been…

Hey Scott, thanks for reaching out! I don't have the exact height of that bracket, but the bolt from the Equal-i-zer #EQ64FR that sits on top of the trailer frame is 5/8" in and of itself so you're looking at around 1-1/4" at the…

Hey Vernon, thanks for reaching out and providing all of the details! It sounds like you have the 10K Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 which will work just fine with the B&W Continuum #BW28FR.…

...is rated to tow heavier loads; the max GTW is 4,000 lbs and the max TW is 600 lbs. Even though your total towing weight capacity is determined by your car, the Class III hitch has less restrictions with what...

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

...700TW and 7k Lbs How ever last year we had a 2021 Camper with a TW about the same but it was only 32foot 7. It had more sway then what I would like. I had a harbor freight WDH and I believe that has...

...with one system having a maximum tongue weight range of 500-800lbs, and the other at 600-1,000lbs. However what sets one apart from the other is, the Curt # C17499 does not use a traditional washer design...

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

...weight between 1,200 lbs - 1,600 lbs and this will put you closer to that range. The 22K GTW item # WS99MR is going to be overkill. The 18.5K GTW Weigh Safe True Tow Weight Distribution Hitch item # WS37...

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…