Filter Results
Videos
for Weight Distribution Hitch
Help Articles
for Weight Distribution Hitch
Expert Answers
for Weight Distribution Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer...Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Hey Lucas, The Curt MV #C17050 is for total tongue weights between 500 lbs and 600 lbs only (600 lbs isn't actually the minimum), and for a 5,000 lb GVWR camper, the tongue weight is definitely going to exceed what this hitch is capable of. Your…
view full answer...Hey Jack, the Furrion Chill HE RV unit like the part #FR52PR is going to be your best solution. It is the quietest and draws the lowest amount of power at 11.2 amps compared to most similar options that are around 15. We've tested all of the…
view full answer...For a weight distribution system, there are always exceptions,but in general the systems with only bars and chains do not have sway control. They are adjustable in tension for different weight, but are a little more work. The bar systems whether…
view full answer...Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.
view full answer...The Equil-i-zer Weight Distribution with 4-Point Sway Control, like #EQ37041ET, differs from the Fastway e2 Weight Distribution with 2-Point Sway Control #FA92-00-0450, because it does utilize 2 more points of steel-on-steel friction at the head of…
view full answer...Hey lance, Yes, the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 does allow for backing up without requiring you to remove the spring bars. What's your trailer's fully loaded tongue weight? I can verify if this is going to…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…
view full answer...Filter Results
WD Only
$342.95 - $398.68
WD With Sway Control
$379.65 - $3,918.53
Weight Distribution Hitch Parts or Accessories
