Videos
for Weight Distribution Hitch
Help Articles
for Weight Distribution Hitch
Expert Answers
for Weight Distribution Hitch
Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…
view full answer...Hey Vernon, thanks for reaching out and providing all of the details! It sounds like you have the 10K Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 which will work just fine with the B&W Continuum #BW28FR.…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Hey Andrew, the Fastway e2 system part #FA92-00-0800 would be a great option for a weight distribution system and sway control for your 2022 Forest River Cherokee Alpha that has a 720 lb tongue weight. Have you used WD systems before?
view full answer......An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro...
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer......like the style of the Blue Ox that you were looking at. I prefer the brackets with the straight spring bars over the ones with the chains, I think they are way better for sway control. If you wanted...
view full answer...The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…
view full answer...The Equil-i-zer Weight Distribution with 4-Point Sway Control, like #EQ37041ET, differs from the Fastway e2 Weight Distribution with 2-Point Sway Control #FA92-00-0450, because it does utilize 2 more points of steel-on-steel friction at the head of…
view full answer......neither of these would properly distribute the weight and would instead make it worse because they're too highly rated for 350-500lbs of tongue weight. Instead I recommend the Blue Ox SwayPro Weight...
view full answer...Thanks for the link! I took a look and there's nothing that will work with your trailer's tongue. We're going to need to address your sagging issue by adding some suspension enhancement to your Silverado. If you could comment below on…
view full answer...