Best Watersport Carriers
Filter Results
$90.12 - $296.17
$129.99 - $258.95
$88.00 - $950.00
$137.04 - $598.95
$199.95 - $349.95
Videos
for Watersport Carriers
Help Articles
for Watersport Carriers
Expert Answers
for Watersport Carriers
Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…
view full answer......though to help keep the wind from lifting up on the board too much. If you don't already have a roof rack then I recommend checking out the Rhino-Rack Vortex StealthBar Roof Rack # JB0190. This uses...
view full answer...There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…
view full answer...Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898. BaseLine Towers…
view full answer...Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at the…
view full answer...Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put on an aftermarket rack to…
view full answer...Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…
view full answer...Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…
view full answer......Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber...
view full answer...The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…
view full answer...Videos
for Watersport Carriers
Help Articles
for Watersport Carriers
Expert Answers
for Watersport Carriers
Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…
view full answer......though to help keep the wind from lifting up on the board too much. If you don't already have a roof rack then I recommend checking out the Rhino-Rack Vortex StealthBar Roof Rack # JB0190. This uses...
view full answer...There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…
view full answer...Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898. BaseLine Towers…
view full answer...Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at the…
view full answer...Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put on an aftermarket rack to…
view full answer...Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…
view full answer...Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…
view full answer......Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber...
view full answer...The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…
view full answer...