1. Sports and Recreation
2. Watersport Carriers
3. Paddle Boardx
4. Square Barsx

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm…

Hey Katelyn, thanks for reaching out! I recommend picking up the Lockrack Surfboard Rack #LR97VR which can hold 1-2 surfboards and easily holds the boards with the adjustable arms. The best part about this rack is that the arms secure the boards…

Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #EBMK4. This gives you a 2-3/4" rise but…

Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898.…

'Sup Kevin (see what I did there?). I do have a solution for you, but the Thule SUP Taxi #TH810001 and the Yakima SUPDawg #Y04075 are not going to work with the TruXedo Elevate Rack System #TX24NV. The TruXedo system has crossbars…

Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at…

Hey Jason, Yes, The Yakima Skyline Roof Rack #Y99TB you were checking out includes the needed landing pads and towers, along with the crossbars. This will fit your 2021 Toyota Highlander as long as you have the flush factory rails running front to…

Hey Samantha, the Inno roof rack part number #IN47ZV that fits your 2024 Ford Maverick would be a great option for mounting a paddle board carrier to. Then for a paddleboard carrier the LockRack Universal X part #LR88FR would work great to carry…

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45…

Hey Katelyn, thanks for reaching out! I recommend picking up the Lockrack Surfboard Rack #LR97VR which can hold 1-2 surfboards and easily holds the boards with the adjustable arms. The best part about this rack is that the arms secure the boards…

Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #EBMK4. This gives you a…

Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898.…

'Sup Kevin (see what I did there?). I do have a solution for you, but the Thule SUP Taxi #TH810001 and the Yakima SUPDawg #Y04075 are not going to work with the TruXedo Elevate Rack System #TX24NV. The TruXedo system has…

Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at…

Hey Jason, Yes, The Yakima Skyline Roof Rack #Y99TB you were checking out includes the needed landing pads and towers, along with the crossbars. This will fit your 2021 Toyota Highlander as long as you have the flush factory rails running front to…

Hey Samantha, the Inno roof rack part number #IN47ZV that fits your 2024 Ford Maverick would be a great option for mounting a paddle board carrier to. Then for a paddleboard carrier the LockRack Universal X part #LR88FR would work great to carry…