1. Home
2. Sports and Recreation
3. Watersport Carriers
4. Roof Mount Carrierx
5. Bars with T-Slotsx

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…

Hey Katelyn, thanks for reaching out! I recommend picking up the Lockrack Surfboard Rack #LR97VR which can hold 1-2 surfboards and easily holds the boards with the adjustable arms. The best part about this rack is that the arms secure the boards well…

...of galvanized steel. As you've mentioned, the CoreBar has a higher capacity. The primary difference is that the JetStream bars feature the T-Slot channel at the top that allows quick and easy accessory...

Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898. BaseLine Towers…

Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at the…

Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put on an aftermarket rack to…

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

...eliminated the need to cut the rubber strip on the WingBar Evo, like part # TH711420) by using a 2-strip design where the mounting hardware for accessories that fit in the T-Slot fit between the rubber strips...

The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…