1. Home
2. RV & Camper
3. Water Shut Off Valve
4. Y Valvex
5. Metalx

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

Hello Jack, The minimum opening water pressure of the Replacement Check Valve/Vacuum Breaker for Factory RV Tank Flushing Systems - 1/2" MPT #A10-3050 is 40 psi.

The Camco garden hose shut-off valve #CAM20073 is designed for non-potable use. I recommend the brass version, #CAM20123, which is NSF/ANSI 61 certified. This is the certification for potable water piping (drinking water). I have linked videos on…

The Trailer Valet XL part #TVXL25 would be a great option for if you have a 2-5/16 inch ball coupler or the part #TVXL2 for if you have a 2 inch ball. I really like these options as they attach via the hitch ball and give you a very easy to use dolly…

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

To replace your Blue Ox Ascent Non-Binding Tow Bar #BX4370 you can either use the exact same bar, or what I recommend doing is actually using our etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR. This has adapters on the ends of the…

The Draw Tite hitch mounted spare carrier part #6715 would work great for you. It is compatible with the wheel bolt pattern you have of 6 on 5-1/2 inch and can be used in the hitch of your Grand Design Reflection.

Congrats on the new Jeep! It looks like the LOD signature bumper comes with the Blue Ox Off-Road Bumper Adapters item #BX88358 that fit the 1" D-rings so you will want to get a Blue Ox tow bar. I have linked a picture of the adapter below so you…

Yes, the Thule Snug Tite Hitch Lock and Anti-Rattle Device part #THSTL2 is a M12x1.75". It's the same pin used for all Thule hitch mount bike racks.

It sounds like you are trying to find what hitch height you need to set the 5th wheel hitch in your 2016 Ford F-250 to tow your 2016 Jayco Eagle 339FLQS. If that is the case then the only way to find this out will be my leveling your trailer and…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Given the issue you described and the fact that you have done a good job of troubleshooting and checking other potential sources for the issue, it sounds like the motor is going bad. Since you mentioned the landing gear working fine for a little bit…