Filter Results
Videos
for Water Shut Off Valve
Help Articles
for Water Shut Off Valve
Expert Answers
for Water Shut Off Valve
Hey Michael, Adding to or enhancing your suspension would help with body roll and side-to-side movement. When it comes to anti-sway bars you'll want to go with whichever is the thickest. The Hellwig #HE74GR is 7/8" thick so you can measure…
view full answer...To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
view full answer...Hello Jack, The minimum opening water pressure of the Replacement Check Valve/Vacuum Breaker for Factory RV Tank Flushing Systems - 1/2" MPT #A10-3050 is 40 psi.
view full answer......The Camco garden hose shut-off valve # CAM20073 is designed for non-potable use. I recommend the brass version, # CAM20123, which is NSF/ANSI 61 certified. This is the certification for potable water...
view full answer...The Trailer Valet XL part #TVXL25 would be a great option for if you have a 2-5/16 inch ball coupler or the part #TVXL2 for if you have a 2 inch ball. I really like these options as they attach via the hitch ball and give you a very easy to use dolly…
view full answer...Hi Dorothy, The Seaflo Diaphragm Pump #SE58FR would be a compatible replacement for your Shurflo 4008-101-F65, but it has a lower psi rating so you'd see a bit of a drop in pressure. Instead I recommend going with the Seaflo #SE57FR. This unit…
view full answer...Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…
view full answer...To replace your Blue Ox Ascent Non-Binding Tow Bar #BX4370 you can either use the exact same bar, or what I recommend doing is actually using our etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR. This has adapters on the ends of the…
view full answer...Congrats on the new Jeep! It looks like the LOD signature bumper comes with the Blue Ox Off-Road Bumper Adapters item #BX88358 that fit the 1" D-rings so you will want to get a Blue Ox tow bar. I have linked a picture of the adapter below so you…
view full answer...Yes, the Thule Snug Tite Hitch Lock and Anti-Rattle Device part #THSTL2 is a M12x1.75". It's the same pin used for all Thule hitch mount bike racks.
view full answer...It sounds like you are trying to find what hitch height you need to set the 5th wheel hitch in your 2016 Ford F-250 to tow your 2016 Jayco Eagle 339FLQS. If that is the case then the only way to find this out will be my leveling your trailer and…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…
view full answer...
