Vehicle Suspension - Off-Road/Performance, Hardware

Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.

...Highlights Protects Front Coil Springs: Limits suspension compression to prevent coils from becoming overstressed or binding. Improves Ride Comfort: Reduces harsh bottom-outs on rough roads, dips...

Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.

...on the road or trail. Great for Solid Axle Front Ends: A must-have upgrade for rigs running coils and solid front axles. Engineered to Work with OME: Part of the Old Man Emu ecosystem for properly...

...Emu suspension components for balanced, aligned performance. Ideal for Coil-Sprung Front Ends: A key upgrade for 4x4s with live axles and front coil suspension setups. Part of a Complete Alignment...

...must-have when installing taller front springs or leveling kits on radius arm trucks. Heavy-Duty Construction: Built to handle the load and abuse of off-road use, towing, and daily driving. Simple Bolt-On...

...must-have when installing taller front springs or leveling kits on radius arm trucks. Heavy-Duty Construction: Built to handle the load and abuse of off-road use, towing, and daily driving. Simple Bolt-On...

Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.

...front control arms. Uses Eccentric Bushings: Kit includes 4 precision-machined bushings that press into the leading arms. Improves On-Road Tracking: Helps your rig hold a line better and improves...

...caster - no effect on rear geometry. Fixes Post-Lift Geometry: Ideal for solid front axle rigs with altered suspension angles after taller coils. Smoother On-Road Feel: Helps your rig drive straighter and...

...off-road obstacles. Simple to Install: Bolt-on fitment with no cutting or fabrication needed. Integrated with OME Systems: Designed to work with Old Man Emu front suspension components....

Lifting the rear suspension can throw off your driveline angle - and that often leads to vibration. This rear driveline spacer kit helps realign the driveshaft and smooth out your ride before small problems become big ones.

...stop and axle - no fab work required. Part of the OME Suspension System: Designed to integrate with Old Man Emu coils and shocks for balanced suspension performance....

When coil springs compress too far, they can go solid, causing a harsh ride and potential damage. This rear bump stop spacer kit limits travel just enough to keep your springs working like they should, even when fully loaded.

...side-shift that can happen when the panhard geometry is off. Heavy-Duty Construction: Built to handle trail abuse and long-term use with lifted 4x4s. Easy Add-On During Install: Bolts on with your suspension...

...loaded or off-camber. Designed for OME Panhard Rods: Pairs perfectly with Old Man Emu suspension for a well-balanced setup. Bolt-On Installation: Installs with no cutting or welding - just bolt it in and...

...Maintain Handling: Reduces bump steer and side-shift that can happen when the panhard geometry is off. Heavy-Duty Construction: Built to handle trail abuse and long-term use with lifted 4x4s. Easy Add-On...

Lifting the rear suspension can throw off your driveline angle - and that often leads to vibration. This rear driveline spacer kit helps realign the driveshaft and smooth out your ride before small problems become big ones.

After a lift, the factory panhard rod bracket may no longer sit at the right angle. This bracket kit helps you fit an OME panhard rod properly - so your axle stays centered and your suspension works the way it should.

After a lift, poor alignment can mess with both your steering and your driveline. This kit dials in front caster and rear pinion angleso your rig tracks straight and your drivetrain runs smooth.

...and improves on-road handling and tracking. Supports Proper Tire Wear: Realigns suspension angles to prevent uneven wear and increase tire life. Front-End Specific Kit: Engineered for use on coil-sprung...

...side-shift that can happen when the panhard geometry is off. Heavy-Duty Construction: Built to handle trail abuse and long-term use with lifted 4x4s. Easy Add-On During Install: Bolts on with your suspension...

Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.

...track straighter over bumps and uneven terrain. Durable and Trail-Ready: Built from tough materials to handle off-road stress and long-term use. Simple Bolt-On Install: Mounts easily - no custom...