1. Home
2. Vehicle Suspension

Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.

Lifting the front of your rig or adding weight can push your coils to the limit. This front bump stop spacer kit helps prevent overstressing the springs - protecting ride quality and suspension longevity.

Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.

...to complement OME and other raised leaf spring setups. Simple Bolt-On Install: No cutting or welding - installs with basic hand tools and included hardware. Small Part, Big Impact: An easy upgrade that...

Lifting the front of your truck changes the angle of the radius arms - pulling on brake lines and throwing off suspension geometry. Drop brackets correct the angles and protect your brake lines from stretching too far on the trail.

Lifting your rig can push your coil springs to the limit - literally. This rear bump stop spacer kit helps prevent the springs from going solid at full compression, protecting your ride quality and suspension components.

After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.

After a lift, your front end can feel loose or wander at speed. This caster correction kit adds 2 degrees of positive caster, helping your steering feel more stable and centered - just like it should.

Adding bigger tires? Without the right bump stop spacing, your shocks can go solid on full compression. This front spacer kit helps protect your shocks and keeps your suspension working safely - even with upsized tires.

...components at full compression. Easy to Install: Bolt-on solution with no custom fabrication or guesswork required. Part of the OME System: Works with Old Man Emu coils, shocks, and suspension hardware for...

After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.

Lifting the front of your truck changes the angle of the radius arms - pulling on brake lines and throwing off suspension geometry. Drop brackets correct the angles and protect your brake lines from stretching too far on the trail.

After lifting your rig, the steering can feel vague or wander on the highway. This caster correction kit brings your front-end geometry back in line, restoring stability and helping your vehicle track straight again.

Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.

Lifting your rig can throw your axle off-center, especially in the rear. This extension bracket helps correct panhard rod angles - restoring axle alignment and handling when fitting an OME rod on a left-hand drive vehicle.

Lifting the rear suspension can throw off your panhard angle - and your handling. This relocation bracket re-centers the axle, corrects rear geometry, and raises the roll center to improve stability on- and off-road.

Lifting your rig can throw your axle off-center, especially in the rear. This extension bracket helps correct panhard rod angles - restoring axle alignment and handling when fitting an OME rod on a right-hand drive vehicle.

...to complement OME and other raised leaf spring setups. Simple Bolt-On Install: No cutting or welding - installs with basic hand tools and included hardware. Small Part, Big Impact: An easy upgrade that...

After a lift, the factory panhard rod bracket may no longer sit at the right angle. This bracket kit helps you fit an OME panhard rod properly - so your axle stays centered and your suspension works the way it should.

After a lift, poor alignment can mess with both your steering and your driveline. This kit dials in front caster and rear pinion angleso your rig tracks straight and your drivetrain runs smooth.

A lift can throw your steering geometry out of spec - leaving your rig with vague tracking and uneven tire wear. This caster correction kit brings your front end back into alignment with up to 4 degrees of added caster.

Lifting your rig can throw your axle off-center, especially in the rear. This extension bracket helps correct panhard rod angles - restoring axle alignment and handling when fitting an OME rod on a left-hand drive vehicle.

Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.

Fitting an OME panhard rod doesn't always line up with factory mounts - especially after a lift. This bracket helps correct positioning, making sure your axle stays centered and your handling stays tight.