1. Trailer Parts
2. Underbody Tool Box
3. 18 Inch Widex
4. UWSx

Hey Jim, When it comes to chucking I'd have to say that the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is going to be the better option over the Lippert/Curt Flex Air Pin Box #LC369535. The Gen-Y has a rubber torsion spring…

Hey Eric, I recommend going with the Bulldog Winch Trailer Winch #BDW66FR. This winch has a static line load of 9,800 lbs, has a line speed of 29 FPM, and has a free spooling clutch with a 360 degree gearbox that can be rotated so you can reach the…

The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter #CAB-C5G you referenced is not compatible with any cushioned or air ride 5th wheel king pin like the Trailair Air Ride 5th Wheel Pin Box #LC158778. There may have been a previous model that…

You can use the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter #CAB-C5G if you change out your pin box, but unfortunately the Trailair Air Ride #UF35-946215 that you have cannot be used with a gooseneck hitch adapter. We do have some options…

Hey David yes, the etrailer Hard Tonneau Cover #e75DR will work with your 2024 Toyota tundra with the deck rail.

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

You would have to drill through the box and use hardware obtained locally that matches the material you are mounting the box to. Other people have constructed trays that basically cradle the box and the trays are secure to the bottom of the trailer…

No, the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Chevy/GMC #BWRVB3705 is not going to work with your 2024 GMC Sierra 2500. You're going to want the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch…

Yes, about 99 percent of A-frame jacks use the same mounting pattern. The holes are generally 3 inches apart on center though it can vary ever so slightly which is why some jacks have slotted holes.

Hi Richard! It sounds like you're needing to install the Load Resistor Kit for LED Turn Signals #DI34ZR on the turn signals you've installed on your toolbox. Since LEDs don't require as much power as incandescent bulbs, sometimes we see…

The degrees represents the angle of the cone that is on the wheel bolt. If they are 90 degree then the cone is a 90 degree angle made by the angle created by each side of the bolt. A 60 degree lug bolt would have a 60 degree angle made by each sides…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…