1. Home
2. Truck Tool Box
3. 58 Inch Longx
4. Aluminumx

Hello Jeremy, I sent that number over to lippert and they were not able to find anything. Can you please send me a picture of the sticker if it is still on there? Should have a S/N number and and RPO number, I included a picture of what the stickers…

I do recommend using two pairs of the Ultra-Fab Chock and Lock Wheel Stabilizers #UF21-001070 for your triple axle trailer. Doing so is going to give you the best amount of stability to limit the front-to-back rocking motion that will occur when you…

Hey Steve, The B&W Patriot #BWRVK3255 you have would require base rails or a gooseneck hitch and an adapter in order to mount to the bed of the F-250. If you want to go with base rails then I recommend the B&W Custom Installation Kit w/ Base…

The UWS Truck Bed Chest #UWS01047 doesn't come with any mounting hardware and doesn't actually have any holes predrilled into it for mounting so it would be a custom job to mount it. That being said you could just drill through the bottom of…

The exact length of the Access tonneau cover part #A73FR is not available as we have requested this from them before but they have told us that as long as the tool box in the bed of your 2020 GMC Sierra 1500 6-1/2 ft bed is between 19 and 21 inches…

The overall height including the cap for the DeeZee Truck Bed Auxiliary Tank #DZ91752X that you referenced is 22-1/2 inches. We've found that it typically fits pretty easily under tonneau covers like what you see in the attached picture, but you…

There isn't a set rule, but I'd recommend bolting the e-track into place. The distance between fasteners will depend on the nature and structure of the floor of your trailer. If the metal floor has a sturdy wood backing, I'd attach the e…

Hello Brian; the 3/8" difference isn't enough to matter so you can use the #e89FV as a replacement. We do have the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb Round Trailer Axles #APUBR-8 for 3" diameter axles. This has 7" long…

Hey Andy, The Curt 4" Offset Ball for Double-Lock Gooseneck Hitch #C602 unfortunately isn't a fit for a factory gooseneck/puck system, but you can use the Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K #C60618.…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Nice question, I have some information for you below: First thing you need to do is figure out why style of pin box you have. Pin boxes are not universal and can be different from unit to unit even if the camper came from the same factory. If you…

The Rock Tamers Heavy-Duty Adjustable Mud Flap System for 2-1/2-Inch Hitches #ERT00110 requires at least 1-inch of available space on the ball mount shank. This 1-inch of clearance between the back of the ball mount face and the trailer hitch…