1. Home
2. Truck Tool Box
3. Gull-Wing Style - Standard Profilex
4. 60 Inch Longx

The UWS Truck Bed Chest #UWS01047 doesn't come with any mounting hardware and doesn't actually have any holes predrilled into it for mounting so it would be a custom job to mount it. That being said you could just drill through the bottom of…

Hello Brian; the 3/8" difference isn't enough to matter so you can use the #e89FV as a replacement. We do have the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb Round Trailer Axles #APUBR-8 for 3" diameter axles. This has 7" long…

Hello Jeremy, I sent that number over to lippert and they were not able to find anything. Can you please send me a picture of the sticker if it is still on there? Should have a S/N number and and RPO number, I included a picture of what the stickers…

There isn't a set rule, but I'd recommend bolting the e-track into place. The distance between fasteners will depend on the nature and structure of the floor of your trailer. If the metal floor has a sturdy wood backing, I'd attach the e…

The exact length of the Access tonneau cover part #A73FR is not available as we have requested this from them before but they have told us that as long as the tool box in the bed of your 2020 GMC Sierra 1500 6-1/2 ft bed is between 19 and 21 inches…

Hey Andy, The Curt 4" Offset Ball for Double-Lock Gooseneck Hitch #C602 unfortunately isn't a fit for a factory gooseneck/puck system, but you can use the Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K #C60618.…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Nice question, I have some information for you below: First thing you need to do is figure out why style of pin box you have. Pin boxes are not universal and can be different from unit to unit even if the camper came from the same factory. If you…

Hi Forrest; because of the way an agricultural 7-way is wired the #PK12-724 is not a good solution. The best thing you can do is run a 7-way blade and connect straight to the trailer. Right now you don't have a brake output pin and it sounds like…

The Rock Tamers Heavy-Duty Adjustable Mud Flap System for 2-1/2-Inch Hitches #ERT00110 requires at least 1-inch of available space on the ball mount shank. This 1-inch of clearance between the back of the ball mount face and the trailer hitch…

I have a way to attach an offset gooseneck ball to the Ram OEM prep package but the 4" Offset Ball for B&W Gooseneck Hitches item #BWGNXA4085 will only fit in the square receivers for the Turnover Ball Systems. Since your 2018 Ram 2500 has…

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…