Videos
for Truck Bed Step
Help Articles
for Truck Bed Step
Expert Answers
for Truck Bed Step
Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…
view full answer...Hey Heath, thanks for reaching out! The Curt A20 #C55DR and the B&W Companion #BWRVK3670 you're looking at are both excellent 5th wheel hitches, but I have to go with the Companion in this case simple because it is more robust and has a…
view full answer...The only possible option we have that would work with your 2023 Ford F-150 without LED's is the Curt item #C75WR. This custom fit T-connector plugs in behind your tail lights but only works if your truck came from the factory with a 7-way…
view full answer...I was able to reach out to Carr and got the image below with the mounting hole dimensions for the Hide Away Step #CARR501030.
view full answer...The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs #TL52XR (front) and #TL34FR…
view full answer...Hello Michael, thanks for getting in touch. The Replacement Extang Trifecta 2.0 Tonneau Cover #EX92480-20 is indeed for the 2020 Ford F-150 XLT with the 6.5' bed. This is the replacement tarp for the Extang Trifecta 2.0 part #EX92480 which is for…
view full answer...The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…
view full answer...Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does the Trifecta 2.0…
view full answer...Hey Dell, We do have a replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover #EX83VR that fits your 2021 Ford F-150 with a 5-1/2' bed, but it's actually a different part number than the one you mentioned. Instead, the right…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Good question, and he only difference in 5th wheel hitches for the long or short bed 2020 Ford F-250 Super Duty is that if you go with a short bed, you will need to get a sliding fifth wheel hitch in order to ensure that your trailer doesn't run…
view full answer...Hey Chris, The Yakima RuggedLine HD Mounting System for LockNLoad Platform #Y43DJ is not compatible with a 2021 Toyota Highlander unfortunately. If you have flush mounted rails that run from front to back then you could go with the following…
view full answer...Videos
for Truck Bed Step
Help Articles
for Truck Bed Step
Expert Answers
for Truck Bed Step
Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…
view full answer...Hey Heath, thanks for reaching out! The Curt A20 #C55DR and the B&W Companion #BWRVK3670 you're looking at are both excellent 5th wheel hitches, but I have to go with the Companion in this case simple because it is more robust and has a…
view full answer...The only possible option we have that would work with your 2023 Ford F-150 without LED's is the Curt item #C75WR. This custom fit T-connector plugs in behind your tail lights but only works if your truck came from the factory with a 7-way…
view full answer...I was able to reach out to Carr and got the image below with the mounting hole dimensions for the Hide Away Step #CARR501030.
view full answer...The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs #TL52XR (front) and #TL34FR…
view full answer...Hello Michael, thanks for getting in touch. The Replacement Extang Trifecta 2.0 Tonneau Cover #EX92480-20 is indeed for the 2020 Ford F-150 XLT with the 6.5' bed. This is the replacement tarp for the Extang Trifecta 2.0 part #EX92480 which is for…
view full answer...The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…
view full answer...Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does the Trifecta 2.0…
view full answer...Hey Dell, We do have a replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover #EX83VR that fits your 2021 Ford F-150 with a 5-1/2' bed, but it's actually a different part number than the one you mentioned. Instead, the right…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Good question, and he only difference in 5th wheel hitches for the long or short bed 2020 Ford F-250 Super Duty is that if you go with a short bed, you will need to get a sliding fifth wheel hitch in order to ensure that your trailer doesn't run…
view full answer...Hey Chris, The Yakima RuggedLine HD Mounting System for LockNLoad Platform #Y43DJ is not compatible with a 2021 Toyota Highlander unfortunately. If you have flush mounted rails that run from front to back then you could go with the following…
view full answer...