Videos
for Trimmer Racks
Help Articles
for Trimmer Racks
Expert Answers
for Trimmer Racks
The bearing kit you need for your trailer is part #BK1-100. This will include L44643 inner and outer bearings, and the seal with a 1.249 inside diameter. The kit also includes the races and a cotter pin. If you are replacing both sides of the…
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...The Pack'Em Racks #PK-6-OP1 themselves measure 46 inches. From the top mounting holes to the top of the racks they measure 36 inches. See attached picture.
view full answer...Yes, the Pack'Em Rack for Open Utility Trailers #PK-6-OP1 is compatible with your 2' high trailer sides. The supports don't necessarily have to rest on the floor of your trailer so you can raise them to whatever height is…
view full answer...I recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness item #RED63RR. This brake controller and harness will install inside your Silverado without cutting or splicing wires using the Tekonsha Plug-In Wiring Adapter item #3064-P.…
view full answer...We definitely have something! For your Stihl blower, I recommend the Rack'Em Storage Rack for Enclosed Trailers - Adjustable #RA-39 along with the Utility Trailer Tower Kit for Pack'Em Ladder Rack or Rack'Em Blower Rack #PK-BMH. The…
view full answer...The Pack'Em Ladder Rack for Side Rail of Open Air Trailer - 2 Ladder #PK-28WL2-BMH is 46-1/2" tall x 2" wide x 1" deep, so anything taller would require customization as there isn't an extension designed for this system. If you…
view full answer...The note that says that the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 shouldn't be used on wet or icy roads is a little misplaced. This is related to the painted steel wheel that it has and its slightly…
view full answer...I spoke to my contact at Pack' Em and he informed me that your best option would be to install the Pack'Em Rack for Open Utility Trailers #PK-6-OP1 on your trailer but to install it about 12 inches from the floor of your trailer. Installing…
view full answer...In order to install the Pack'Em Rack for Open Utility Trailers part #PK-6-OP1 on your utility trailer, I recommend attaching the uprights to the wooden sidewalls of the trailer or trimming the wooden side walls to allow the uprights to sit flush…
view full answer...The tire and wheel combos we carry are not machined balanced. You can have the tire and wheel combos balanced at a local tire shop if you wanted to. What some manufacturers will do is line up the light spot on the tire with the heavy spot on the…
view full answer...If you were happy with the ground clearance that the trailer had with the old setup then I would recommend you stick with the way you had it with the axle below the springs. If you moved the axle above the spring you would lose ground clearance and…
view full answer...