1. Home
2. Trailer Parts
3. Trimmer Racks
4. Enclosed Trailerx
5. E Track Mountx

Yes, the Pack'Em Rack for Open Utility Trailers #PK-6-OP1 is compatible with your 2' high trailer sides. The supports don't necessarily have to rest on the floor of your trailer so you can raise them to whatever height is needed for your…

Hey Jake, that is a good question. I did some research to figure out what you're referring to, and I came to the conclusion that sometimes Hyundai has duplicates of these factory plugs (one on the driver side, and one on the passenger side). The…

Hey Brain! If by RV you mean a motorhome, the highest capacity bike rack we have is the Hollywood Racks Sport Rider SE item #HLY84FR, which tops out at 80 lbs per bike. So you would need to remove some weight like your batteries to get below the 80…

Pack 'Em doesn't offer a trimmer rack that would mount directly into a stake pocket. Your best bet would be to use wooden stakes and use those as attachment points for a trimmer rack like #PK-6S2 for one trimmer or #PK-6S-6S2 for two…

I do have some great spare tire options for you but I can't recommend using different size tires on a trailer, even in emergencies. In order to choose the correct spare you'll need to know but the lug pattern and tire load range. The Kenda…

The Pack'Em Shovel Rack for Open Utility Trailers #PK-BM-23 will hold up to 6 shovels and would work well for you. I attached an installed picture and review video for you to check out. Then for a trimmer rack the #PK-6 would work great too.…

I spoke to my contact at Pack' Em and he informed me that your best option would be to install the Pack'Em Rack for Open Utility Trailers #PK-6-OP1 on your trailer but to install it about 12 inches from the floor of your trailer. Installing…

The Pack'Em Rack for Open Utility Trailers part #PK-6-OP1 does not come with any of the added accessories shown on the product page (i.e. cooler, leaf blower, lawn trimmer). The accessories are included in the photo to give customers a better…

The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting brake…

The Peterson 426E is a grommet mount lamp which is 4 inches in diameter. We don't offer that particular lamp, but it cross referenced to several lamps offered by Optronics. Here's what's available: • #BU45CB is a in incandescent lamp that…

I spoke to my contact at Pack'Em and they informed me that you will not need an adapter to use your RedMax Blower EBZ8500 on the Pack'Em Rack for Open Utility Trailers part #PK-6-OP1. I have attached an install video of the above rack for you…

We do have Bearing Buddys with threads on them, but you'll need to verify fitment on your end: Stainless Steel - #BB1980T-SS fits a 1.980" hub bore Stainless Steel - #BB2080T-SS fits a 2.080" hub bore Stainless Steel - #BB2441T-SS fits…