Filter by Suspension Part
$785.69 - $1,227.06
Videos
for Trailer Suspension Parts
Help Articles
for Trailer Suspension Parts
Expert Answers
for Trailer Suspension Parts
Hey James, there isn't a specific trailer fit list for the upgraded equalizers like the MORryde part #MR87ZR but it is pretty easy to determine if this will fit or not. Measure the distance between the axle centers and if it's 33 inch this…
view full answer...Hey Denny! We can definitely help you out with that rough ride on your trailer. A pretty standard option is an upgraded equalizer like the MORryde you looked at. The best choice is always going to be the one that matches your current equalizer…
view full answer...We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…
view full answer...You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
view full answer...Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…
view full answer...Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer......should go with ones that measure a bit shorter than what you currently have. For example, if your leaf springs measured 26-1/8" go with the 26" long 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e...
view full answer......to the center bolt and the front and rear hangers are 1 1/2inch to the bolt hole. The equalizers are 5 3/4inch from hole to hole. What would the spacing be from center hanger to the front and rear hangers, thank...
view full answer...Hey Luis, We can answer both your questions in one as yes, you can change from the CRE3000 to AllTrek 4000, and it's definitely an upgrade worth making, as the AllTrek 4000 is better in a couple ways from the CRE3000. The first is the 4000 is…
view full answer...The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…
view full answer...Hello Lanny, thanks for reaching out. The CRE 3000 is already a pretty good suspension system, but if you want to upgrade, the first thing that comes to mind are the AllTrek 4000 equalizers. They have more rubber than the CRE 3000, 40% more, so you…
view full answer...Filter Products